Electric Winch Prices
Compare JK, JM and double-drum winch budgets by application, rope arrangement and drive scope.
USD budget ranges · 30 October 2026 · 12 configurations
Electric winch price estimates by planning configuration
For preliminary indoor industrial equipment planning, allow about USD $1,500–$45,000 for the electric winch-only scenarios shown here. The band spans compact single-drum packages through heavier or more complex double-drum arrangements; it is a conditional planning estimate, not a supplier quotation or confirmed product schedule.
The tonne values below are budgeting scenarios only, not verified line-pull ratings or hook capacities for an exact JK, JM or double-drum model. Pulling force, reeving and load path are not interchangeable measures. Confirm the engineered data sheet before equipment selection.
Conditional, model-generated USD planning estimates for one winch package under the stated assumptions. No listed figure is a current manufacturer price, verified offer or binding quotation. Exact line pull, reeving, rope length, foundation, crane interfaces, controls and duty require engineering confirmation. Freight, export packing, duties, taxes and installation are excluded.
| Capacity | Product configuration | Planning specification | Equipment budget | Typical fit |
|---|---|---|---|---|
| 0.5 trated capacity | JK family planning scenarioSingle-drum, faster-speed winch package JK faster-speed family |
| USD $1,500–$3,500Planning estimate | Compact pulling/lifting task after line pull and reeving are verified |
| 1 trated capacity | JK family planning scenarioSingle-drum, faster-speed winch package JK faster-speed family |
| USD $2,200–$5,000Planning estimate | General winch application with a modest rated-load scenario |
| 2 trated capacity | JK family planning scenarioSingle-drum, faster-speed winch package JK faster-speed family |
| USD $3,500–$7,500Planning estimate | Powered drum where a faster nominal motion is desired |
| 5 trated capacity | JK family planning scenarioSingle-drum, faster-speed winch package JK faster-speed family |
| USD $6,000–$13,000Planning estimate | Higher-load single-drum planning case; confirm line pull and duty |
| 10 trated capacity | JK family planning scenarioSingle-drum, faster-speed winch package JK faster-speed family |
| USD $11,000–$24,000Planning estimate | Large single-drum planning case, subject to design review |
| 1 trated capacity | JM family planning scenarioSingle-drum, slower-speed winch package JM slower-speed family |
| USD $2,500–$5,500Planning estimate | Where slower drum motion is a planning priority |
| 2 trated capacity | JM family planning scenarioSingle-drum, slower-speed winch package JM slower-speed family |
| USD $4,000–$8,500Planning estimate | Slower-motion single-drum installation, line pull to confirm |
| 5 trated capacity | JM family planning scenarioSingle-drum, slower-speed winch package JM slower-speed family |
| USD $7,000–$15,000Planning estimate | General industrial single-drum planning case |
| 10 trated capacity | JM family planning scenarioSingle-drum, slower-speed winch package JM slower-speed family |
| USD $12,000–$26,000Planning estimate | Larger single-drum arrangement with project-specific rope geometry |
| 2 trated capacity | Double-drum arrangement; no verified fixed modelTwo-drum winch assembly Double-drum arrangement |
| USD $6,000–$14,000Planning estimate | Applications that need two separately managed rope paths |
| 5 trated capacity | Double-drum arrangement; no verified fixed modelTwo-drum winch assembly Double-drum arrangement |
| USD $10,000–$24,000Planning estimate | Two-rope system planning case with engineered synchronization |
| 10 trated capacity | Double-drum arrangement; no verified fixed modelTwo-drum winch assembly Double-drum arrangement |
| USD $18,000–$45,000Planning estimate | Heavy dual-rope planning case; supporting structure excluded |
No matching configuration. Choose another option or reset the filters.
What is included in an electric winch price estimate?
