Skip to content
Henan mine crane co., ltd. Get a project quote
MZ / Dedicated bulk-material grab

MZ Double-Girder Grab Gantry Crane

MZ combines a double-girder gantry and selected grab for repeated bulk-material pickup, transfer and discharge. Choose the grab using material density and behavior, including its self-weight in suspended load. Match the lifting route, discharge clearance, duty and control functions to the required handling cycle.

Handling
Dedicated bulk-material grab
Structure
Double-girder full gantry
Load basis
Grab, material and connecting equipment
Double-girder grab gantry crane handling bulk material beside rail wagons
Grab gantry at a bulk-material yard — photograph.Equipment application photograph
01 / APPLICATIONS

Where the MZ
fits the work.

01

Receiving and stockyard transfer

Move suitable loose material between receiving positions and storage areas. Describe the material condition and storage profile so the grab can be selected for pickup across the working area.

02

Hopper and vehicle loading

Lift and discharge material into a defined receiving opening or vehicle position. Check the closed-grab height, opening envelope and required clearance above the receiver.

03

Repeated process supply

Supply material to a production or transfer point through a repeated route. The handling rate depends on pickup, lift, travel, discharge and return, together with the load carried.

02 / TECHNICAL SPECIFICATIONS

MZ specifications
and equipment configuration.

Compare the lifting mechanism, control functions and site interfaces for the selected crane.

MZ technical specifications and configuration
ModelMZRated-load reference20 t; check the complete suspended load with the selected grab
Crane structureDouble-girder gantry framePrimary attachmentGrab
Handling taskDedicated bulk-material loading and unloadingRunway arrangementLegs on both sides; ground-level rail travel
Working motionsGrab lifting, trolley cross travel and crane long travelStructural designMain and end-girder stress distribution optimised by finite-element analysis
Rated suspended loadGrab self-weight plus material load and connecting equipmentSpan options, reference package18–35 m; select the matched load/span arrangement
Maximum lift, reference package10 m; confirm the grab working levelsGrab volumeSelected from material density and the required load per cycle
Material propertiesSpecify density, particle size and flow characteristicsBulk density, reference grab< 1.5 t/m³ for the stated grab package
Grab actuationHydraulic or mechanical opening / closing selected with the grabGrab cycleOpening / closing speed and full handling cycle confirmed for the material and grab
Duty options, reference packageA6–A8; selected for the required load spectrumAutomation controlManual and automated operating functions specified in the control package
Authorised accessFingerprint-based operator access available by configurationCamera systemMultiple camera views and operator display available by configuration
Lifting and travel speedsMotion speeds selected for pickup, transfer and controlled dischargeElectrical supplyCrane and grab power / control interfaces specified for the site

The 20 t reference package is selected with its span, duty and grab. Confirm the complete suspended load including the grab; the stated rating is not an automatic net-material payload.

03 / EQUIPMENT VIEWS

See the MZ arrangement.

Review the original equipment views alongside the selected crane drawing.

MZ complete gantry arrangement, view 1
MZ gantry arrangement — manufacturer rendering, view 1.
MZ complete gantry arrangement, view 2
MZ gantry arrangement — manufacturer rendering, view 2.
Double-girder grab gantry crane handling bulk material beside rail wagons
Grab gantry at a bulk-material yard — photograph.
04 / CONFIGURATION

Choose the MZ equipment and site interfaces.

01 / OPTION

Material and complete mass

Provide bulk density, particle size and flow or adhesion characteristics. Select grab geometry, volume and hydraulic or mechanical actuation. Include grab, material and connecting equipment in suspended load; the 20 t reference does not mean 20 t net material in addition to the grab.

02 / OPTION

Pickup, discharge and duty

Keep the reference span, lift, duty and density conditions together. Show pickup depth or stockpile level, closed-grab height, discharge position and return route. State lifts per hour, shifts, load spectrum and intended net material per cycle.

