Skip to content
Henan mine crane co., ltd. Get a project quote
Henan Mine Crane · Single-girder gantry range

Single-Girder Gantry Cranes

Compare single-girder gantry cranes for fabrication yards, stockyards and workshop loading. Choose electric-hoist, L-type, truss, semi-gantry or specialist handling configurations to suit the load and working area.

MH single-girder electric-hoist gantry crane

L-type winch-trolley gantry cranes

Choose open L-leg geometry for long loads and cargo that needs more passage space. Compare one- and two-trolley arrangements.

MDG L-type single-girder gantry crane
MDG

MDG L-Type Single Girder Winch Gantry Crane

Move long loads through open L-leg passages in outdoor yards and terminals.

Capacity range5–50 t
Span range18–35 m
Lifting mechanismWinch
All specifications
Model MDG
Main-girder arrangement Single main girder
Lifting mechanism Winch hoisting mechanism
Leg geometry L-shaped legs
Rated capacity range 5–50 t; select the complete rated arrangement
Span range 18–35 m; select with load and site geometry
Operating controls Ground / remote / cabin options
Power-feed choices Cable or conductor-line supply
Crane-travel drive Three-in-one variable-frequency drive
System arrangement Gantry frame, winch hoisting, travel mechanisms and electrical controls
Load passage L-leg opening for long items and loads requiring large-angle turning
Application focus Outdoor loading and transfer in freight yards, terminals and similar areas
Useful lifting height Select upper and lower hook positions with rigging and load height
Working class Select from the load spectrum, handling frequency and shifts
Hoisting performance State lifting and positioning speeds for the chosen winch package
Trolley coverage Check hook approaches and required pickup / landing positions
Runway and wheel reactions Final rail section and wheel loads matched to the selected crane
Site power supply Specify voltage, phases, frequency and the power-feed route
Travel corridor Define runway length, stopping positions and vehicle clearance
Installation interfaces Agree crane assembly, rail work, foundations and commissioning scope
MDE double-trolley L-type gantry crane
MDE

MDE Double Trolley L-Type Single Girder Gantry Crane

Position long cargo using two winch trolleys within an open L-leg layout.

Lifting layoutTwo winch trolleys
Model capacity range5–50 t; ratings by arrangement
Span range18–35 m
All specifications
Model MDE
Base arrangement Double-trolley development of the MDG L-type single-main-girder crane
Lifting trolleys Two lifting trolleys
Lifting mechanism Winch hoisting mechanisms
Leg geometry L-shaped legs
Rated capacity range 5–50 t model range; individual and joint ratings selected in the offer
Span range 18–35 m; select with load and site geometry
Operating controls Ground / remote / cabin options
Power-feed choices Cable or conductor-line supply
Crane-travel drive Three-in-one variable-frequency drive
Load passage L-leg opening for long items and loads requiring large-angle turning
Application focus Outdoor loading and transfer in freight yards, terminals and similar areas
Permitted shared lifting Agree each trolley rating and any approved shared-load operating condition
Lifting-point spacing Select trolley separation and approaches around the load lifting points
Useful lifting height Specify each hook working level with rigging and load dimensions
Working class Select from each mechanism load spectrum and operating cycle
Motion performance State lifting / travel speeds and required independent or joint functions
Site power supply Specify voltage, phases, frequency and the power-feed route
Runway and foundations Match final rail geometry, wheel reactions and support interfaces
Operator control scope Agree visibility, control authority and permitted trolley operating modes

Electric-hoist single-girder gantry cranes

Compare standard, L-type and truss arrangements for everyday lifting in workshops, warehouses and outdoor yards.

MH single-girder electric-hoist gantry crane
MH

MH Single Girder Electric Hoist Gantry Crane

Load and transfer materials across outdoor yards, warehouses and production areas.

