Skip to content
Henan mine crane co., ltd. Get a project quote
Henan Mine Crane · L-type lifting

L-Type Gantry Cranes

L-type gantry cranes use L-shaped legs to provide passage for long or bulky loads. Compare MHL electric-hoist, MDG single-trolley and MDE double-trolley models by lifting mechanism, load, span and usable hook coverage.

Manufacturer rendering of the MDG gantry crane arrangement

L-Type Electric Hoist Gantry Cranes

Electric-hoist lifting with L-shaped legs for load passage and side access.

Manufacturer rendering of the MHL gantry crane arrangement
MHL series

L-Type Electric Hoist Gantry Crane (MHL)

Long-load handling with L-shaped legs for side access and passage.

Capacity options1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options3–31.5 m
Working classA3–A5
All specifications
Model MHL
Rated capacity options 1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options 3–31.5 m, selected with the required load
Lifting-height options 6 / 9 / 12 / 18 / 24 / 30 m
Working class A3–A5, selected for the operating cycle
Lifting mechanism Electric wire-rope hoist
Girder arrangement Single girder
Supporting legs L-shaped legs for side access and load passage
Hoisting-speed options 8 or 8 / 0.8; 7 or 7 / 0.7; 3.5 or 3.5 / 0.35 m/min
Speed selection Choose one matched hoist speed package for the rated load
Crane-travel drive Three-in-one variable-frequency drive
Power supply 380 V, 50 Hz, 3-phase; site supply options
Operating controls Ground pendant / wireless remote / cabin
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Crane runway Two ground-level runway rails
Cantilever arrangement With or without cantilever
Clear passage Leg opening selected for the load and vehicle route
Hook coverage In-span lifting and agreed outside-span reach
Working motions Vertical lifting, hoist cross travel and crane long travel
Operating pattern Intermittent, repeated loading and material handling
Rail and wheel selection Matched to span, wheel reactions and foundation layout
Application focus Long loads and tasks requiring turning clearance between the legs

Single and Double Trolley L-Type Gantry Cranes

Compare one winch trolley for general loading with two trolleys for separated lifting points.

Manufacturer rendering of the MDG gantry crane arrangement
MDG series

L-Type Single Girder Winch Gantry Crane (MDG)

Winch lifting and loading with L-shaped legs for long-load passage.

Capacity range5–50 t model selections
Span range18–35 m
Lifting layoutWinch and hook
All specifications
Model MDG
Main-girder arrangement Single main girder
Lifting mechanism Winch hoisting mechanism
Leg geometry L-shaped legs
Rated capacity range 5–50 t; select the complete rated arrangement
Span range 18–35 m; select with load and site geometry
Operating controls Ground / remote / cabin options
Power-feed choices Cable or conductor-line supply
Crane-travel drive Three-in-one variable-frequency drive
System arrangement Gantry frame, winch hoisting, travel mechanisms and electrical controls
Load passage L-leg opening for long items and loads requiring large-angle turning
Application focus Outdoor loading and transfer in freight yards, terminals and similar areas
Useful lifting height Select upper and lower hook positions with rigging and load height
Working class Select from the load spectrum, handling frequency and shifts
Hoisting performance State lifting and positioning speeds for the chosen winch package
Trolley coverage Check hook approaches and required pickup / landing positions
Runway and wheel reactions Final rail section and wheel loads matched to the selected crane
Site power supply Specify voltage, phases, frequency and the power-feed route
Travel corridor Define runway length, stopping positions and vehicle clearance
Installation interfaces Agree crane assembly, rail work, foundations and commissioning scope
Manufacturer rendering of the MDE gantry crane arrangement
MDE series

Double Trolley L-Type Gantry Crane (MDE)

Two-trolley winch handling for long components through an L-leg opening.

Capacity range5–50 t model selections
Span range18–35 m
Lifting layoutTwo winch trolleys
All specifications
Model MDE
Base arrangement Double-trolley development of the MDG L-type single-main-girder crane
Lifting trolleys Two lifting trolleys
Lifting mechanism Winch hoisting mechanisms
Leg geometry L-shaped legs
Rated capacity range 5–50 t model range; individual and joint ratings selected in the offer
Span range 18–35 m; select with load and site geometry
Operating controls Ground / remote / cabin options
Power-feed choices Cable or conductor-line supply
Crane-travel drive Three-in-one variable-frequency drive
Load passage L-leg opening for long items and loads requiring large-angle turning
Application focus Outdoor loading and transfer in freight yards, terminals and similar areas
Permitted shared lifting Agree each trolley rating and any approved shared-load operating condition
Lifting-point spacing Select trolley separation and approaches around the load lifting points
Useful lifting height Specify each hook working level with rigging and load dimensions
Working class Select from each mechanism load spectrum and operating cycle
Motion performance State lifting / travel speeds and required independent or joint functions
Site power supply Specify voltage, phases, frequency and the power-feed route
Runway and foundations Match final rail geometry, wheel reactions and support interfaces
Operator control scope Agree visibility, control authority and permitted trolley operating modes

Capacity, span, lift and speeds form one selected configuration. Check clear passage with the complete workpiece and rigging; MDE trolley ratings and any shared lift must be agreed separately.

