Fit the attachment
Set beam reach and support points to the component and fixture.
AEROSPACE & PRECISION / LIFTING SOLUTIONS
Aerospace Rotating Beam Handling Solution
Long, high-value aerospace components need lifting support along their length and reliable orientation at each workstation.
Henan Mine Crane equipment for Aerospace research institute equipment delivery
THE LIFTING SOLUTION
Move long aerospace assemblies with controlled rotation and obstacle clearance.
Long, high-value aerospace components need lifting support along their length and reliable orientation at each workstation.
Configure a lower-rotating beam with automatically adjustable lifting gear. Closed-loop drives, anti-sway, obstacle detection and several control modes help move the component from pickup to precise placement without uncontrolled swing.
HANDLING SEQUENCE
How the solution works.
Follow the load through the operation to see where lifting equipment, tooling and controls must work together.
Travel and rotate
Control bridge motion and beam orientation along a cleared path.
Place under supervision
Use detection and remote status to verify clearance and final position.
ENGINEERING DECISIONS
What determines the final configuration?
These choices affect safety, process fit and the operating life of the installation.
Support geometry
Check deflection, load sharing and rotation envelope for the longest assembly.
Control modes
Define when remote, hand-held or local operation is permitted.
DELIVERED PROJECTS
Experience on real jobs.
See how cranes and lifting systems were configured for demanding operating environments.
PROJECT 01
Aerospace research institute equipment delivery
The project involved 24 lifting units accepted on site for an aerospace institute, including six lower-rotating beam cranes with PLC and variable-frequency closed-loop control, servo-adjusted lifting gear and obstacle detection.
RELEVANT EQUIPMENT
Equipment options for this solution.
These product families support the handling tasks above. The final crane and attachment are selected from the site brief.
SPECIFICATION BRIEF
What we need to size your crane.
Send the operating brief and the relevant layout drawings. The resulting proposal can address capacity, geometry, duty, controls, installation interface and safety requirements as one system.
Prepare your enquiry ↗- 01Assembly length and lift points
- 02Rotation and bay clearance
- 03Positioning accuracy requirement
- 04Control-mode and detection rules
NEXT STEP
Tell us what your crane needs to lift.
Start with a load schedule and site plan. Our team can help develop the matched crane arrangement and technical scope.
Start a project enquiry ↗