Box-type reference3 / 5 / 10 / 16 / 20 t
Reference span12–30 m, by capacity
Lifting height6 m or 9 m
All specifications
Model MH
Rated capacity 3 / 5 / 10 / 16 / 20 t
Span options 12 / 16 / 20 / 24 m; 30 m on 5–20 t configurations
Lifting height 6 m or 9 m
Working class A3 at 3–16 t; 20 t duty selected with the HC hoist package
Girder construction Welded box girder / full gantry
Hoist type, 3–10 t CD1 single-speed or MD1 dual-speed wire-rope hoist
Hoist type, 16 / 20 t CD1 at 16 t; HC at 20 t
Hoisting speed, 3 / 5 t 8 m/min or 8 / 0.8 m/min
Hoisting speed, 10 t 7 m/min or 7 / 0.7 m/min
Hoisting speed, 16 / 20 t 3.5 m/min
Hoist cross-travel speed 20 m/min
Hoist motor, 3 / 5 t 4.5 kW / 7.5 kW, single-speed hoist
Hoist motor, 10 / 16 / 20 t 13 kW / 13 kW / 18.5 kW, single-speed hoist
Hoist-travel motors, 3 / 5 t 0.4 kW / 0.8 kW
Hoist-travel motors, 10 / 16 / 20 t 2 × 0.8 kW / 2 × 0.8 kW / 4 × 0.8 kW
Runway rails, 3 / 5 t P24 or P38, selected with span and wheel reactions
Runway rails, 10 / 16 / 20 t P38 or P43 at 10 / 16 t; P43 or P50 at 20 t
Power supply 380 V, 50 Hz, 3-phase
Operating temperature −20 °C to +40 °C for the specified equipment
Operating controls Ground pendant / cabin; remote control by configuration
Cantilever arrangement With or without cantilever; outside-span reach by design
Crane runway Ground-level rails on both sides
Operating pattern Intermittent, repeated material and component handling
Separate handbook structure MH truss-type references below are distinct from the box-type schedule and are not relabelled MHH
MH truss-type 5 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 37 / 42 · L1 (mm): 2000 · L2 (mm): 2000 · H1 (mm): 1120 · H2 (mm): 1100 · H3 (mm): 8265 / 11265 · B (mm): 4500 / 5900 · B1 (mm): 5200 / 6600 · B2 (mm): 5600 / 7000 · B3 (mm): 1500
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 40 / 46 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 1120 · H2 (mm): 1250 · H3 (mm): 8285 / 11465 · B (mm): 4500 / 5900 · B1 (mm): 5200 / 6600 · B2 (mm): 5600 / 7000 · B3 (mm): 1500
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 44 / 50 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 1120 · H2 (mm): 1350 · H3 (mm): 8485 / 11665 · B (mm): 4500 / 5900 · B1 (mm): 5200 / 6600 · B2 (mm): 5600 / 7000 · B3 (mm): 1500
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 48 / 54 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 1120 · H2 (mm): 1500 · H3 (mm): Confirm on ordered drawing · B (mm): 4500 / 5900 · B1 (mm): 5200 / 6600 · B2 (mm): 5600 / 7000 · B3 (mm): 1500
MH truss-type 10 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: ZDS1 1.5 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 97 / 102 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 1350 · H2 (mm): 1250 · H3 (mm): Confirm on ordered drawing · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: ZDS1 1.5 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 105 / 110 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 1350 · H2 (mm): 1500 · H3 (mm): 8750 / 11750 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: ZDS1 1.5 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 113 / 118 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 1350 · H2 (mm): 1650 · H3 (mm): 9000 / 12000 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: ZDS1 1.5 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 121 / 126 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 1350 · H2 (mm): 1650 · H3 (mm): 9000 / 12000 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: ZDS1 1.5 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 149 · L1 (mm): 7500 · L2 (mm): 7500 · H1 (mm): 1350 · H2 (mm): 1900 · H3 (mm): 12250 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
MH truss-type 16 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 143 / 150 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 2300 · H2 (mm): 1700 · H3 (mm): 10100 / 13100 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 152 / 159 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 2300 · H2 (mm): 2000 · H3 (mm): 10400 / 13400 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 165 / 174 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 2300 · H2 (mm): 2100 · H3 (mm): 10400 / 13400 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): Confirm on ordered drawing
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 169 / 176 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 2300 · H2 (mm): 2200 · H3 (mm): 10600 / 13600 · B (mm): 6500 / 7500 · B1 (mm): 7500 / 8500 · B2 (mm): 8000 / 9200 · B3 (mm): 1700
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 180 / 190 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 2300 · H2 (mm): 2500 · H3 (mm): 10700 / 13700 · B (mm): 6500 / 7500 · B1 (mm): 7500 / 8500 · B2 (mm): 8000 / 9200 · B3 (mm): 1700
