MG series
Double Girder Hook Gantry Crane (MG)
Hook lifting for yard storage, component transfer and vehicle loading.
Lifting systemWinch and hook
RunwayGround rails, both sides
Capacity & spanSelected for the project
All specifications
| Model | MG |
|---|---|
| Crane arrangement | Double-girder hook gantry |
| Lifting attachment | Hook |
| Application focus | Outdoor material handling; warehouses, factories and loading areas |
| Rated lifting capacity | Selected for the complete suspended load, including lifting attachments and rigging |
| Span | Rail-centre span selected for the working area |
| Lifting height | Working lifting height selected for the pickup and placement levels |
| Working class | Selected from load spectrum, lifts per hour and shifts |
| Hoisting package | Mechanism, hook block and reeving identified for the selected load and lift |
| Lifting speed | Loaded lifting and positioning speeds specified with the hoisting package |
| Trolley travel | Cross-travel speed and hook approaches selected for the transfer positions |
| Crane travel | Travel speed and stopping control selected for the runway |
| Main / auxiliary hook | Hook capacities, heights and permitted operating modes specified where an auxiliary hook is required |
| Hook coverage | Leg opening, end approach and any cantilever shown on the general arrangement |
| Operator controls | Operator position and control package selected for visibility and handling |
| Runway interface | Rail section, wheel loads and horizontal reactions provided for the selected crane |
| Electrical supply | Site voltage, frequency, phases and power-feed route specified |
| Outdoor exposure | Working and parked wind conditions and corrosion exposure addressed in the equipment scope |
| Delivery arrangement | Transport sections, assembly joints and site access agreed for the destination |
| Order quantity | Enquire for one complete crane or a multi-crane project |
| Reference scope | Separate A-frame catalogue examples; not universal MG ratings. Each set is one matched configuration. Main and auxiliary hook ratings are separate. The ordered drawing and wheel-load schedule govern. |
| Reference configuration | 5 t · 22 m span |
| Rated hook load | 5 t |
| Span | 22 m |
| Main hook lifting height | 10 m |
| Auxiliary hook lifting height | Not applicable |
| Crane working class | A5 |
| Main hoisting speed | 11.3 m/min |
| Auxiliary hoisting speed | Not applicable |
| Trolley travel speed | 37.3 m/min |
| Crane travel speed | 37.3 m/min |
| Total motor power | 40.8 kW |
| Maximum wheel load | 159 kN |
| Recommended rail | P43 |
| Power supply | 380 V, 50 Hz, 3 phase |
| Reference configuration | 32/5 t · 22 m span |
| Rated hook load | 32 / 5 t (main / auxiliary) |
| Span | 22 m |
| Main hook lifting height | 10 m |
| Auxiliary hook lifting height | 10.73 m |
| Crane working class | A5 |
| Main hoisting speed | 7.5 m/min |
| Auxiliary hoisting speed | 15.4 m/min |
| Trolley travel speed | 37 m/min |
| Crane travel speed | 39.4 m/min |
| Total motor power | 99.3 kW |
| Maximum wheel load | 258 kN |
| Recommended rail | Not listed |
| Power supply | 380 V, 50 Hz, 3 phase |
| Reference configuration | 50/10 t · 30 m span |
| Rated hook load | 50 / 10 t (main / auxiliary) |
| Span | 30 m |
| Main hook lifting height | 12 m |
| Auxiliary hook lifting height | 12.918 m |
| Crane working class | A5 |
| Main hoisting speed | 5.9 m/min |
| Auxiliary hoisting speed | 10.4 m/min |
| Trolley travel speed | 36 m/min |
| Crane travel speed | 38.5 m/min |
| Total motor power | 126.5 kW |
| Maximum wheel load | 409 kN |
| Recommended rail | Not listed |
| Power supply | 380 V, 50 Hz, 3 phase |
