Steel Mill Straddle Carrier
Lift and transport coils, plates or fabricated steel between process, storage and dispatch zones.
Where the Steel Mill Straddle Carrier fits.
Use a mobile carrier when heavy steel must move along several yard routes without a continuous crane runway.
State coil mass, diameter, width and approved contact method.
Specify lifting tool and stack clearance.
Check access, vehicle height and repeat cycle.
Specifications for the Steel Carrier selection.
The technical offer should state the rated load basis, complete lifting tool, operating envelope, duty and governing site reactions for your order.
| Parameter | Reference selection range | Procurement check |
|---|---|---|
| Product / arrangement | Steel Mill Straddle Carrier | Confirm the exact machine and lifting device in the offered drawing. |
| Rated load for your order | Steel coil, plate or section | Include the attachment and rigging in the complete suspended mass. |
| Clear width / operating envelope | Set from the approved site and load drawing | Show the whole route, not only the pickup point. |
| Lifting height / under-clearance | Set from pickup, travel and placement | Include load depth, spreader or beam and safe clearance. |
| Duty / handling cycle | Select from lifts, loaded distance and shifts | State typical and maximum loads plus moves per hour. |
| Steel products | Coils / plates / sections | Rate each load family with its attachment. |
| Attachment | Coil tong, beam or hook by load | Include tool self-weight. |
| Material temperature | State actual range | Specify protection if warm or hot steel is handled. |
| Tire reactions / route | Calculated for the final selected machine | Check governing loaded, travel, braking and parked cases. |
Size the Steel Mill Straddle Carrier for your site.
Send the heaviest load and its lifting points together with a dimensioned route. The quotation should state the selected machine, steel-specific coil tong, spreader or hooks, site reactions and acceptance method.
Load and toolProvide the steel coil, plate or section, attachment mass, lifting points and centre of gravity.
CoverageMark yard lanes, process interfaces and loaded turns on a drawing.
Operating cycleState loaded moves per hour, shifts, distances and required placement accuracy.
Site interfaceProvide bearing capacity, power, climate, access and destination requirements.
Check pavement, turns and transfer roads against final tire reactions.
Buy the complete Steel Mill Straddle Carrier package.
Ask each bidder to quote the same lifting arrangement, site interface, tests and dispatch milestone.
Request the GA, rated configuration, yard lanes, process interfaces and loaded turns and governing reactions.
List the steel-specific coil tong, spreader or hooks, drives, braking, control and protection as included or excluded.
Set attachment drawing, tire reactions and repeated loaded-cycle acceptance, freight, site services and dispatch date in the contract.
Before you release a purchase order.
Use these questions to compare suppliers against the same technical and delivery scope.
Can a general hook lift coils safely?
The coil must be handled with an approved attachment and contact method; confirm the complete suspended mass and retention during travel.
What is the minimum order?
Ask for a quotation for one complete machine. Confirm the commercial minimum and exactly which attachments and services are included.
Which certificates and tests are included?
List the destination-specific compliance documents, factory acceptance test and site load or travel tests in the purchase specification.
How long will delivery take?
Request a dated factory dispatch commitment measured from deposit and approved drawings; show freight, erection and commissioning separately.
Send your Steel Mill Straddle Carrier project brief.
Share your load and yard lanes, process interfaces and loaded turns, operating cycle, site conditions and destination. Ask for a matched GA drawing, reaction schedule, equipment list, tests and dated commercial offer.
Send your Steel Carrier crane enquiry ↗- Coil or steel dimensions and maximum mass
- Approved gripping/contact method
- Temperature and storage arrangement
- Travel route, slopes and pavement
- Moves per shift and loaded distance
- Destination and acceptance scope