MH truss-type 20 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data. The 20 t working class is confirmed in the offer.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 173 / 181 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 1825 · H2 (mm): 1600 · H (mm): 6000 / 9000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 188 / 196 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 1825 · H2 (mm): 1800 · H (mm): 6000 / 9000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 202 / 210 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 1825 · H2 (mm): 2000 · H (mm): 6000 / 9000 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): Confirm on ordered drawing
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 217 / 225 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 1825 · H2 (mm): 2200 · H (mm): 6000 / 9000 · B (mm): 6500 / 7500 · B1 (mm): 7500 / 8500 · B2 (mm): 8000 / 9200 · B3 (mm): 1700
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 228 / 236 · L1 (mm): 7500 · L2 (mm): 7500 · H1 (mm): 1825 · H2 (mm): 2400 · H (mm): 6000 / 9000 · B (mm): 6500 / 7500 · B1 (mm): 7500 / 8500 · B2 (mm): 8000 / 9200 · B3 (mm): 1700
MH box-type 3 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD 41-4 / 4.5 · MD1 hoist motor, model / kW: ZDS1 0.4 / 4.5 · Hoist-travel motor, model / kW: ZDY12-4 / 0.4 · Reference working class: A3 · Recommended rail: P24 /P38; final rail selection confirmed for the ordered wheel loads · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 37 / 42 · L1 (mm): 2000 · L2 (mm): 2000 · H1 (mm): 960 · H2 (mm): 650 · H3 (mm): 7635 / 10635 · B (mm): 4500 / 5500 · B1 (mm): 5000 / 6000 · B2 (mm): 5400 / 6400 · B3 (mm): 1500
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD 41-4 / 4.5 · MD1 hoist motor, model / kW: ZDS1 0.4 / 4.5 · Hoist-travel motor, model / kW: ZDY12-4 / 0.4 · Reference working class: A3 · Recommended rail: P24 /P38; final rail selection confirmed for the ordered wheel loads · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 40 / 46 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 960 · H2 (mm): 700 · H3 (mm): 7685 / 10685 · B (mm): 4500 / 5500 · B1 (mm): 5000 / 6000 · B2 (mm): 5400 / 6400 · B3 (mm): 1500
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD 41-4 / 4.5 · MD1 hoist motor, model / kW: ZDS1 0.4 / 4.5 · Hoist-travel motor, model / kW: ZDY12-4 / 0.4 · Reference working class: A3 · Recommended rail: P24 /P38; final rail selection confirmed for the ordered wheel loads · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 44 / 50 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 960 · H2 (mm): 800 · H3 (mm): 7785 / 10785 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1500
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD 41-4 / 4.5 · MD1 hoist motor, model / kW: ZDS1 0.4 / 4.5 · Hoist-travel motor, model / kW: ZDY12-4 / 0.4 · Reference working class: A3 · Recommended rail: P24 /P38; final rail selection confirmed for the ordered wheel loads · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 48 / 54 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 960 · H2 (mm): 900 · H3 (mm): 7885 / 10885 · B (mm): 5500 / 6500 · B1 (mm): 6000 / 7000 · B2 (mm): 6500 / 7500 · B3 (mm): 1500
MH box-type 5 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 54 / 59 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 1160 · H2 (mm): 800 · H3 (mm): Confirm on ordered drawing · B (mm): 4500 / 5500 · B1 (mm): 5500 / 6500 · B2 (mm): 6000 / 7000 · B3 (mm): 1500
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 · Reference working class: A3 · Recommended rail: P24 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 62 / 67 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 1160 · H2 (mm): 900 · H3 (mm): 8060 / 11060 · B (mm): 4500 / 5500 · B1 (mm): 5500 / 6500 · B2 (mm): 6000 / 7000 · B3 (mm): 1500
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 70 / 75 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 1160 · H2 (mm): 1000 · H3 (mm): 8160 / 11160 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1500
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 78 / 83 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 1160 · H2 (mm): 1150 · H3 (mm): 8310 / 11310 · B (mm): 5500 / 6500 · B1 (mm): 6500 / 7500 · B2 (mm): 7100 / 8100 · B3 (mm): 1500
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 8; MD1: 0.8 / 8 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 41-4 / 7.5 · MD1 hoist motor, model / kW: ZDS1 0.8 / 7.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 96 · L1 (mm): 7500 · L2 (mm): 7500 · H1 (mm): 1160 · H2 (mm): 1300 · H3 (mm): 11460 · B (mm): 5500 / 6500 · B1 (mm): 6500 / 7500 · B2 (mm): 7100 / 8100 · B3 (mm): 1500
