10 HENAN MINE CRANE MODELS / ONE PRACTICAL SHORTLIST

Electric Hoist Gantry Cranes Matched to Your Load Path

Compare full, semi, L-leg, truss and double-girder layouts against your load path, rail system and lifting cycle. Give us the site dimensions and lifting task to request a model-specific technical proposal.

Find your configuration Send your lifting brief ↗

10 crane models4 practical layout paths

Henan Mine Crane electric hoist semi-gantry cranes serving industrial production lines

FULL / SEMI / L-LEG / TRUSSSpecify the route before the crane.

START WITH THE JOB, NOT A MODEL CODE

Which constraint controls your crane?

The cheapest standard layout is only useful if the hook reaches the pickup point, the load clears the legs and the rails can carry the wheel loads. Choose the configuration below, then send the exact site dimensions for final sizing.

Two ground rails?

Start with a full gantry. Confirm rail centers, runway length and foundation reactions.

One side on a building?

Consider a semi-gantry. The elevated runway and building loads need engineering approval.

Long loads through the legs?

Compare L-leg clearance and cantilever positions against the widest load and vehicle path.

Bulk and packaged cargo?

Compare a grab-and-hook model using both load cases, attachment weight and changeover frequency.

BUYER CHECK

Include the hoist, grab, magnet or lifting beam in the total suspended load. Capacity and span shown as “By project” need a factory schedule for the exact site.

What to request in a quotation ↗

01 / FULL GANTRY

Single-girder & truss

Start with the load path: standard hook lifting, long-load clearance, or a truss bridge for exposed yards.

MODEL MH

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

Start here for routine hook handling.

Electric Hoist Gantry Crane

A full gantry with an electric hoist covers repeated lifting between ground rails. Define the load path and operating cycle first; the hoist and duty are then sized to the job.

USE IT FORGeneral material transfer between two ground rails

Technical specifications

Rated capacity	3–20 t (catalog)	Rail-center span	Up to 31.5 m (catalog)
Lifting height	By project	Work class	A3–A4 (catalog)
Structure	Full gantry	Lifting device	Electric hoist and hook
Confirm before quote	Maximum suspended load; rail centers; daily lift cycle

Request MH proposal View model details ↗

Henan Mine Crane L-Type Electric Hoist Gantry Crane (MHL)

MODEL MHL

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

Clear the route for long loads.

L-Type Electric Hoist Gantry Crane

The L-leg opening gives beams, pipe bundles and fabricated sections more passing room at the leg line. Check the actual load width and turning envelope before fixing the runway.

USE IT FORLong loads and outside-span pickup

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Single girder / L leg	Lifting device	Electric hoist and hook
Confirm before quote	Load width at leg height; left/right cantilever; hook approach

Request MHL proposal View model details ↗

Henan Mine Crane Electric Hoist Truss Gantry Crane (MHH)

MODEL MHH

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

A lighter structure for exposed yards.

Electric Hoist Truss Gantry Crane

The truss bridge reduces structural weight and presents less solid area to the wind. It is worth comparing where outdoor exposure and foundation reactions matter.

USE IT FOROutdoor yards with wind exposure

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Truss girder	Lifting device	Electric hoist and hook
Confirm before quote	Design wind; rail and foundation reactions; transport sections

Request MHH proposal View model details ↗

Henan Mine Crane New-Design Electric Hoist Gantry Crane (KSMH)

MODEL KSMH

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

A modern full gantry for repeat moves.

New-Design Electric Hoist Gantry Crane

The electric-hoist layout suits regular transfer of components along a defined rail route. Specify whether slow positioning, remote control or outdoor protection is needed.

USE IT FORProduction and logistics yards

Gantry cranes on the manufacturer KSMH product page in an industrial workshop

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Full gantry	Lifting device	Electric hoist and hook
Confirm before quote	Load spectrum; operating hours; control and weather scope

Request KSMH proposal View model details ↗

02 / FULL GANTRY

Double-girder

Compare trolley space, hook approach and required lift height before moving to a twin-girder bridge.

MODEL MHS

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

More bridge room, electric-hoist handling.

Double-Girder Electric Hoist Gantry Crane

Twin girders provide a different trolley and hook arrangement from a single-girder gantry. Compare it when hook approach, available lifting height or load geometry makes the bridge layout decisive.

USE IT FORFull-gantry yards needing a twin-girder bridge

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	By project
Structure	Double girder / full gantry	Lifting device	Electric hoist and hook
Confirm before quote	Hook approach; trolley position; lift height

Request MHS proposal View model details ↗

Henan Mine Crane New-Design Double-Girder Electric Hoist Gantry Crane (KSMHS)

MODEL KSMHS

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

Twin-girder coverage with smoother control.

