Fabricated beams & frames
Move long steelwork between fabrication, inspection and dispatch positions while supporting the component at its designated lifting points.
Bridge cranes for workshops and production lines.
Explore Overhead Cranes
Ground-supported lifting for yards and construction.
Explore Gantry Cranes
Wire rope and chain hoists for lifting points and cranes.
Explore Electric Hoists

Wire rope lifting and pulling with a powered drum.
Explore Electric Winches
Grab buckets, magnets and hooks for your load.
Explore Lifting Attachments & Grabs
Mobile handling for containers, precast and yard loads.
Explore Rubber-Tired Gantry Cranes & Straddle Carriers

Lift and move vessels through boatyards and marinas.
Explore Marine Travel Lifts
Ladle, slab, scrap and coil handling across steel production.

Container stacking and cargo transfers across terminals and rail.

Turbine installation, powerhouse maintenance and wind equipment assembly.

Controlled component transfer and positioning for precision assembly.

Heavy fabrication, production lifting and factory crane automation.

Process lifting for smelters, carbon blocks and anode materials.

Clean lifting and classified protection for sensitive process areas.

Bridge fabrication, metro construction and ship block assembly.

Automated storage and retrieval for plates, cables and bins.

Follow project dispatches, crane engineering and factory acceptance.

Dispatch, installation and equipment in service

Crane configurations and handling technology

Factory inspections, acceptance and test programmes

Company developments, people and community programmes
Handle long frames, machinery and fabricated components with two compact new-design electric-hoist trolleys on one bridge. KSSLE combines dual-speed lifting with variable-frequency trolley and bridge travel for controlled transfer and placement. Select independent operation, a coordinated two-point lift or a planned turning function for the workpiece.
Tell us the workpiece weight, length and lifting task. We can help select the two hoists, their spacing and the operating functions you need.

Start with the dimensions you already know. A workshop photo or sketch can help us recommend a configuration.
Position each trolley at the component's lifting points. Individual hoist ratings and the combined bridge load are matched to the actual load distribution.
Dual-speed lifting gives a slower vertical approach for placement. VFD travel provides adjustable horizontal movement between workstations.
The C-shaped hoist arrangement and large-diameter rope drums keep the two lifting units compact. Optional condition monitoring can be included for maintenance planning.

Move long steelwork between fabrication, inspection and dispatch positions while supporting the component at its designated lifting points.
Support machine bases and large assemblies during transfer and placement. Specify the permitted tilt or relative hook movement for the assembly process.
A matched attachment and coordinated control sequence can support balanced turning of suitable components. The turning load cases and hook movements form part of the ordered configuration.
Each hook has its own rating. The technical offer also defines the combined load, working hook spacing and permitted paired operations.
Compare the available options for your lifting task. Capacity, span, lift height and speed are matched in the selected configuration.
| Model | KSSLE |
|---|---|
| Bridge arrangement | Double girder overhead bridge |
| Trolley quantity | 2 on a common trolley track |
| Lifting mechanism | Two compact new-type electric wire-rope hoists |
| Rated capacity | Individual trolley ratings and combined load selected for the lifting cases |
| Span | Matched to runway rail-centre distance |
| Lifting height | Matched to pickup and placement levels |
| Hook spacing | Minimum and maximum working spacing selected for the component |
| Crane duty | Matched to load spectrum, handling frequency and operating shifts |
| Hoisting | Dual-speed lifting; speed pair selected for each hoist |
| Trolley & bridge travel | Variable-frequency drives |
| Operating modes | Independent or coordinated handling; balanced turning when specified |
| Hoist layout | Compact C-shaped arrangement with large-diameter rope drums |
| Operator control | Control station and operating functions matched to the application |
| Monitoring option | Remote condition monitoring and maintenance functions |
| Power supply | Three-phase voltage and frequency matched to the destination supply |
| Handling task | Load rating | Operating functions | Selection information |
|---|---|---|---|
| Separate workshop lifts | Maximum load at each trolley | Individual hoist and trolley selection | Load mix and pickup positions |
| One long load on two hooks | Individual reactions and combined bridge load | Coordinated lift with specified relative movement | Component weight, centre of gravity and hook spacing |
| Balanced turning | Load cases throughout the turning sequence | Matched hoist movement, attachment and interlocks | Component geometry, lifting points and permitted tilt |
These are selectable operating arrangements. Capacity, speed, hook spacing and coordination limits are defined for the ordered component-handling task.
The product views show two new-type electric-hoist trolleys on one double girder bridge. Compare the trolley layout and lifting positions with the component length and assembly task.