MH box-type 10 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: Confirm on ordered drawing · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 97 / 102 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 1350 · H2 (mm): 1000 · H3 (mm): Confirm on ordered drawing · B (mm): 4500 / 5500 · B1 (mm): 5500 / 6500 · B2 (mm): 6000 / 7100 · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: Confirm on ordered drawing · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 105 / 110 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 1350 · H2 (mm): 1100 · H3 (mm): Confirm on ordered drawing · B (mm): 4500 / 5500 · B1 (mm): 5500 / 6500 · B2 (mm): 6000 / 7100 · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: Confirm on ordered drawing · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 113 / 118 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 1350 · H2 (mm): 1200 · H3 (mm): 8550 / 11550 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1600
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: Confirm on ordered drawing · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 121 / 126 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 1350 · H2 (mm): 1300 · H3 (mm): 8650 / 11650 · B (mm): 5500 / 6500 · B1 (mm): 6500 / 7500 · B2 (mm): 7100 / 8100 · B3 (mm): 1600
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 / MD1 · Hoisting speed (m/min): CD1: 7; MD1: 0.7 / 7 · Hoist travel speed (m/min): 20 · CD1 hoist motor, model / kW: ZD1 51-4 / 13 · MD1 hoist motor, model / kW: Confirm on ordered drawing · Hoist-travel motor, model / kW: ZDY21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 149 · L1 (mm): 7500 · L2 (mm): 7500 · H1 (mm): 1350 · H2 (mm): 1600 · H3 (mm): 12250 · B (mm): 5500 / 6500 · B1 (mm): 6500 / 7500 · B2 (mm): 7100 / 8100 · B3 (mm): 1600
MH box-type 16 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 143 / 150 · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 2300 · H2 (mm): 1100 · H3 (mm): 9500 / 12500 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P38 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 152 / 159 · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 2300 · H2 (mm): 1200 · H3 (mm): 9600 / 12600 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 165 / 174 · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 2300 · H2 (mm): 1300 · H3 (mm): 9700 / 12700 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): Confirm on ordered drawing
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 169 / 176 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 2300 · H2 (mm): 1400 · H3 (mm): 9800 / 12800 · B (mm): Confirm on ordered drawing · B1 (mm): Confirm on ordered drawing · B2 (mm): Confirm on ordered drawing · B3 (mm): 1700
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: CD1 · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 51-4 / 13 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 2 · Reference working class: A3 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): 190 · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 2300 · H2 (mm): 1600 · H3 (mm): 9900 · B (mm): 7500 · B1 (mm): 8500 · B2 (mm): 9200 · B3 (mm): 1700
MH box-type 20 t handbook reference Matched MH handbook reference. Keep the span, hoist, speeds and dimensions together. CD1 is single-speed and MD1 dual-speed where listed. Dimension symbols and wheel reactions require the ordered arrangement; cells marked Confirm on ordered drawing are not confirmed selection data. The 20 t working class is confirmed in the offer.
Reference 1 · Span (m): 12 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): Confirm on ordered drawing · L1 (mm): 3000 · L2 (mm): 3000 · H1 (mm): 2725 · H2 (mm): 1400 · H (mm): 6000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 2 · Span (m): 16 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P43 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): Confirm on ordered drawing · L1 (mm): 4000 · L2 (mm): 4000 · H1 (mm): 2725 · H2 (mm): 1600 · H (mm): 6000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 3 · Span (m): 20 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P50 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): Confirm on ordered drawing · L1 (mm): 5000 · L2 (mm): 5000 · H1 (mm): 2725 · H2 (mm): 1800 · H (mm): 6000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 4 · Span (m): 24 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P50 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): Confirm on ordered drawing · L1 (mm): 6000 · L2 (mm): 6000 · H1 (mm): 2725 · H2 (mm): 2000 · H (mm): 6000 · B (mm): 5500 / 6000 · B1 (mm): 6500 / 7000 · B2 (mm): 7000 / 7500 · B3 (mm): 1600
Reference 5 · Span (m): 30 Lifting-height options (m): 6 / 9 · Electric-hoist type: HC · Hoisting speed (m/min): 3.5 · Hoist travel speed (m/min): 20 · Hoist lifting motor, model / kW: ZD1 52-4 / 18.5 · Hoist-travel motor, model / kW: ZDY1 21-4 / 0.8 × 4 · Recommended rail: P50 · Reference power supply: Three-phase AC, 380 V, 50 Hz · Wheel-pressure entry (kN): Confirm on ordered drawing · L1 (mm): 7000 · L2 (mm): 7000 · H1 (mm): 2725 · H2 (mm): 2200 · H (mm): 9000 · B (mm): 6500 / 7500 · B1 (mm): 7500 / 8500 · B2 (mm): 8200 / 9200 · B3 (mm): 1700
MHL L-type single-girder electric-hoist gantry crane
MHL

