Skip to content
CRANE MANUFACTURER SINCE 2002
info@hnksglobal.com+86 188 3620 7779Project enquiry ↗
Henan Mine Crane Request a quote
QDXG Galvanizing Crane Family

Galvanizing Overhead Cranes

Special overhead cranes for hot-dip galvanizing workshops and galvanizing production lines. QDXG configurations are engineered for zinc-pot maintenance, workshop equipment lifting, high-temperature material transfer and precision handling in hot, dusty and corrosive environments.

View Complete RangeRequest Galvanizing Crane Proposal
Henan Mine Crane galvanizing overhead crane
5–32 tCurrent QDXG configurable lifting range
10.5–31.5 mCurrent configurable span range
A5–A6Medium-heavy galvanizing workshop duty
5–25 m/minVFD-adjustable hoisting-speed range
Engineering Configurations

Complete Galvanizing Overhead Crane Range

QDXG galvanizing cranes are non-standard engineered systems. Single-girder, double-girder and no-blind-zone cantilever layouts are selected from zinc-pot position, workshop width, required maintenance coverage, load, lifting height, temperature and corrosion conditions.

Single-Girder QDXGLighter galvanizing workshop configuration Double-Girder QDXGHigher rigidity and demanding maintenance duty Cantilever QDXGNo-blind-zone zinc-pot maintenance coverage
Single-Girder Galvanizing Overhead Crane
QDXG — Single Girder Configuration

Single-Girder Galvanizing Overhead Crane

A lighter QDXG galvanizing-crane configuration for hot-dip galvanizing workshops where 5–32 t lifting capacity, high-temperature resistance and smooth VFD motion are required without the structural mass of a double-girder bridge. The exact girder and hoisting arrangement is engineered to the zinc-pot line and building layout.

5–32 t FamilyA5–A6Single Girder Option220–690 V
Technical Specifications
Rated Capacity5–32 t or customized
Span10.5–31.5 m or customized
Lifting Height6–24 m or customized
Working ClassA5–A6 or customized
Hoisting Speed5–25 m/min, VFD adjustable
Crane Travel Speed8–40 m/min
Crane StructureSingle-girder galvanizing configuration
Protection LevelIP54–IP55
Power Supply220–690 V / 50–60 Hz
ControlWireless remote / cabin control
Operating EnvironmentHigh-temperature, dusty and corrosive galvanizing workshop
Type-Test CodeQDXG
View Product Details → Request Configuration & Quote
Double-Girder Galvanizing Overhead Crane
QDXG — Double Girder Configuration

Double-Girder Galvanizing Overhead Crane

A higher-rigidity QDXG bridge configuration for galvanizing lines requiring larger lifting height, heavier workshop equipment maintenance or more demanding repeated operation. High-strength bridge construction and VFD motion are combined with high-temperature and dust-resistant protection.

5–32 t FamilyA5–A6Double Girder OptionHigh-Temperature Duty
Technical Specifications
Rated Capacity5–32 t or customized
Span10.5–31.5 m or customized
Lifting Height6–24 m or customized
Working ClassA5–A6 or customized
Hoisting Speed5–25 m/min, VFD adjustable
Crane Travel Speed8–40 m/min
Crane StructureDouble-girder galvanizing configuration
Main StructureHigh-strength structural steel
Key ComponentsSpecial alloy steel gears, wheels, drums and shafts
Protection LevelIP54–IP55
Power Supply220–690 V / 50–60 Hz
Typical DutiesEmpty zinc-pot lifting, workshop maintenance, high-temperature material transfer
Request model specification ↗ Request Configuration & Quote
Cantilever Galvanizing Overhead Crane
QDXG — Cantilever No-Blind-Zone

Cantilever Galvanizing Overhead Crane

A no-blind-zone galvanizing crane with a special cantilever arranged perpendicular to the main girder. The cantilever extends the usable hook coverage beyond the bridge envelope so zinc-pot maintenance and surrounding equipment can be reached without leaving inaccessible lifting zones.

Custom CantileverNo-Blind-Zone CoveragePrecision VFDZinc-Pot Maintenance
Technical Specifications
Rated Capacity5–32 t or customized
Span10.5–31.5 m or customized
Lifting Height6–24 m or customized
Effective Cantilever LengthCustom engineered to workshop layout
Cantilever DirectionPerpendicular to main girder
Working ClassA5–A6 or customized
Hoisting Speed5–25 m/min, VFD adjustable
Crane Travel Speed8–40 m/min
Protection LevelIP54–IP55
ControlWireless remote / cabin control
Main BenefitExtends lifting coverage outside the conventional bridge working envelope
Typical DutyZinc-pot lifting and maintenance-zone coverage
Request model specification ↗ Request Configuration & Quote
Configuration Comparison