Start with the component weight, lifting-point spacing and highest placement level. Select the hoist and control package around those tasks.

State the maximum load at each lifting point, including attachments, and the maximum combined load. The two trolley ratings are selected from these conditions.
Specify the shortest and longest lifting-point spacing and the required hook travel. Both trolleys share the same track; the working range and separation are shown in the arrangement drawing.
Choose separate lifting tasks, coordinated handling of one component, or an agreed turning sequence. Paired speed and relative hook movement are specified for the selected operation.
Dual-speed electric hoists and VFD travel form the lifting platform. Match working duty, site voltage, operator controls and any remote monitoring to the destination workshop.
Compare the equipment, documentation, delivery and service scope for the configuration you need.
Request one complete KSSLE crane or a project batch; the offer identifies the two trolley ratings and quantity.
List the bridge, both hoist trolleys, control and feedback package, operator station, power feed, attachments, monitoring, freight, installation and spares as named items.
Specify the crane arrangement, individual and combined ratings, working hook-spacing limits, operating modes, electrical drawings, test records, manuals and destination compliance requirements.
Production and dispatch are scheduled after the lifting cases, dimensions and coordinated-control functions are agreed. Drawing approval, factory testing, transport and site work are identified as separate milestones.
Agree bridge assembly, trolley alignment, electrical connection and commissioning of the ordered independent, paired or turning functions. Identify site access, local lifting equipment and test-load responsibilities.
The purchase order defines warranty duration, commencement, covered hoists, drives and controls, exclusions and the after-sales support contact. Include the recommended wear and control-system spares.
Find the arrangement, equipment options and order information that suit your application.
Two independently positioned hoist trolleys can support a long frame, beam or machine at separated lifting points. KSSLE adds compact new-type hoists, dual-speed lifting and VFD travel for transfer and controlled placement.
Yes, independent trolley operation is an available arrangement. Each trolley remains within its own load and travel limits, and the order identifies the permitted combined load on the bridge when both trolleys are used.
The individual trolley ratings and the permitted combined load are stated separately. For one shared component, the load at each hook is calculated from its weight, centre of gravity, lifting points and attachment rather than assuming an equal split.
Balanced turning can be specified for a suitable workpiece. Send the component geometry, lifting-point arrangement and intended turning sequence so the hoists, attachment, load cases and controls can be selected together.
The coordination requirement is agreed for the lifting task. Specify the acceptable hook-height difference or component tilt and the required lifting speed; the offer defines the supplied feedback, control functions and acceptance criteria.
The standard arrangement has two trolleys sharing one track. Their order, travel limits and minimum separation should be planned around the load positions. A requirement for trolley crossing needs a separately reviewed arrangement.
KSSL is a single-trolley new-design electric-hoist crane. KSSLE adds a second new-design hoist trolley for separated lifting points, with dual-speed lifting and variable-frequency travel. LHE is a twin wire-rope-hoist alternative with its own selected motion and coordinated-control package. Choose by the load, placement task and operating cycle.
Send the workpiece weight and length, approximate span, required lifting height and destination. Tell us if the hooks lift separately, support one component or take part in a turning operation. A photograph or drawing helps us develop the individual ratings, working spacing and control package; one crane or a project batch can be quoted.
The quotation confirms the production schedule, destination compliance documents, factory testing, warranty terms and service scope for the selected crane. State whether freight, installation, commissioning, operator training, remote monitoring and spares are required.
Share the workpiece weight and length, approximate span, lifting height and destination. Describe separate lifting, a shared lift or a turning task, and include a photograph or drawing if available. We can help develop the lifting points and control scope.
info@cranehenanmine.com