MHL L-Type Electric Hoist Gantry Crane

Transfer long loads where L-shaped legs provide side access and passage clearance.

Capacity options1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options3–31.5 m
Working classA3–A5
All specifications
Model MHL
Rated capacity options 1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options 3–31.5 m, selected with the required load
Lifting-height options 6 / 9 / 12 / 18 / 24 / 30 m
Working class A3–A5, selected for the operating cycle
Lifting mechanism Electric wire-rope hoist
Girder arrangement Single girder
Supporting legs L-shaped legs for side access and load passage
Hoisting-speed options 8 or 8 / 0.8; 7 or 7 / 0.7; 3.5 or 3.5 / 0.35 m/min
Speed selection Choose one matched hoist speed package for the rated load
Crane-travel drive Three-in-one variable-frequency drive
Power supply 380 V, 50 Hz, 3-phase; site supply options
Operating controls Ground pendant / wireless remote / cabin
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Crane runway Two ground-level runway rails
Cantilever arrangement With or without cantilever
Clear passage Leg opening selected for the load and vehicle route
Hook coverage In-span lifting and agreed outside-span reach
Working motions Vertical lifting, hoist cross travel and crane long travel
Operating pattern Intermittent, repeated loading and material handling
Rail and wheel selection Matched to span, wheel reactions and foundation layout
Application focus Long loads and tasks requiring turning clearance between the legs
Travel-speed listing reference 20 m/min; travel mechanism to be confirmed in the equipment schedule
Listing working-temperature reference −20 °C to+40 °C; confirm the ordered environment package
MHH trussed single-girder electric-hoist gantry crane
MHH

MHH Truss Girder Electric Hoist Gantry Crane

Handle outdoor material transfers with an electric hoist and open truss structure.

Capacity range1–20 t
Span range10–30 m
Working classA3–A5
All specifications
Model MHH
Rated capacity range 1–20 t, with the required configuration selected together
Span range 10–30 m
Lifting-height reference 10 m; other requirements reviewed with the crane layout
Working class A3–A5
Lifting mechanism Electric wire-rope hoist
Main-girder structure Open truss welded from structural steel sections
Girder arrangement Single girder
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Crane runway Ground-level rails on both sides
Cantilever arrangement With or without cantilever
Structural selection Truss sections matched to load, span and local wind exposure
Power supply 380 V, 50 Hz, 3-phase
Operating control Ground control for the reference arrangement
Hoisting speed Specified with the selected load and electric-hoist package
Cross travel Powered electric-hoist travel along the girder
Long travel Rail travel selected for the runway length and handling cycle
Frame alternatives Fixed or travelling arrangements; bogie options by design
Working motions Vertical lifting and movement across / along the runway
Operating pattern Intermittent, repeated material and equipment handling
Transport arrangement Girder sections and assembly joints selected for delivery access
Application focus Outdoor handling where truss structure and wind exposure matter
Listing working-temperature reference −20 °C to+40 °C; confirm the ordered environment package
Listing structural-steel reference Q235B; confirm the selected material schedule

Modular and semi-gantry cranes

Select a compact modular crane or a semi-gantry arrangement that uses an elevated runway along one side of the working area.

