Support the part
Set attachment positions where the composite structure can be lifted safely.
AEROSPACE & PRECISION / LIFTING SOLUTIONS
Aerospace Composite Rotation Crane Solution
Composite aerospace parts can be long, sensitive to local contact and difficult to orient with a fixed hook.
Henan Mine Crane equipment for Xi'an aerospace composites institute
THE LIFTING SOLUTION
Rotate composite structures accurately during manufacturing.
Composite aerospace parts can be long, sensitive to local contact and difficult to orient with a fixed hook.
Use a lower-rotating crane with a dual-attachment arrangement matched to the actual fixture. Model the structure and verify rotation, load sharing and sub-millimeter control requirements against the test plan.
HANDLING SEQUENCE
How the solution works.
Follow the load through the operation to see where lifting equipment, tooling and controls must work together.
Rotate in the bay
Check sweep clearance and synchronized motion through the required angle.
Place at the fixture
Approach slowly and confirm alignment before release.
ENGINEERING DECISIONS
What determines the final configuration?
These choices affect safety, process fit and the operating life of the installation.
Fixture interface
Validate the part-support method and surface protection with the manufacturer.
Test precision
Specify how positioning accuracy will be measured under load.
DELIVERED PROJECTS
Experience on real jobs.
See how cranes and lifting systems were configured for demanding operating environments.
PROJECT 01
Xi'an aerospace composites institute
A lower-rotating crane for the Xi'an aerospace composites institute passed its load test. The unit used a dual-attachment design and a stated control-precision target below 1 mm.
RELEVANT EQUIPMENT
Equipment options for this solution.
These product families support the handling tasks above. The final crane and attachment are selected from the site brief.
SPECIFICATION BRIEF
What we need to size your crane.
Send the operating brief and the relevant layout drawings. The resulting proposal can address capacity, geometry, duty, controls, installation interface and safety requirements as one system.
Prepare your enquiry ↗- 01Composite dimensions and mass
- 02Fixture and lift-point drawings
- 03Rotation envelope
- 04Loaded positioning test method
NEXT STEP
Tell us what your crane needs to lift.
Start with a load schedule and site plan. Our team can help develop the matched crane arrangement and technical scope.
Start a project enquiry ↗