Where it fits
Long loads and outside-span pickup
HENAN MINE CRANE / ELECTRIC HOIST GANTRY CRANES
L-Type Electric Hoist Gantry Crane
Clear the route for long loads.
The L-leg opening gives beams, pipe bundles and fabricated sections more passing room at the leg line. Check the actual load width and turning envelope before fixing the runway.
MHLModel designationProject-matchedRated load selection
PRODUCT CONFIGURATION / MHLTHE LIFTING TASK
Designed for your handling path.
The L-leg opening gives beams, pipe bundles and fabricated sections more passing room at the leg line. Check the actual load width and turning envelope before fixing the runway.
Crane arrangement
Single girder / L leg with Electric hoist and hook.
MODEL MHL
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Duty classA3–A5
Bridge / structureSingle girder / L leg
Lifting systemElectric hoist and hook
Rated capacitySelect from maximum load including lifting attachments
Crane spanSet from the required coverage and rail centers
Lifting heightSet from the pickup level and highest required hook position
Control arrangementPendant or radio remote to suit operator visibility
Power supplyMatch voltage and frequency to the destination site
Runway and foundationsCheck rail gauge, wheel loads and foundation design
Hook approach and clearanceConfirm required lifting envelope against the site drawings
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Long loads and outside-span pickup
Compare the Electric Hoist Gantry Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Rails and working envelope
Confirm rail gauge, runway length, foundation capacity, cantilever and end approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Load width at leg height; left/right cantilever; hook approach
PRODUCT PHOTOS
See the MHL configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a MHL crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