KSMH new-design single-girder electric-hoist gantry crane
KSMH

KSMH New-Design Single Girder Gantry Crane

Position materials with a modular European-style electric-hoist package.

Listing capacity reference5–20 t; 30 t by design
Span reference10–30 m
Hoist packageEuropean-style wire-rope hoist
All specifications
Model KSMH
Rated capacity options 5 / 10 / 16 / 20 t; 30 t configuration by design
Span options 10–30 m; custom span by design
Lifting-height options 6 / 9 / 12 / 15 m; custom lift by design
Working class A5 for the reference configuration
Hoist type New-design European-style wire-rope electric hoist
Girder arrangement Single girder / full gantry
Hoisting-speed reference 7 m/min; selected for the load and working cycle
Travel-speed reference 20 m/min; final mechanism speeds in the equipment schedule
Positioning configuration Hoist and travel controls selected for pickup and set-down tasks
Power supply 380 V, 50 Hz, 3-phase; site supply options
Operating controls Pendant buttons / wireless remote, by configuration
Crane runway Two ground-level rails
Cantilever arrangement With or without cantilever
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Working motions Vertical lifting, hoist cross travel and crane long travel
Load-dependent operation Heavy-load slow / light-load fast operation with the selected package
Core-component layout Modular design with replaceable wheels and couplings
Headroom and approach Hoist envelope and upper hook position checked against the bay
Rail and foundation interface Selected wheel reactions and rail geometry define the civil interface
Operating pattern Intermittent, repeated loading and material handling
Application focus Workshop and yard tasks comparing a new-design hoist package
Current model working-class options A3–A5; A5 belongs to the separate listing reference
KSMB single-girder electric-hoist semi-gantry crane
KSMB

KSMB Single Girder Electric Hoist Semi-Gantry Crane

Serve workshop loading routes using one elevated runway and one ground rail.

Capacity range1–32 t
Span range6–35 m
Support layoutOne elevated runway / one ground rail
All specifications
Model KSMB
Rated lifting capacity 1–32 t
Span 6–35 m
Lifting height 4–20 m
Girder arrangement Single girder
Runway/support layout Semi-gantry; one elevated runway and one ground rail
Lifting mechanism Electric hoist
Hoist/trolley arrangement European-style electric hoist; suspended travel arrangement shown
Lifting attachment Hook / grab / electromagnetic chuck options
Working class A3–A5
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive / motion control Three-in-one direct-connected travel drive; variable-frequency lifting/travel
Operating controls Cabin / pendant / wireless remote / PLC linkage options
Cantilever arrangement With or without cantilever
Electrical supply 380 V / 50 Hz; 220–660 V / 50–60 Hz supply options
Electrical protection IP54 option; protected equipment scope defined in the electrical schedule
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Speed adjustment ratio 1: 10
Reducer gear tooth hardness ≥60 HRC
Site layout Overall height, leg clearance and hook approach shown in the crane drawing
Elevated support interface Vertical and horizontal reactions and rail elevations supplied for structural assessment of the building or independent support
Attachment-mode load basis Specify hook and attachment ratings separately; grab or magnet self-weight, carried material and connecting gear all form the suspended load

Grab-hook and explosion-proof gantry cranes

Match the lifting attachment and protection package to mixed cargo or the classified operating area.

MHZE single-girder electric-hoist gantry with grab and hook positions
MHZE

MHZE Grab and Hook Electric Hoist Gantry Crane

Switch between bulk-material grabs and hooks for mixed yard handling.