Budget planning

L-type gantry crane price guide

Budget around the lifting mechanism, load, span and clear passage. Single-trolley and double-trolley layouts need separate quotations.

Indicative equipment budget · 50 t reference configuration
L-type reference configuration Budget range (USD)
50 t L-type single-girder configuration · 18–35 m span · 10–12 m lift · EXW equipment scope USD 35,000–110,000

Indicative equipment budget for the configuration shown. This range does not cover every MHL, MDG or MDE arrangement. Shipping, installation and commissioning are excluded. Request an itemized quotation for your selected lifting mechanism, span and lifting height.

Confirm the hoist or winch arrangement, permitted loads, trolley spacing, cantilevers, lifting attachments, rails, power feed, taxes, freight and site work in an itemized quotation. Double-trolley and special-duty cranes require configuration-specific pricing.

Get a quote for your configuration
Illustrative handling example

Moving a long frame from truck to storage

Long fabricated frames need enough passage for the complete load and rigging. Compare the L-leg opening with the hook path from the truck pickup position to the storage supports.

MHL suits a selected electric-hoist arrangement; MDG uses winch lifting. Where two lifting points are needed, evaluate MDE around trolley spacing, the load at each hook and the permitted shared lift. This is a selection example, not a completed customer project.

Discuss your load and layout
MDG L-type single-girder winch gantry crane manufacturer rendering
MDG manufacturer rendering for layout reference; not a customer-project photograph.

L-type gantry crane buying questions

When should I choose an L-type gantry crane?

Compare an L-type arrangement when long or bulky components need to pass through the supporting legs. Check the opening at the suspended load height, including rigging, hook approaches and the complete pickup-to-landing route.

What is the difference between MHL and MDG?

MHL uses an electric wire-rope hoist; MDG uses one winch-lifting trolley. Select the lifting package against total suspended load, useful hook travel, duty and positioning requirements, then compare its physical envelope on the arrangement drawing.

Does an L-shaped leg automatically allow a load to turn?

No. The usable opening depends on the leg geometry, suspended height, workpiece orientation, rigging and mechanism position. Define the turning method and full movement envelope before choosing the arrangement.

Can the two MDE trolleys lift one load together?

Only within the individual ratings, load distribution, trolley separation and shared-load conditions agreed for the selected crane. The published 5–50 t model range is not a rating for each trolley or permission to add two hook ratings. Specify the required control modes.

Which dimensions are needed to compare L-type gantry cranes?

Start with total suspended load, rail-centre span and useful lifting height. Add workpiece dimensions, lifting-point positions, required leg opening, hook approaches and any cantilever reach. For MDE, include the required separation between lifting points.

What should the quotation include?

Ask for a matched crane configuration and drawing showing hook coverage, clear passage, wheel reactions and operating modes. Identify the scope for rails, power feed, foundations, freight, taxes, installation, commissioning and documents so the offers can be compared on the same basis.

Compare the range

L-type gantry crane specification comparison

Compare the lifting arrangement first, then match capacity and span to the load route. Select a full product name for the model details.

Swipe across the table to compare specifications.

Model / product Arrangement Capacity Span / working width Lifting height Working class
L-Type Electric Hoist Gantry Crane (MHL) Single girder / L-leg full gantry 1 / 2 / 3 / 5 / 10 / 16 / 20 t 3–31.5 m 6 / 9 / 12 / 18 / 24 / 30 m A3–A5, selected for the operating cycle
L-Type Single Girder Winch Gantry Crane (MDG) L-leg / single girder / winch 5–50 t options 18–35 m Selected for the task Selected for the operating cycle
Double Trolley L-Type Gantry Crane (MDE) L-leg / two winch trolleys 5–50 t model range; individual ratings by offer 18–35 m Selected for the task Selected for the operating cycle

Ranges describe model selections rather than every possible combination. Lifting height and working class for MDG/MDE, and individual or shared ratings for MDE, are confirmed in the technical offer.

Get an L-type gantry crane quote

Send the total suspended load, span, useful lifting height and destination. Add the component dimensions and any passage or turning requirement.

For MDE, include lifting-point spacing and the load at each point. A workpiece sketch or site photograph helps define the arrangement.

Request a quotation