Single Girder vs Double Girder vs Cantilever

Selection FactorSingle GirderDouble GirderCantilever No-Blind-Zone
Primary ObjectiveLower structural weight and general galvanizing liftingHigher bridge rigidity, larger lifting-height demand and demanding maintenance dutyExtend hook coverage beyond normal bridge envelope
Capacity FamilyWithin 5–32 t QDXG configurable rangeWithin 5–32 t QDXG configurable rangeWithin project-specific QDXG range
Working ClassA5–A6 or customizedA5–A6 or customizedA5–A6 or customized
Best Layout ConditionConventional production bay with moderate dutyHigher rigidity, heavier maintenance loads or repeated operationZinc pot or maintenance equipment extends outside conventional hook coverage
Special EngineeringHigh-temp / corrosion protection and VFD motionHigh-temp / corrosion protection and high-strength structureCustom cantilever length perpendicular to main girder
Galvanizing Process Selection

Choose the Crane by Handling Task

Empty Zinc-Pot Lifting

Crane structure, hook approach and maintenance coverage should be matched to the zinc-pot size, lifting points and replacement route.

Galvanizing-Line Maintenance

Workshop equipment, drives, guards and zinc-pot-area components require controlled lifting and access around fixed process equipment.

High-Temperature Material Transfer

Heat-resistant components and protected electrical systems support repeated handling near high-temperature process areas.

Long Steel / Structural Components

Galvanizing plants processing towers, guardrails, pipes and steel structures may require dedicated beams, multiple lifting points or long-load handling fixtures.

Continuous Production Lines

VFD speed control and smooth travel reduce shock, sway and contact risk around zinc pots and production equipment.

Maintenance Areas with Blind Zones

Cantilever configurations extend lifting coverage to spaces that a standard bridge hook path cannot reach.

No-Blind-Zone Design

Cantilever Coverage Around the Zinc Pot

Galvanizing crane cantilever layout drawing
Workshop Interface

Effective Cantilever Length Is Engineered from the Actual Line Layout

The QDXG cantilever is arranged perpendicular to the main girder and can extend beyond the bridge working envelope. This layout is used where zinc pots, access platforms or maintenance equipment would otherwise remain outside the normal hook coverage.

Required InputZinc-pot centerline, width, length and top elevation
Cantilever LengthCustomized from required hook coverage and building clearances
Hook ApproachChecked against pot wall, platform, column and maintenance obstruction
Bridge ClearanceChecked against roof beams, services and process equipment
Travel ControlVFD low-speed approach for maintenance positioning
High-Temperature & Corrosion Protection

Galvanizing Workshop Protection Configuration

High-Temperature Protection

Heat-resistant treatment, optimized heat dissipation and protected components are configured for the hot environment around galvanizing equipment.

Dust & Moisture Protection

IP54–IP55 electrical protection helps isolate controls and drive systems from workshop dust and moisture.

Corrosion-Resistant Configuration

Coatings and selected components can be upgraded for corrosive galvanizing environments and coastal installations.

VFD Precision Motion

Stepless speed regulation reduces sudden acceleration and load sway during approach to zinc pots and maintenance positions.

Emergency & Limit Protection

Travel limits, overload protection, emergency braking and anti-derailment functions protect high-temperature lifting operations.

Remote Monitoring Option

IoT-based condition monitoring can be added for operating-data review, fault information and maintenance planning.

RFQ Engineering Data

Information Required for a Galvanizing Crane Proposal

Project InputRequired InformationWhy It Matters
Zinc-Pot GeometryLength, width, top elevation and centerline positionDetermines hook coverage, cantilever length and maintenance access.
Handled LoadsEmpty pot, workpiece, maintenance equipment and maximum suspended loadDetermines crane capacity, structure and lifting attachment.
Building GeometrySpan, runway elevation, roof clearance, columns and platformsDetermines bridge type, headroom and reachable working envelope.
Operating CycleLifts/hour, hours/shift and annual production scheduleDetermines A5/A6 duty and drive sizing.
EnvironmentTemperature, dust, humidity and corrosive mediaDetermines protection level, heat resistance and coating system.
Control RequirementRemote, cabin, VFD precision, positioning or IoT monitoringDetermines the electrical and control package.
Factory Configuration Example

Galvanizing Special Overhead Crane Manufacturing

Henan Mine Crane galvanizing special overhead crane in factory
QDXG Special Crane

Customized Bridge Structure for Galvanizing Workshop Duty

The galvanizing-crane structure is produced around the project-specific span, lifting height, working envelope and maintenance requirements rather than as a fixed standard bridge. Single/double-girder structure, cantilever coverage, VFD motion and environmental protection are selected together.

QDXGHot-Dip GalvanizingCustom StructureVFDHigh Temperature
Engineering RFQ

Request a Galvanizing Overhead Crane Proposal

Provide the zinc-pot dimensions and location, maximum load, span, lifting height, maintenance coverage, ambient temperature, corrosion conditions and duty cycle. For no-blind-zone designs, include the required hook reach beyond the main bridge envelope.