New-Design Double-Girder Electric Hoist Gantry Crane

A full gantry combines a double-girder bridge and electric-hoist lifting for outdoor transfer. Match the hoist speed and travel control to the actual handling cycle.

USE IT FORFrequent outdoor transfer and controlled positioning

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Double girder / full gantry	Lifting device	Electric hoist and hook
Confirm before quote	Span; lift height; frequency and control requirements

Request KSMHS proposal View model details ↗

03 / ONE-SIDED RUNWAY

Semi-gantry

Use an elevated building runway on one side and a ground rail on the other. Check the building reaction and the available passage.

MODEL MB₁

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

Keep one side of the bay open.

Double-Girder Electric Hoist Semi-Gantry Crane

A double-girder semi-gantry uses an elevated runway on one side and a ground rail on the other. It can serve a building edge without placing a ground rail across both sides of the work area.

USE IT FORBuilding-edge handling with heavier bridge structure

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Double girder / semi-gantry	Lifting device	Electric hoist and hook
Confirm before quote	Building runway reactions; ground rail; clearances

Request MB₁ proposal View model details ↗

Henan Mine Crane New-Design Electric Hoist Semi-Gantry Crane (KSMB)

MODEL KSMB

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

A modern semi-gantry for tight sites.

New-Design Electric Hoist Semi-Gantry Crane

One ground rail and one elevated runway let the crane work beside a structure. Variable-frequency control can help when the load must be positioned smoothly.

USE IT FORSpace-limited yards beside a building

Semi-gantry cranes on the manufacturer KSMB product page in an industrial workshop

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Semi-gantry	Lifting device	Electric hoist and hook
Confirm before quote	Elevated support; control mode; ground-level clearance

Request KSMB proposal View model details ↗

Henan Mine Crane New-Design Double-Girder Electric Hoist Semi-Gantry Crane (MBES)

MODEL MBES

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

Two girders, one side on the building.

New-Design Double-Girder Electric Hoist Semi-Gantry Crane

Use this configuration where a semi-gantry is required but the hoist trolley, hook approach or load path calls for a double-girder bridge.

USE IT FORIndustrial bays with one elevated runway

Technical specifications

Rated capacity	By project	Rail-center span	By project
Lifting height	By project	Work class	A3–A5
Structure	Double girder / semi-gantry	Lifting device	Electric hoist and hook
Confirm before quote	Building reactions; hook approach; ground rail

Request MBES proposal View model details ↗

04 / ATTACHMENTS

Grab & hook

Size both lifting modes and define how the attachment changes during a normal working shift.

Henan Mine Crane Grab and Hook Electric Hoist Gantry Crane (MHZE)

MODEL MHZE

HENAN MINE CRANE / ELECTRIC-HOIST GANTRY

One runway for bulk and general loads.

Grab and Hook Electric Hoist Gantry Crane

The grab-and-hook arrangement serves loose material and conventional suspended cargo. Size both operating modes, including the grab self-weight and the maximum hook load.

USE IT FORMixed bulk-material and general-cargo yards

Technical specifications

Rated capacity	1–20 t	Rail-center span	6–30 m
Lifting height	4–18 m	Work class	A5
Structure	Full gantry	Lifting device	Grab and hook
Confirm before quote	Material density; grab volume; hook load; changeover frequency

Request MHZE proposal View model details ↗

PROJECT DELIVERY / WHAT TO VERIFY

A crane is only useful after it is installed and accepted.

Henan Mine Crane describes a process from site assessment and technical proposal through production, shipment, installation and commissioning. Obtain a project-specific scope and schedule in writing; generic website lead times are not a commitment for your model or destination.

01 / ENGINEERING

Freeze the site data

Agree on rated load, lifting attachments, rail centers, runway and foundation reactions, power supply, duty and weather conditions.

02 / MANUFACTURE

Define the factory checks

Require approved drawings, a component list and a factory test and inspection plan for the ordered configuration.

03 / SHIPMENT

Confirm the logistics scope

Write down the Incoterm, packing, export documents, dispatch milestone, freight responsibility and site unloading plan.

04 / HANDOVER

Plan commissioning and acceptance

Confirm who installs the crane, who supplies rails and power, the testing and training scope, handover records and service contact.

READY TO SPECIFY?

Get a crane schedule you can actually compare.

Send the heaviest suspended load, rail-center span, lifting height, runway length, load dimensions, operating cycle and destination. Ask for a general-arrangement drawing, wheel loads, hoist and travel speeds, controls, supply scope and delivery terms with the quotation.

Send your project brief Compare all gantry cranes ↗

INCLUDE WITH YOUR ENQUIRY

Maximum suspended load and load dimensions
Rail-center span, runway length and lifting height
Ground rail, foundation or building-runway drawing
Operating cycles, outdoor exposure and power supply
Required attachment, controls and destination