Single Rubber-Tired Gantry Crane
Lift and reposition lighter industrial loads across prepared yard or workshop routes without fixed rails.
Where the Single Rubber-Tired Gantry Crane fits.
Choose a compact single-girder mobile gantry when the load and cycle fit the smaller structural arrangement.
Map pickup, storage and loading positions.
Check gate, roof and service clearances.
Check ground bearing at every stop.
Specifications for the Single RTG selection.
The technical offer should state the rated load basis, complete lifting tool, operating envelope, duty and governing site reactions for your order.
| Parameter | Reference selection range | Procurement check |
|---|---|---|
| Product / arrangement | Single Rubber-Tired Gantry Crane | Confirm the exact machine and lifting device in the offered drawing. |
| Rated load for your order | Workshop or yard component | Include the attachment and rigging in the complete suspended mass. |
| Clear width / operating envelope | Set from the approved site and load drawing | Show the whole route, not only the pickup point. |
| Lifting height / under-clearance | Set from pickup, travel and placement | Include load depth, spreader or beam and safe clearance. |
| Duty / handling cycle | Select from lifts, loaded distance and shifts | State typical and maximum loads plus moves per hour. |
| Single-girder arrangement | Selected for load and span | Check deflection, hook approach and maintenance access. |
| Mobile travel | Rubber tires with project steering | Verify loaded turn and ground slope. |
| Load and duty | Project-rated | Provide complete mass and cycles. |
| Tire reactions / route | Calculated for the final selected machine | Check governing loaded, travel, braking and parked cases. |
Size the Single Rubber-Tired Gantry Crane for your site.
Send the heaviest load and its lifting points together with a dimensioned route. The quotation should state the selected machine, hook or lightweight load-specific lifting tool, site reactions and acceptance method.
Load and toolProvide the workshop or yard component, attachment mass, lifting points and centre of gravity.
CoverageMark working stations, narrowest route and turning space on a drawing.
Operating cycleState loaded moves per hour, shifts, distances and required placement accuracy.
Site interfaceProvide bearing capacity, power, climate, access and destination requirements.
Check pavement, turns and transfer roads against final tire reactions.
Buy the complete Single Rubber-Tired Gantry Crane package.
Ask each bidder to quote the same lifting arrangement, site interface, tests and dispatch milestone.
Request the GA, rated configuration, working stations, narrowest route and turning space and governing reactions.
List the hook or lightweight load-specific lifting tool, drives, braking, control and protection as included or excluded.
Set selected GA, tire loads, FAT and route acceptance, freight, site services and dispatch date in the contract.
Before you release a purchase order.
Use these questions to compare suppliers against the same technical and delivery scope.
Can a single-girder mobile crane handle every yard duty?
No. Compare the load spectrum, span, lift and travel frequency with the selected machine rating and structure.
What is the minimum order?
Ask for a quotation for one complete machine. Confirm the commercial minimum and exactly which attachments and services are included.
Which certificates and tests are included?
List the destination-specific compliance documents, factory acceptance test and site load or travel tests in the purchase specification.
How long will delivery take?
Request a dated factory dispatch commitment measured from deposit and approved drawings; show freight, erection and commissioning separately.
Send your Single Rubber-Tired Gantry Crane project brief.
Share your load and working stations, narrowest route and turning space, operating cycle, site conditions and destination. Ask for a matched GA drawing, reaction schedule, equipment list, tests and dated commercial offer.
Send your Single RTG crane enquiry ↗- Maximum load including rigging
- Span and clear width
- Lift height and working stations
- Loaded route and turns
- Pavement and operating frequency
- Destination and acceptance scope