Where it fits
Bulk material transfer
HENAN MINE CRANE / GRAB OVERHEAD CRANES
Single-Girder Grab Crane
A grab-equipped single-girder crane using two electric hoists with a four-rope grab for loose-material handling.
LDZModel designation1–10 tRated load selection
PRODUCT CONFIGURATION / LDZTHE LIFTING TASK
Designed for your handling path.
A grab-equipped single-girder crane using two electric hoists with a four-rope grab for loose-material handling.
Crane arrangement
Single girder with grab with Two electric hoists.
MODEL LDZ
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity · available range1–10 t
Rated capacity · catalogue grab configurations3 t / 5 t, including the grab self-weight
Crane span · 3 t and 5 t catalogue options7.5 / 9 / 10.5 / 12 / 13.5 / 15 / 16.5 / 19.5 / 22.5 m
Lifting height · catalogue configurations18 m
Duty class · catalogue configurationsA3
Hoisting speed · 3 t / 5 t16 / 16 m/min
Grab volume · 3 t / 5 t0.75 / 1.5 m³
Grab self-weight · 3 t / 5 t2.3 / 3.1 t
Grab arrangementTwo electric hoists and a four-rope grab
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Bulk material transfer
Compare the Grab Overhead Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Runway and building interface
Confirm runway centers, wheel loads, building clearances and hook approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Material, grab volume and cycles
PRODUCT PHOTOS
See the LDZ configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a LDZ crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