Each row budgets one indoor winch equipment package: drum assembly, motor/drive, brake and basic controls at a broad tonne planning scenario. The JK and JM labels describe the family route used on this site; they do not prove a specific model’s rated line pull, rope length, duty or exact speed. Double-drum rows are generic system allowances because the local directory has no paired, engineering-verified capacity table for that product route.
Allowance covers
- One single-drum assembly or one two-drum arrangement as named
- Basic drive, braking and control package for indoor planning
- Configuration-specific engineering still to be confirmed
Separate from the estimate
- Crane, gantry, structural frame, foundations and anchoring
- Sheaves, hook block, rope reeving and supporting structure unless specified
- Long-distance cable/festoon, site power and controls integration
- Export packing, freight, insurance, taxes, installation and commissioning
- Outdoor, marine, hazardous-area or heavy-duty special engineering
The public winch-cost pages found during research describe crane winch prices at a broad equipment/system level. They do not establish a comparable offer for these specific site product families, so they are kept as directional SERP references only. The ranges here are independently modeled planning estimates.
JK, JM or double drum: which planning case fits?
JK faster-speed family
The site's JK page describes a faster-speed electric winch family. The budget rows represent single-drum planning scenarios. Actual line pull, drum size, rope capacity, motor/control arrangement and operating duty must come from the selected data sheet.
JM slower-speed family
The JM page describes a slower-speed family, useful as a distinct planning category where controlled drum motion matters. Confirm whether the task is lifting or pulling, the rope speed under load, braking requirements and operating cycle before comparing its price with a JK package.
Double-drum arrangement
A two-drum arrangement can serve two rope paths, but it raises integration questions around independent drives, synchronization, brakes, rope routing, controls and support reactions. The local product route is visible, but its directory record does not pair an exact model and capacity schedule; the listed budget is therefore wider and explicitly generic.
Line pull is not automatically the hook load. Reeving, sheave geometry, friction and the mechanical arrangement change the relationship. Do not divide or multiply the table's tonne scenario into a final rope-force rating without an engineered calculation.
How does a 2–5 tonne winch planning budget vary by arrangement?
For a 2 t planning scenario, the table estimates USD $3,500–$7,500 for a single-drum faster-speed JK-type package, USD $4,000–$8,500 for a slower-speed JM-type package, and USD $6,000–$14,000 for a generic two-drum assembly. At 5 t, the corresponding assumptions are USD $6,000–$13,000, USD $7,000–$15,000 and USD $10,000–$24,000.
| Planning load label | Arrangement | Estimate | Key scope distinction |
|---|---|---|---|
| 2 t | JK single drum | USD $3,500–$7,500 | Faster-speed family allowance |
| 2 t | JM single drum | USD $4,000–$8,500 | Slower-speed family allowance |
| 2 t | Double drum | USD $6,000–$14,000 | Generic two-rope arrangement |
| 5 t | JK single drum | USD $6,000–$13,000 | Faster-speed family allowance |
| 5 t | JM single drum | USD $7,000–$15,000 | Slower-speed family allowance |
| 5 t | Double drum | USD $10,000–$24,000 | Two drum paths; coordination scope to define |
These are separate equipment scenarios, not a performance ranking. Matching the exact line-pull requirement, speed under load, rope capacity, reeving, duty and control logic can move an actual design outside the range.
What drives the price of an electric winch?
- Required line pull: define the rope force at the actual operating layer and any reeving arrangement; a load label alone does not define the winch.
- Drum and rope: rope diameter, length, number of layers, fleet angle and groove geometry change the drum and rope package.
- Speed and duty: speed under load, starts per hour, operating hours, load spectrum and braking cycle affect drive and thermal selection.
- Single vs double drum: an extra rope path can add drum, shaft/drive, brake and control integration needs. Independent or synchronized operation must be specified.
- Controls and supply: voltage, frequency, pendant/remote operation, VFD, interlocks and feedback requirements affect the electrical package.
- Mounting and environment: base, frame, sheaves, crane interface, outdoor exposure, corrosion or hazardous-area requirements require design-specific scope.
