Skip to content
CRANE MANUFACTURER SINCE 2002
info@cranehenanmine.com+86 188 3620 7779Project enquiry ↗
Get a project quote
HENAN MINE CRANE / SUSPENDED & UNDERHUNG OVERHEAD CRANES

LHDX Multi-Support Double-Girder Underhung Crane

A double-girder ceiling-suspended crane for extra-long-span industrial buildings and aircraft facilities.

A double-girder ceiling-suspended crane for extra-long-span industrial buildings and aircraft facilities. The multi-support structure spreads crane reactions over several roof supports while maintaining high bridge rigidity for large-component handling and precision assembly.

LHDXModel designation3–40 tRated load selection
LHDX Multi-Support Double-Girder Underhung CranePRODUCT CONFIGURATION / LHDX
THE LIFTING TASK

Designed for your handling path.

A double-girder ceiling-suspended crane for extra-long-span industrial buildings and aircraft facilities. The multi-support structure spreads crane reactions over several roof supports while maintaining high bridge rigidity for large-component handling and precision assembly.

Share the maximum suspended load, span, lifting height, operating cycle, runway details and control requirements.

01 / APPLICATION

Where it fits

A double-girder ceiling-suspended crane for extra-long-span industrial buildings and aircraft facilities. The multi-support structure spreads crane reactions over several roof supports while maintaining high bridge rigidity for large-component handling and precision assembly.

02 / EQUIPMENT

Crane arrangement

Suspended & Underhung Overhead Cranes.

MODEL LHDX

Technical configuration

Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.

Rated Capacity3–40 t
Span10–80 m
Lifting Height6–30 m
Working ClassA3–A5
Hoisting Speed0.5–16 m/min
Trolley Travel Speed2–20 m/min
Crane Travel Speed5–60 m/min
Suspension TypeMulti-support / multi-rail ceiling suspended
StructureDouble-girder underhung
Protection LevelIP54
Power Supply220–690 V / 50–60 Hz
Typical ApplicationAircraft manufacturing, hangars, large-span assembly and maintenance
BUYER'S SELECTION GUIDE

Specify the crane around the job.

A double-girder ceiling-suspended crane for extra-long-span industrial buildings and aircraft facilities. The multi-support structure spreads crane reactions over several roof supports while maintaining high bridge rigidity for large-component handling and precision assembly.

Compare the Suspended & Underhung Overhead Cranes range ↗
01

Load and lifting attachment

Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.

02

Runway and building interface

Confirm runway centers, wheel loads, building clearances and hook approaches.

03

Duty and controls

State typical load, lifts per hour, travel distance, shifts, control position and site power supply.

04

Model-specific check

Share the maximum suspended load, span, lifting height, operating cycle, runway details and control requirements.

TALK TO OUR ENGINEERS

Get a LHDX crane proposal.

Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.

Request a technical proposal ↗
  • Maximum lifted load and attachment
  • Span, travel length and available clearances
  • Daily lifting cycle and control choice
  • Power supply, environment and destination