Skip to content
Henan mine crane co., ltd. Get a project quote
YB / METALLURGICAL & PROCESS LIFTING

YB Slab Handling Overhead Crane

Move steel slabs from caster output through stacking and in-bay loading with a clamp matched to your product range. YB brings the slab attachment, metallurgical bridge and motion controls into one handling system. Slab dimensions and access define the gripping envelope; slab mass, temperature and moves per hour determine the crane rating, heat protection and operating duty.

Handling method
Purpose-matched slab clamp
Product range
Hot or ambient-temperature slabs
Clamp selection
Full slab and gripping envelope
Operating controls
PLC, HMI and master controller
Process-matched liftingDefined load & duty

Start with the information you already have. A load drawing and workshop sketch help us recommend a configuration.

01
Match one attachment to the specified slab range

Define the smallest and largest slabs, permitted contact surfaces and stack access. The offer states clamp opening, gripping geometry and the product envelope that the attachment can handle.

02
Plan the complete storage movement

Select hook coverage and travel around caster pickup, storage lanes and discharge positions. Stack height and moves per hour connect the crane arrangement to the production requirement.

03
Select protection around actual hot-slab exposure

Assess slab surface temperature, workshop air temperature and radiation reaching the crane separately. Use those conditions to specify clamp materials, bridge shielding and protected equipment.

YB overhead crane and red slab tong above stored slabs
YB overhead crane and red slab tong above stored slabs
01 / APPLICATIONS

Link slab pickup, storage and the next production step.

01

Continuous-caster output

Pick up suitable slabs at the caster discharge position and move them to cooling or storage. Provide the product range, presentation of the slab, surface temperature and required pickup interval so the clamp and cycle can be reviewed together.

02

Slab-store stacking and retrieval

Build and retrieve the planned stacks with an attachment that can reach the permitted gripping surfaces. Check lane spacing, maximum stack height and access for the smallest slab as well as the heaviest slab.

03

In-bay loading and production transfer

Move slabs to the next handling position or loading station within the crane bay. Define discharge geometry, product mix and peak moves per hour so coverage, speeds and controls serve the intended workflow.

Slab temperature, crane ambient temperature and radiant heat are separate conditions. Required clamp opening and gripping range come from the smallest and largest slabs.

02 / TECHNICAL SPECIFICATIONS

YB specifications and configuration options

Compare the available options for your lifting task. Capacity, span, lift height and speed are matched in the selected configuration.

ModelYB
Crane typeMetallurgical overhead crane for slab handling
Product handledHigh-temperature or ambient-temperature steel slabs
Lifting attachmentSlab clamp matched to product dimensions and gripping conditions
Rated capacitySelected from maximum slab load plus clamp and suspended equipment
Clamp openingMatched to minimum and maximum slab gripping dimensions
Gripping arrangementMatched to geometry, permitted contact surfaces and stack access
SpanMatched to production-bay rail-centre distance
Lifting heightMatched to pickup/discharge levels and maximum stack height
Working dutySelected from slab mass distribution, moves per hour and shifts
Hoisting speedSelected for pickup, transfer and controlled stacking
Trolley and bridge travelSelected for storage lanes, route length and production cycle
Operating controlPLC module, HMI touch screen and WLK master controller
Master-controller functionsDefined detents, zero-position return and locking
Thermal protectionHeat protection for main girders, end beams and specified components
WheelsForging and rolling composite manufacturing process
Slab temperatureSpecified separately from workshop ambient temperature
Power supplyThree-phase voltage and frequency matched to destination supply

Compare model configurations

Operating requirementSlab informationAttachment and motion selectionProtection/control scope
Hot caster-output transferMass, surface temperature and pickup positionClamp gripping range and transfer cycleRadiant-heat shielding and protected equipment
Cold slab storageMinimum/maximum dimensions and stack patternClamp opening, stack access and placement speedOperator controls; weighing/position functions where ordered
Mixed slab sizesComplete size range and permitted gripping surfacesAdjustable clamp range within the defined envelopeSelected sensing and attachment controls
Loading or process supplyDispatch position, moves/hour and travel distanceComplete suspended-load rating and motion speedsProcess interface and handling interlocks where ordered

The offer gives a definite clamp opening, slab envelope, crane rating and motion package. Different slab temperatures and gripping geometries require their own configuration.

03 / EQUIPMENT VIEWS

See the slab clamp and metallurgical bridge arrangement.

Compare how the slab attachment is supported and positioned beneath the bridge. The offer states clamp opening, gripping envelope and complete suspended-load rating.

YB lifting trolley and slab-tong suspension
YB lifting trolley and slab-tong suspension
YB bridge underside and suspended slab tong
YB bridge underside and suspended slab tong
04 / CONFIGURATION

Configure YB around your production task.

Use the full slab range to select the clamp, then match the crane to the complete suspended load and storage cycle. The quoted schedule gives a definite gripping envelope, net slab payload and crane rating.

YB slab-handling bridge with suspended mechanical tong
YB slab-handling bridge with suspended mechanical tong
01 / SELECTION

Slab and gripping envelope

List minimum and maximum length, width and thickness, plus shape variation and permitted contact surfaces. Identify the clearance available for jaws to engage and release at each pickup position.

02 / SELECTION

Clamp and complete suspended load

Include clamp self-weight and all suspended equipment with the maximum slab load. If grouped slabs are required, define the group geometry and permitted gripping arrangement for review.

03 / SELECTION

Stack layout and hook coverage

Show caster output, storage lanes, stack heights and discharge positions. Select span, hook travel and approaches so the attachment can reach and clear the required slab positions.

04 / SELECTION

Temperature and exposure

Give slab surface temperature, air temperature, time above hot stacks and radiant exposure separately. Match clamp components, main-girder and end-beam protection, cables and drives to those conditions.

