HENAN MINE CRANE / U-TYPE GANTRY CRANES

U-Type Subway Turn-Slag Hook Gantry Crane

Name: U-Type Subway Turn-Slag Hook Gantry Crane
Brand: Henan Mine Crane

A specialized U-type gantry crane for subway construction and slag handling.

A specialized U-type gantry crane for subway construction and slag handling. The model configuration publishes a 75 t M6 configuration with deep below-rail lifting, high-speed/low-speed hoisting and dedicated travel parameters for heavy construction duty.

Review specifications ↓Request a proposal ↗

U-TypeModel designation75 tRated load selection

U-Type Subway Turn-Slag Hook Gantry Crane

PRODUCT CONFIGURATION / U-Type

THE LIFTING TASK

Designed for your handling path.

Confirm maximum suspended load, rail centers, travel length, cantilever, foundation reactions and outdoor wind conditions.

01 / APPLICATION

Where it fits

02 / EQUIPMENT

Crane arrangement

U-Type Gantry Cranes.

MODEL U-Type

Technical configuration

Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.

Crane FamilyU Type Subway Turn-Slag Hook Gantry Crane

Rated Capacity75 t

Working ClassM6 in the configuration

Hoisting Speed1 / 10 m/min

Maximum Lifting HeightApprox. +10 m above rail / 16.5 m below rail

Trolley Gauge9,000 mm

Crane Gauge / Span Reference30,000 mm

Trolley Travel Speed2 / 20 m/min

Crane Travel Speed3 / 30 m/min

Trolley RailP43

Crane Rail50 kg/m

Maximum Wheel Pressure285 kN trolley-side reference / 248 kN crane-side reference in the configuration

Main Hoist MotorYZP400L1-10, 160 kW, 585 r/min configuration reference

Power Supply3-phase AC 380 V / 50 Hz

BUYER'S SELECTION GUIDE

Specify the crane around the job.

Compare the U-Type Gantry Cranes range ↗

Load and lifting attachment

Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.

Rails and working envelope

Confirm rail gauge, runway length, foundation capacity, cantilever and end approaches.

Duty and controls

State typical load, lifts per hour, travel distance, shifts, control position and site power supply.

Model-specific check