Anode dimensions and stack pattern
Aluminum Smelter Process Crane System
An aluminum smelter needs different handling actions at the carbon warehouse, feeding station and electrolytic cell; one hook crane cannot perform all three.

Start with the load and the process route.
An aluminum smelter needs different handling actions at the carbon warehouse, feeding station and electrolytic cell; one hook crane cannot perform all three.
The load, lifting attachment, building interface and operating sequence need to be reviewed together.
Prepare the technical brief ↗Cell and furnace layout
Feeding and residue sequence
Automation and personnel-access rules
Connect carbon-block storage, material feeding and anode replacement.
Plan dedicated equipment by process station. Adjustable clamps lift anode blocks, a suction and distribution crane serves material feeding, and a multi-function unit handles crust breaking, anode exchange and residue tasks.

Prepare carbon blocks
Grip and stack blocks to match the warehouse pattern.
Feed the process
Combine material pickup, suction and distribution where the process requires them.
Service the cell
Coordinate anode change and residue removal at each electrolytic position.
Tooling flexibility
Set clamp opening and block count from actual anode sizes.
Hot-zone automation
Define cell access, sensing and personnel exclusion before specifying automatic operation.
Baotou aluminum project
The project used a customized package for a Baotou aluminum producer including a multifunctional suction crane, anode-block stacking crane and electrolytic-aluminum process unit.






Define the operating brief before fixing a crane model.
Project figures above describe a delivered application. Your crane rating, dimensions, controls and documentation follow the approved site brief.
| Input | Information needed for this application | Confirm in the technical offer |
|---|---|---|
| 01 / Site requirement | Anode dimensions and stack pattern | Rated load including the attachment, lifting-point arrangement and load cases. |
| 02 / Site requirement | Cell and furnace layout | Crane span, lifting height, headroom, wheel loads and runway or foundation interfaces. |
| 03 / Site requirement | Feeding and residue sequence | Duty classification, speeds and control behaviour matched to the agreed operating cycle. |
| 04 / Site requirement | Automation and personnel-access rules | Protection, positioning, interlocks, monitoring and safe recovery requirements. |
| Destination and delivery | Country, project standards, quantity, freight and site services. | Documents, inspection and testing, packing, installation support and agreed delivery milestones. |
Send the available load schedule and drawings. The missing inputs can be identified during technical review.
Discuss your project ↗Compare the complete lifting package.
The offer should state the equipment boundary, documents, inspections and site responsibilities for your destination.
Engineering
General arrangement, load basis, runway and utility interfaces, control and protection schedule.
Manufacture & inspection
Approved drawings, inspection plan and factory testing for the selected configuration.
Shipping & site work
Packing, freight, erection support, commissioning and operator training as specified.
Handover
Test records, manuals, maintenance instructions and agreed spare-parts list.
Single-crane and multi-crane packages are available. Your quotation defines the destination standards, required certificates and inspection records, packing, site services and production schedule after drawing approval.
Compare equipment for this operating task.
These product families and related applications provide a starting point. Final selection follows the load and site review.
Before you request a quotation.
What information is needed to specify this crane solution?
Send the full load and lifting-gear mass, route or bay drawing, operating cycles, working environment, controls and destination requirements.
Can the crane system be configured for our site and process?
Yes. The equipment arrangement, attachment and controls are selected for the approved load, route, runway and process conditions.
What are the order quantity, certification and lead time?
We can quote a single crane or a coordinated fleet. The project offer states the agreed destination standards, inspection and test documents, manufacturing schedule after drawing approval, and shipping or site-service scope.
Send your project brief. Get a crane proposal built around your process.
Share your load, layout, work cycle and destination. Our team can review the crane, lifting attachment and delivery scope together.
Send your project requirements ↗