Handling modesGrab and hook
ChangeoverQuick-connection attachment exchange
Grab response reference3–5 s opening / closing
All specifications
Model MHZE
Lifting system Electric-hoist gantry arrangement
Handling modes Grab for bulk material; hook for general cargo
Attachment changeover Dedicated quick-connection mechanism for grab / hook exchange
Grab application Bulk material such as coal or ore; select the grab for your material
Hook application Components and general cargo handled by hook
Rope-grab arrangement Coordinated supporting and opening / closing ropes, where specified
Grab actuation Hydraulic or mechanical, selected with the grab package
Grab opening / closing 3–5 s for the matched grab configuration; confirm material and operating conditions
Hook-mode load Rate for the complete hook-lifted load, including slings and lifting attachments
Grab-mode suspended load Check grab self-weight plus the material carried and connecting equipment
Grab volume and material Select from material density, particle size and required load per cycle
Duty and cycle Define lifts per hour, shifts and load spectrum for both handling modes
Span and runway Set rail-centre span and travel length from the loading / discharge route
Usable lifting height Specify pickup level, discharge height and the selected grab's closed height
Lifting speed Quote loaded and positioning speeds for the selected attachment and duty
Trolley and crane travel Select travel speed and stopping control for the loading and discharge positions
Wheel manufacture Forging and rolling combined process
Transmission coupling Crowned gear coupling
Maintenance arrangement Modular design with replaceable core components
Operating control Operator position and grab / hook control functions selected for the work area
Power interface Site voltage, frequency and phases; separate grab power / control interface where required
BMH single-girder electric-hoist gantry crane
BMH

BMH Explosion-Proof Electric Hoist Gantry Crane

Handle materials in classified work areas with a specified explosion-protection package.

Lifting mechanismExplosion-proof electric hoist
Working classA3
Area protectionSpecified for the classified location
All specifications
Model BMH
Working class A3
Lifting mechanism Explosion-proof electric hoist
Lifting attachment Hook
Crane support and runway Two supporting leg frames running on ground rails
Working motions Hoisting, hoist cross travel and crane long travel
Cantilever arrangement With or without cantilever; specify the outside-span lifting reach
Operating control Cab, ground or remote arrangement
Operating pattern Intermittent, repeated loading and material handling
Crane-travel drive layout Vertically arranged travel gearing
Rated suspended load Select for the heaviest complete hook load, rigging and attachment
Rail-centre span Define from the two runway lines and required hook coverage
Lifting height and hook reach State pickup / set-down levels, upper hook position and approach limits
Hoisting speed Match lifting and positioning speed to the selected protected hoist
Trolley and crane speeds Specify loaded travel, approach speed and stopping needs
Site power supply Provide voltage, frequency, phases and power-feed arrangement
Hazardous-area classification State hazardous medium, zone, gas / dust group and temperature requirement
Protection package Define the hoist, travel equipment, controls and accessories for the same area
Applicable standard and documents Agree destination standard, equipment marking and model-specific protection documents
Rails and foundation interface Request final rail section, wheel reactions and foundation / outdoor load cases

Listed values describe model options. The offer confirms capacity, span, lifting height, duty and speeds together. Include the grab, magnet, lifting beam and rigging in the suspended-load requirement where applicable.

Budget planning

Single-girder gantry crane prices

Use these MH-type examples to compare the effect of capacity, span and lifting height. Each range is an equipment-supply estimate for the stated configuration; the final quotation follows your site dimensions, duty and delivery scope.

Preliminary equipment budgets — USD per crane package
Example configuration Equipment budget (USD)
5 t MH-type · 16 m span · 6 m lift · A3 USD 10,000–18,000 · One wire-rope hoist, pendant + remote, factory equipment supply.
10 t MH-type · 20 m span · 9 m lift · A3 USD 16,000–28,000 · One wire-rope hoist, pendant + remote, factory equipment supply.
20 t MH-type · 24 m span · 9 m lift · A3 USD 26,000–45,000 · One wire-rope hoist, pendant + remote, factory equipment supply.
Included in these examples One complete box-girder gantry frame, electric wire-rope hoist/trolley, powered long travel, on-crane controls and wiring, ordinary outdoor protection allowance, factory checks and packing.
Priced separately Runway rails/foundations, yard power and cable route, freight/insurance, import taxes, installation, site load testing, third-party approvals, cab, special coating and cantilevers.

