QD 5–10 t Slow-Speed Overhead Crane
Position 5 t or 10 t loads at controlled low hoisting speed. This A3 QD reference uses low main-hoist speed for controlled placement. Compare the 5 t and 10 t columns separately, including trolley weight and runway rail.
Where 5–10 t slow-speed QD crane fits the lifting task.
This A3 QD reference uses low main-hoist speed for controlled placement. Compare the 5 t and 10 t columns separately, including trolley weight and runway rail.
Include rigging, carrier beam or service attachment, not only the payload.
Provide rail centres, travel length, hook approach and obstructions.
State frequency, shifts and precision or transfer requirements.
Specifications for the QD selection.
The figures below describe catalogue configurations. Select capacity, span, duty and mechanisms as one combination on an approved drawing.
| Parameter | Reference selection range | Procurement check |
|---|---|---|
| Rated Capacity | 5 t / 10 t | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Span | 10.5–31.5 m | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Maximum Lifting Height | 16 m | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Working Class | A3 | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| 5 t Hoisting Speed | 1.95 m/min | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| 10 t Hoisting Speed | 2.04 m/min | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| 5 t Trolley Travel Speed | 18.24 m/min | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| 10 t Trolley Travel Speed | 18 m/min | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Bridge Travel Speed | Approx. 42.3–44.9 m/min by span | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Trolley Weight | 2.4 t (5 t); 3.4 t (10 t) | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
| Recommended Rail | P38 (5 t); P43 (10 t) | Confirm the selected capacity, geometry and mechanism on the approved drawing. |
Map the load route before fixing the model.
For precision assembly and maintenance lifts, show pickup, travel and set-down locations on one drawing. Request hook envelope, reactions and the selected mechanism in the technical offer.
Complete loadInclude payload, rigging and any attachment or carrier beam.
GeometryMark rail centres, lift, approach distances, obstacles and travel length.
ServiceState loads per cycle, cycles per hour, shifts and required positioning.
Site interfaceProvide runway or foundation capacity, power and destination requirements.
Check the supporting structure against the final wheel loads and horizontal reactions.
Compare complete 5–10 t slow-speed QD crane offers.
Require the same load case, approved layout, equipment list and delivery milestone from every supplier.
Request a general arrangement, hook coverage, wheel loads and support interface.
List bridge or portal, hoist or trolley, attachment, drives, brakes, limits and overload protection.
Separate factory inspection, dispatch, freight, installation, site load test and operator documents.
Before you release a purchase order.
Use these questions to compare suppliers against the same technical and delivery scope.
Is slower hoisting enough for precise placement?
Specify both loaded speed and control behavior, including braking, creep speed and final positioning tolerance.
Can this replace a high-cycle production crane?
A3 is a light reference duty. Check load spectrum and cycles before changing duty.
What is the minimum order?
Request a quotation for one crane or a project package; the offer should state the minimum quantity and complete supply scope.
How is lead time confirmed?
Ask for calendar days from deposit and approved drawings to factory dispatch, with freight and site work shown separately.
Send the lifting layout. Get a matched 5–10 t slow-speed QD crane offer.
Share the complete load, arrangement, rail centres, lift, duty, site conditions, destination and required delivery scope. We can return a model-specific drawing, selected specifications and a dated quotation.
Send your QD crane enquiry ↗- Complete load and attachment
- Pickup, travel and set-down layout
- Span, lift and clearances
- Cycles per hour and operating shifts
- Runway or foundation information
- Destination and delivery scope