Truss Gantry Crane (MGH)
Outdoor component handling with an open-truss full gantry arrangement.
All specifications
| Model | MGH |
|---|---|
| Crane arrangement | Truss-girder full gantry |
| Lifting attachment | Hook; lifting package selected in the technical offer |
| Rated suspended load | Selected for the load, complete attachment and rigging |
| Span | Selected from the runway centres and required working coverage |
| Lifting height | Upper and lower pickup levels specified with attachment depth and headroom |
| Working class | Selected for the load spectrum, lifts per hour and shifts |
| Hoisting performance | Lifting and positioning speeds specified with the selected mechanism |
| Trolley travel | Travel speed, stopping control and hook approaches selected for the task |
| Crane travel | Speed, runway length and stopping positions specified for the working route |
| Operating controls | Operator position and controls selected for visibility and the process |
| Electrical supply | Site voltage, phases, frequency and power-feed arrangement specified in the offer |
| Rail and civil interface | Rail section, wheel reactions and supporting foundations selected together |
| Outdoor design | Site wind exposure, parking restraint and environmental protection specified where applicable |
| Clearance envelope | Load passage, access and maintenance clearances shown in the arrangement drawing |
| Supply scope | Crane equipment, rail work, installation and commissioning responsibilities agreed in the quotation |
| Girder construction | Truss welded from structural steel sections |
| Cantilever | With or without cantilever, selected for the working reach |
| Published capacity range | 5–100 t; range reference, selected load/span/lift combination subject to proposal |
| Published span range | 18–35 m; selected with the rated load and crane geometry |
| Published lifting-height range | 6–30 m; useful hook height confirmed in the arrangement |
| Published working-class range | A3–A5; select class for the operating cycle |
| Published hoisting-speed range | 0.1–8 m/min; stepless reference, final lifting package specified |
| Published crane-travel range | 5–40 m/min; frequency-conversion control reference |
| Published trolley-travel range | 3–20 m/min; frequency-conversion control reference |
| Electrical protection reference | IP54 for listed electrical components; enclosure schedule defines the protected equipment |
| Published control alternatives | Cabin, wireless remote or combined controls, selected for visibility and the process |
| Leg-layout alternatives | A-type or U-type layout selected for the working envelope and structural design |
| Hoisting-package selection | Confirm the lifting mechanism and trolley package in the technical offer |


