Preliminary equipment estimates for the stated MH configurations, not firm quotations or installed-project totals. Capacity, geometry, duty, supply and delivery terms are confirmed in your offer.

For a written quotation, send capacity, span, required hook height, travel length, daily lifting frequency, power supply and destination.

Get a quote for your configuration
Application layout

Loading and transfer along an outdoor yard

Cover loading and transfer positions along a fixed yard runway. Select the rail span, hook reach and lifting height around vehicle access, storage positions and the load route.

Send the heaviest load, yard layout and handling frequency to compare a full-gantry, L-type or semi-gantry arrangement.

View the MH gantry crane
Orange single-girder electric-hoist gantry in an outdoor yard
MH electric-hoist gantry in an outdoor yard. Application reference.

Single-girder gantry crane buying questions

Which single-girder gantry crane suits my application?

Compare MH or KSMH for general electric-hoist handling. MDG and MHL provide L-leg clearance for long loads; MDE adds a second lifting position. KSMB suits a semi-gantry layout. Choose MHZE for grab-hook changeover or BMH when the operating area requires explosion protection.

Should I choose a box girder or a truss girder?

MH includes box and truss reference arrangements, while MHH is a dedicated electric-hoist truss family. A truss reduces exposed surface area, but the crane must still be designed for the site wind and parking conditions. Compare the complete span, capacity, wheel loads and maintenance requirements.

What do I need for a quotation?

Start with the load, crane span or working area, required lifting height and project location. A yard drawing or a photo of the existing installation is useful. Add the load dimensions for L-type clearance, the support layout for a semi-gantry, or the area classification for explosion-protected equipment.

Compare the range

Single-girder gantry crane specification comparison

Compare the complete product names and the main selection fields below. Open each product’s All specifications panel for its detailed configuration and any matched reference schedules.

Swipe across the table to compare specifications.

Model / product Arrangement Capacity Span / working width Lifting height Working class
MDG L-Type Single Girder Winch Gantry Crane Single main girder / L-leg winch 5–50 t selection range 18–35 m Project-selected Project-selected
MDE Double Trolley L-Type Single Girder Gantry Crane Single main girder / two winch trolleys 5–50 t model range; individual/shared ratings selected 18–35 m Project-selected Project-selected
MH Single Girder Electric Hoist Gantry Crane Box or truss handbook configurations Box 3–20 t; truss 5–20 t handbook references 12–30 m, by capacity 6 m or 9 m reference A3 at 3–16 t; 20 t confirm
MHL L-Type Electric Hoist Gantry Crane Single girder / L-leg electric hoist 1 / 2 / 3 / 5 / 10 / 16 / 20 t options 3–31.5 m options 6 / 9 / 12 / 18 / 24 / 30 m options A3–A5
MHH Truss Girder Electric Hoist Gantry Crane Single girder / truss electric hoist 1–20 t listing range 10–30 m listing range 10 m listing reference A3–A5
KSMH New-Design Single Girder Gantry Crane Single girder / new-design electric hoist 5 / 10 / 16 / 20 t; 30 t by design 10–30 m listing reference 6 / 9 / 12 / 15 m options A3–A5; A5 listing reference
KSMB Single Girder Electric Hoist Semi-Gantry Crane Single girder / one elevated runway 1–32 t selection range 6–35 m selection range 4–20 m selection range A3–A5
MHZE Grab and Hook Electric Hoist Gantry Crane Single girder / grab and hook modes Separate attachment-mode ratings Project-selected Project-selected Project-selected
BMH Explosion-Proof Electric Hoist Gantry Crane Single girder / protected full gantry Project-selected Project-selected Project-selected A3

Model ranges are not interchangeable combinations. Crane duty, speed, wheel reactions, cantilever reach and lifting attachments are confirmed for the ordered configuration. Separate trolley ratings do not automatically establish a combined-lift capacity.

Find the gantry crane for your working area.

Send the load, span, lifting height and project location. Include a drawing if available, and request an itemized equipment and delivery quotation.

Crane equipment, rails, civil works, freight and installation are listed with clear supply boundaries.

Request a quotation