Skip to content
CRANE MANUFACTURER SINCE 2002
info@hnksglobal.com+86 188 3620 7779Project enquiry ↗
Henan Mine Crane Request a quote
HENAN MINE CRANE / GANTRY CRANES

L-Type Gantry Crane

A single-girder, L-leg winch gantry for long loads and open-air material transfer.

MDGModel designation5–50 tRated load selection
Henan Mine Crane L-Type Gantry Crane (MDG)PRODUCT CONFIGURATION / MDG
THE LIFTING TASK

Designed for your handling path.

A single-girder, L-leg winch gantry for long loads and open-air material transfer.

01 / APPLICATION

Where it fits

Cargo yards and wharves

02 / EQUIPMENT

Crane arrangement

Single girder / L leg with Winch and hook.

MODEL MDG

Technical configuration

Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.

Rated capacity5–50 t
Crane span18–35 m
Bridge / structureSingle girder / L leg
Lifting systemWinch and hook
Lifting heightSet from the pickup level and highest required hook position
Control arrangementPendant or radio remote to suit operator visibility
Power supplyMatch voltage and frequency to the destination site
Runway and foundationsCheck rail gauge, wheel loads and foundation design
Hook approach and clearanceConfirm required lifting envelope against the site drawings
Operating cycleDefine load spectrum, lifts per hour and operating shifts
BUYER'S SELECTION GUIDE

Specify the crane around the job.

Cargo yards and wharves

Compare the Gantry Cranes range ↗
01

Load and lifting attachment

Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.

02

Rails and working envelope

Confirm rail gauge, runway length, foundation capacity, cantilever and end approaches.

03

Duty and controls

State typical load, lifts per hour, travel distance, shifts, control position and site power supply.

04

Model-specific check

Long-load passage; rail layout; cantilever

TALK TO OUR ENGINEERS

Get a MDG crane proposal.

Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.

Request a technical proposal ↗
  • Maximum lifted load and attachment
  • Span, travel length and available clearances
  • Daily lifting cycle and control choice
  • Power supply, environment and destination