03 / OPTION

Operating and visibility functions

Agree manual or automated portions of the handling sequence and operator intervention. Fingerprint-based access, camera positions and operator display can be specified; define the pickup, transfer and discharge areas that must be observed.

04 / OPTION

Electrical and service scope

Define any separate grab supply, control cabling and crane power feed. Coordinate runway reactions, weather exposure, mechanism and attachment access, inspection and replacement parts. Select speeds and control sequence for the actual loaded route.

05 / PURCHASING & DELIVERY

Confirm the complete MZ supply scope.

ORDER

Order quantity

Enquire for one complete crane and matched grab. Send material details, required load, span, lifting height and destination; estimates are enough for an initial discussion.

QUOTATION

Equipment and quotation scope

Compare grab self-weight, intended material load, crane mechanisms, controls, power interfaces and delivery scope. Identify rails, power feed, freight and installation services where included.

DOCUMENTS

Drawings and equipment documents

Agree crane and grab drawings, technical schedules, electrical information, operating instructions and the load basis for the selected material and attachment.

ACCEPTANCE

Standards and acceptance

Define the factory inspection, functional checks and load testing included. State destination standards, document requirements and any material-handling demonstration or third-party inspection to be agreed.

DELIVERY

Delivery and installation

Confirm manufacturing and delivery timing after the grab and crane package is selected. Allocate assembly, attachment installation, control setup and commissioning responsibilities.

SUPPORT

Warranty and spare parts

Include operator instruction on grab functions and the agreed cycle. Record warranty terms, service access and the spare-parts scope for both crane and attachment.

CONTINUE YOUR COMPARISON

Compare related
gantry arrangements.

All 16 double-girder gantry models ↗
07 / QUESTIONS BEFORE ORDERING

Choose the MZ
with the job in view.

Compare the handling task, selected lifting equipment and supply scope before ordering.

Does the 20 t reference mean 20 t of material?

No net material payload is established by that reference alone. Treat the capacity as the complete suspended load, including grab self-weight, material and connecting equipment. Confirm the intended net material load in the selected offer.

Can I choose any span within the displayed reference range?

The reference span and duty options still require one selected crane configuration. Capacity, lift, grab package and working class are confirmed together; the range is not a guarantee of every possible combination.

Does the density condition apply to every MZ grab?

The stated below-1.5 t/m³ condition belongs to the displayed reference grab package. Supply your actual material density and other properties so a suitable grab and complete suspended load can be selected.

How is grab volume selected?

Volume depends on material density, grab self-weight and the intended carried load, as well as pickup behaviour. Provide particle size and relevant flow characteristics. Crane rated load alone does not determine a suitable volume.

Is grab opening time the same as production output?

The full cycle also includes pickup, lifting, travel, discharge and return. Describe that route and the expected material per cycle when discussing handling rate and duty; a single opening-time figure cannot define complete output.

Can MZ operate automatically?

Manual and automated functions can be specified in the control package. Identify the required sequence, operator role and site interfaces. The quotation should list the included functions and acceptance checks.

What clearance is needed above a hopper?

Compare the grab closed height, suspended connections, required opening envelope and discharge level. Provide the hopper or receiving dimensions so the useful hook travel and clearances can be shown on the arrangement.

What is needed for the first quotation?

Start with the material, estimated load, span, lifting height and destination. If the material load or dimensions are unknown, describe the task and desired transfer route. The grab selection can then be developed with the crane proposal.

08 / YOUR MZ GANTRY PROJECT

Get a quotation
for your MZ crane.

Tell us what you lift, the approximate span, the required lifting height and your destination. If a dimension is unknown, describe the task and leave that field open.

  • An arrangement matched to the lifting task
  • A clear equipment and service scope
  • Delivery and support terms in the offer

info@cranehenanmine.com

PRODUCT SELECTEDMZ Double-Girder Grab Gantry Crane

Not sure about a dimension? Leave it blank. A site sketch is helpful when available.

MZ gantry craneDiscuss your lifting task
Request a quote ↗
MZ equipment gallery
Enlarged MZ crane image

↑