Skip to content
Henan mine crane co., ltd. Get a project quote
HENAN MINE CRANE / HAZARDOUS-AREA LIFTING

BKS Explosion-Proof Electric Wire Rope Hoist

Lift and position equipment in a classified work area with a BKS flameproof wire rope hoist. Configure the lifting unit and trolley around the complete load, hook travel, available headroom and the explosion-protection requirements of your site.

Send the required capacity, lifting height, power supply and project location. Include the hazardous-area classification or required equipment marking when available so the quotation can define the lifting unit and protected installation together.

ModelBKS
Lifting mechanismElectric wire rope
Protection designFlameproof family
Shown arrangementTrolley-mounted hoist

Your quotation pairs the lifting specification, equipment marking, drawings and agreed supply scope.

01 / BEFORE YOU ORDERA defined lifting package

Pair rated load, hook travel, speeds and duty on one technical schedule for the equipment offered.

02 / BEFORE YOU ORDERTravel where the process needs it

Add a matched trolley when the hook must move between positions along a suitable beam or crane.

03 / BEFORE YOU ORDERDocuments matched to the unit

Agree the equipment marking, protected component scope and destination documents before ordering.

BKS explosion-proof electric wire rope hoist showing the motor side, trolley running gear and lower hook
Review the hook path, trolley route and protected installation for the actual work area.
01 / APPLICATIONS

BKS hoists for classified maintenance and material handling

Start with the lifting task, then match the proposed assembly to the area classification and installation.
01

Process-equipment maintenance

Handle pumps, valves and machine components at a defined lifting point. Include the lifting beam, slings and other below-the-hook equipment in the load.
02

Transfer along a process bay

Move a load between pickup and service positions with a compatible trolley. Define the route and which drives, controls and power-feed parts enter the classified area.
03

Plant retrofits and restricted space

Compare the highest usable hook position, end approach and maintenance access with existing pipework, equipment and supporting steel.

The exact equipment marking and approval scope must match the site. Gas or vapour protection does not establish suitability for combustible dust.

02 / TECHNICAL SELECTION

BKS technical selection & specification checklist

Use one technical schedule to define the exact rated load, hook travel, speeds and protection scope being purchased.
BKS technical selection and quotation confirmation items
Product model BKS explosion-proof electric wire rope hoist
Protection design Flameproof wire rope hoist family; exact offered marking and certificate scope to match the site
Rated capacity Selected for the maximum workpiece plus below-the-hook lifting equipment
Lifting height Specified from the required highest and lowest hook positions
Lifting and travel speeds Paired with the selected capacity, operating cycle and protected drives
Mounting Trolley-mounted arrangement shown; a fixed lifting-point requirement needs a specific engineered offer
Trolley interface Beam flange or host-crane interface, wheel loads and approach dimensions checked on drawing
Duty Specified from load pattern, lifts per hour and shifts per day
Power supply Site voltage, phase and frequency stated in the offer
Controls Operator position, required motions, pendant or proposed remote interface defined in the protected scope
Area classification Applicable zone or division, substance group and site standard supplied by the project
Temperature and ambient conditions Required temperature classification and site ambient conditions matched to the offered equipment
Electrical boundary Hoist, trolley drive, controls, cable entries and power-feed interfaces identified together
Approval dimensions Headroom, hook envelope, end approach and inspection clearances
Documents Exact equipment identification, applicable approval and test records, drawing, wiring information and operating instructions

Request the selected-unit data sheet and arrangement drawing before technical approval. Dimensions, performance and protection documents belong to the exact configuration offered.

03 / CONFIGURATIONS

Choose the lifting and travel arrangement

Discuss these installation options with your enquiry. The technical offer confirms which arrangement can be supplied for your project.

Swipe to compare the installation requirements

BKS configurations to discuss
Arrangement to discuss Lifting task Mechanical checks Protected scope to define
Fixed lifting-point proposal Vertical lifting at one rated support, subject to the engineered offer Suspension, highest hook position and maintenance access Hoist, controls and connection interface at the lifting point
Beam-travelling hoist Lift and carry the load along one beam Beam section, trolley fit, travel length and end approach Hoist, trolley drive, operator controls and travel power feed
Hoist within a crane system Lifting as part of a matched overhead or gantry crane Crane rating, trolley interface, hook coverage and wheel reactions All supplied components operating within the classified boundary

The product images show a trolley-mounted BKS hoist. A fixed lifting-point proposal requires its own suspension design and written technical offer.