- Delivery and installation: packing, freight, import charges, site power, foundations and commissioning are excluded from the table.
Ask vendors to state the same force basis, rope-layer condition, rope length, speed, duty, control scope, supply boundary and delivery terms before comparing offers.
Heavy-duty, marine and multi-rope winch systems
The table is for broad indoor planning. Marine exposure, corrosive or explosive environments, continuous/high-cycle duty, long rope lengths and multi-part reeving need a separate specification. They can change materials, enclosures, bearings, brakes, drives and certification requirements; no generic premium is assumed here.
For a crane lifting mechanism, the winch must match the load path, sheaves, hook or attachment, structure and operating controls. For horizontal pulling, define anchorage, pull direction, line speed and the response if the load jams. A winch budget cannot establish that a complete lifting or pulling system is safe or suitable.
The local product library includes a JK parameter table whose unit labels and engineering status are not validated, plus a JM table with anomalous rows; neither has been used to assign exact capacity, power or dimensions to these budgets. The double-drum route has no paired parameter table. Obtain approved drawings and data for the chosen build.
Winch equipment price versus installed-system cost
Build the project budget from the equipment outwards. The preliminary ranges cover the winch assembly assumption only, not the structure and complete rope-handling system.
| Cost line | What to include or verify |
|---|---|
| Winch assembly | Drum(s), drive, brakes, controls and agreed accessories. |
| Rope path | Wire rope, sheaves, reeving, terminations, hook/block and guards. |
| Support structure | Base, frame, crane/gantry structure, reactions, anchorage and foundations. |
| Power and integration | Supply, isolation, cable route, controls interface, limits and emergency stops. |
| Delivery and import | Export packing, inland transport, freight, insurance, duties and destination taxes. |
| Site work | Installation access, lifting equipment, commissioning, testing and local inspections. |
Freight and installation are project-specific, so this guide does not apply a percentage uplift. Request a priced breakdown under named delivery terms and a drawing that identifies what is supplied and what the site must provide.
Electric Winches price questions
Compare the same lifting task, equipment scope and site responsibilities.
How much does an electric winch cost?
This guide estimates USD $1,500–$45,000 across the stated indoor single-drum and double-drum planning cases. The range is broad because capacity labels, rope path, drum arrangement, duty and controls change the package. It is not a live supplier quote.
How much does a 5 ton electric winch cost?
For the 5 t budgeting scenarios, estimate USD $6,000–$13,000 for a JK-type single-drum package, USD $7,000–$15,000 for a JM-type single-drum package, or USD $10,000–$24,000 for a generic double-drum assembly. These labels are planning assumptions; verify the actual line pull and arrangement.
What is the difference between a JK and JM winch?
The site product family routes describe JK as faster-speed and JM as slower-speed. Exact speed, force rating, rope capacity and duty depend on the selected model and approved data sheet. The table uses only family-level budget scenarios.
Does a 5 tonne winch safely lift a 5 tonne hook load?
The table does not establish that. The winch's line pull and the load at the hook differ when rope reeving and sheaves are used. Confirm the entire engineered lifting system, including rope, reeving, brakes, structure and applicable requirements.
Why does a double-drum winch cost more?
A second drum may require extra drive, braking and control equipment, plus coordination between rope paths. The actual difference depends on whether drums run independently or in a defined relationship and on the rope geometry.
Do these budgets include wire rope, sheaves or installation?
No by default. The estimates cover a broad winch assembly allowance only. Rope, sheaves, hook block, structure, foundations, site electrical work, freight, taxes, installation and commissioning should be itemized in the final offer.
Are these current Henan Mine Crane winch prices?
No. These are conditional, model-generated USD planning estimates, not verified prices, available stock or binding quotations. The exact application requires technical confirmation before a supplier can quote it.
Define the winch and rope path together.
Compare JK, JM and double-drum arrangements with Henan Mine Crane and confirm line pull, rope geometry, duty and system interfaces for your application.