05 / SELECTION

Throughput and operator controls

State typical and peak moves per hour, slab-mass distribution and operating shifts. Match speeds to controlled pickup and stacking, with PLC, HMI and master-controller functions identified in the offer.

06 / SELECTION

Weighing and production interfaces

Specify any required load indication, storage-position feedback or data exchange with plant systems. Agree signal boundaries, required performance and acceptance checks with the equipment schedule.

05 / PURCHASING & HANDOVER

Define the equipment,
documents and delivery scope.

Compare the bridge, lifting mechanism, slab clamp, clamp controls, heat protection, operator station and power feed as one system. Request the gripping-envelope drawing, net payload and complete-load ratings, with clamp-function trials, installation support, operator training and recommended clamp, rope, brake and control spares itemised.

Define the complete equipment package

Identify the bridge, lifting mechanisms, lifting attachment, heat protection, controls and power feed. State the selected operating modes and equipment boundaries in the offer.

Agree the drawings and acceptance evidence

Request the arrangement, lifting-interface drawing, load-and-motion schedule, electrical information, safety-function description and agreed factory/site checks for the ordered crane.

Make the price boundaries clear

List rails, runway steelwork, attachments, automation, weighing, spares, packing, freight, erection and commissioning as included, optional or excluded.

Coordinate delivery with the plant

Agree drawing approval, manufacturing, testing and dispatch milestones for the selected configuration. Include access, shutdown windows and the destination in the delivery plan.

Plan installation and process trials

Define erection supervision, power and runway preparation, protection checks, attachment fit, trial operation and operator training, with responsibilities agreed before site work.

Specify warranty, service and spare parts

Record the warranty terms and commencement, service arrangements and recommended brake, rope, drive, control and attachment spares for the equipment supplied.

01Technical alignment

Agree load, lifting device, route, duty, thermal conditions and operating modes.

02Approved arrangement

Coordinate hook coverage, attachment fit, runway reactions and site responsibilities.

03Factory checks & dispatch

Complete the agreed checks and records, then coordinate packing and shipment.

04Site handover

Confirm erection, commissioning, operator training and service arrangements.

DOCUMENTS TO AGREE

Technical schedule · General arrangement · Attachment interface · Runway loads · Electrical information · Safety-function description · Agreed inspection records · Operation and maintenance manuals

07 / PROCUREMENT QUESTIONS

Before you order
your YB crane.

Review the lifting task, configuration and quotation scope. We can help develop a crane proposal from the project information available.

What makes YB suitable for slab handling?

YB combines a metallurgical overhead crane with a slab-clamping attachment selected for the product geometry and process. The clamp, complete load rating, working coverage, thermal protection and motion duty are specified together for slab transfer, stacking and loading.

Which dimensions define the clamp opening?

Provide the minimum and maximum slab length, width and thickness, with mass, shape variation and permitted gripping surfaces. Add the space available around slabs in the actual stack. The offer then defines the opening, jaw arrangement and usable gripping envelope.

Why do you need the smallest slab as well as the heaviest one?

The heaviest slab helps establish load rating, while the smallest slab can determine whether the jaws reach and engage correctly. The complete product range and stack access are needed to select an attachment that serves the intended slab mix.

Does the crane rating include the clamp?

Yes. Selection includes the slab, clamp and every other suspended component. Ask for net slab payload and complete crane load to be stated separately so the offered equipment can be compared on the same basis.

Can YB lift hot and cold slabs with the same arrangement?

Both duties can be considered. Provide the full temperature range and exposure conditions for the proposed product mix. The ordered clamp and thermal package must cover those conditions, with any operating restrictions stated in the equipment schedule.

Is slab surface temperature the same as crane ambient temperature?

They are separate selection conditions. Slab surface temperature describes the product; ambient temperature describes the surrounding air. Distance, exposure time and radiation determine the heat reaching the attachment and crane equipment. Provide each condition where known.

Can several slabs be moved in one lift?

A grouped-slab duty can be reviewed using the proposed group dimensions, total mass, gripping access and attachment arrangement. The permitted group and handling method must be included in the order; a single-slab rating does not by itself define a grouped-slab lift.

Can the crane provide weighing or storage-position information?

Weighing, position feedback and production-system interfaces can be specified. Describe the required information, display positions, data connection and accuracy or repeatability needed so the proposal can identify the supplied functions and acceptance checks.

How do we verify the clamp before production use?

Agree representative slab dimensions, permitted loads, gripping and release checks and the factory and site trial scope. The attachment drawing and operating instructions should identify the product envelope, gripping conditions and inspection requirements for the supplied clamp.

What affects the YB budget and project schedule?

The slab range, clamp, maximum load, temperature, span, stack height, duty and controls define the package. Compare the bridge and attachment scope alongside tests, documents, packing, freight, erection, commissioning, warranty terms and spare parts. Request dates against drawing approval, factory testing and dispatch milestones.

GET A CONFIGURED QUOTATION

Request your YB
technical proposal.

Send the smallest and largest slab dimensions, maximum slab mass and temperature. Add your span, stack height and storage layout so we can develop a YB clamp-and-crane proposal around the slabs you actually handle.

  • Crane and lifting device matched to the load
  • Clear configuration and supply boundaries
  • Drawing, testing and site-support scope

info@cranehenanmine.com

PRODUCT SELECTEDYB Slab Handling Overhead Crane

A slab schedule, stack photograph or simple layout is enough to begin. Include required moves per hour, operating shifts, plant power and project destination when known.

↑
YB Metallurgical CraneRequest your project quotation
Get a quotation ↗
YB equipment gallery
Enlarged product image