04 / EQUIPMENT VIEWS

Review the BKS trolley and drive layout

Use the product views alongside a dimensioned approval drawing to review the offered arrangement.
End view of the BKS wire rope hoist showing the trolley frame and protected electrical enclosures
BKS end view showing the frame, drive housings and electrical enclosures.
Three-quarter view of the BKS explosion-proof wire rope hoist showing the trolley frame, drum housing and motors
Three-quarter BKS view for reviewing the trolley and drive layout.
05 / SUPPLY SCOPE

Define what is included with your BKS hoist

Compare the complete package, from the lifting unit to the documents and installation interfaces.
01 / SUPPLY SCOPE

Selected hoist and trolley

Identify the rated load, rope length, drum and hook arrangement, trolley where required, selected speeds and duty on one equipment schedule.
02 / SUPPLY SCOPE

Controls and electrical interfaces

List the control station, motion commands, limits, emergency stop, power feed and protected electrical components included in the offer.
03 / SUPPLY SCOPE

Drawings and inspection records

Agree the dimensioned arrangement, equipment marking, relevant approval documents, inspection plan and functional test records for the unit supplied.
04 / SUPPLY SCOPE

Installation and maintenance support

Define the installation boundary, final connection, site acceptance, operating instructions, replacement components and service responsibilities.
06 / BKS HOIST PRICE

Request a configuration-specific BKS price

BKS pricing depends on the selected capacity, lifting height, mounting, duty, controls and required protection scope. Ask for the exact equipment marking and document schedule alongside the equipment price. Compare the same package in each offer: a lifting unit alone can omit the powered trolley, travel power feed, control station or destination documents. Ask for separate prices where you need optional controls, spares, packing, freight, installation or commissioning. Confirm quotation currency, validity, delivery terms and the agreed inspection scope. The final offer should identify what is included before technical approval and production. Request an itemized BKS quotation
07 / ORDERING & SERVICE

Agree the commercial terms with the technical scope

01 / ORDER QUANTITY

One lifting point or a plant package

Send a one-unit requirement or the quantity needed across the plant. The quotation confirms the accepted quantity and complete equipment package.
02 / PROTECTION DOCUMENTS

Identify the exact offered assembly

Request the model, equipment marking, document references and component schedule. Include the required destination approval in the enquiry.
03 / PRODUCTION & SHIPPING

Dates in the written offer

Agree technical approval, production, inspection and dispatch milestones, then confirm transport time and delivery responsibilities separately.
04 / WARRANTY & SPARES

A defined after-sales scope

Set the warranty period, exclusions, service route and spare-parts identification in writing. Include installation and periodic-inspection responsibilities.
09 / BUYER QUESTIONS

BKS explosion-proof hoist purchasing FAQs

Answers for matching the hoist, installation and quotation to your project.
What is a BKS explosion-proof wire rope hoist?

BKS is a flameproof electric wire rope hoist family for selection around a classified lifting application. It uses a wire rope lifting mechanism; the exact capacity, mounting, speeds and explosion-protection scope belong to the unit offered.

Which area classification and certificate do I need?

Use the plant's area assessment and destination requirements. Provide the zone or division, substance group, temperature requirement and ambient conditions, then match them to the exact equipment marking and documents. Suitability is established for the offered assembly and installation.

Are ATEX or IECEx documents included?

State the approval required for your destination before ordering. Ask the offer to identify the applicable documents and exact model coverage, including the trolley and controls where supplied. The BKS model name alone does not establish ATEX or IECEx certification. Request the exact offered equipment documents and scope.

Can a gas-area hoist also work around combustible dust?

Gas or vapour protection does not automatically establish suitability for combustible dust. Identify the substance and the site's classification. Request a separate technical assessment and an explicitly matched equipment and document scope before selecting a dust-area configuration.

How do I choose capacity and lifting height?

Include the workpiece and all below-the-hook attachments in the load. Measure the required highest and lowest hook positions and describe the operating cycle. The supporting structure review also includes hoist and trolley self-weight and applicable operating loads.

Can the hoist run on my existing beam?

Send the beam section, flange dimensions or crane trolley drawing, plus the route length and required end approach. The selected trolley must fit the actual track, and the existing structure must carry the installation loads.

Are the trolley, pendant and remote controls included?

Their inclusion depends on the quoted package. Define lifting and travel motions and the operator's position, then require the offer to identify each supplied drive, control and electrical interface within the classified area.

What should I send for a BKS quotation?

Start with complete load or required rated capacity, lifting height, quantity, power supply and destination. Add the area classification or required marking, mounting details and expected duty. A beam photo or plant sketch is useful when a full drawing is not yet available.

Can I replace an existing explosion-proof hoist?

Send the old nameplate, certificate references if available, installation dimensions and current site classification. Check the replacement hoist, controls, travel interface and supporting structure together; a matching tonnage alone does not establish compatibility.

HENAN MINE CRANE / TECHNICAL QUOTATION

Get a BKS explosion-proof hoist quotation

Send the complete load, hook travel, quantity, site power and destination. Add the plant classification or required equipment marking so the offer can cover the right hoist, trolley and protected electrical scope. Send your BKS requirements
↑
BKS Explosion-Proof HoistProject quotation
Get a quotation
 
BKS product image gallery
Enlarged BKS product image