Paper-machine roll and shaft handling
Use a selected hook pair for components that need separated pickup points. Match trolley ratings and hook spacing to the roll-handling attachment.
Bridge cranes for workshops and production lines.
Explore Overhead Cranes
Ground-supported lifting for yards and construction.
Explore Gantry Cranes
Wire rope and chain hoists for lifting points and cranes.
Explore Electric Hoists

Wire rope lifting and pulling with a powered drum.
Explore Electric Winches
Grab buckets, magnets and hooks for your load.
Explore Lifting Attachments & Grabs
Mobile handling for containers, precast and yard loads.
Explore Rubber-Tired Gantry Cranes & Straddle Carriers

Lift and move vessels through boatyards and marinas.
Explore Marine Travel Lifts
Ladle, slab, scrap and coil handling across steel production.

Container stacking and cargo transfers across terminals and rail.

Turbine installation, powerhouse maintenance and wind equipment assembly.

Controlled component transfer and positioning for precision assembly.

Heavy fabrication, production lifting and factory crane automation.

Process lifting for smelters, carbon blocks and anode materials.

Clean lifting and classified protection for sensitive process areas.

Bridge fabrication, metro construction and ship block assembly.

Automated storage and retrieval for plates, cables and bins.

Follow project dispatches, crane engineering and factory acceptance.

Dispatch, installation and equipment in service

Crane configurations and handling technology

Factory inspections, acceptance and test programmes

Company developments, people and community programmes
Serve paper-machine lifting and maintenance jobs with three hook trolleys on one double girder bridge. QES supports one trolley working independently or an approved pair working together, with PLC sequence control and a paper-machine DCS interface available.
Tell us what you need to lift and your approximate span. We’ll help you choose the lifting arrangement.

Start with the dimensions you already know. A workshop photo or sketch can help us recommend a configuration.
Select three trolley ratings and hook positions around the rolls, shafts and maintenance loads that the bay needs to handle.
Individual and approved paired modes let the lifting arrangement follow the component and its pickup points.
PLC sequence functions and a DCS interface can be specified when the crane needs to exchange operating information with the paper-machine system.

Use a selected hook pair for components that need separated pickup points. Match trolley ratings and hook spacing to the roll-handling attachment.
Use an individual trolley for a suitable component lift, or an approved pair for a larger maintenance load in the same working bay.
Specify repeat lifting sequences and process-system signals where the crane operation is part of a planned production or maintenance workflow.
QES is arranged for one trolley or an approved pair. The selected hook combinations, individual ratings and combined-load cases are identified in the technical offer.
Compare the available options for your lifting task. Capacity, span, lift height and speed are matched in the selected configuration.
| Model | QES |
|---|---|
| Rated capacity | Three individual trolley ratings and approved combined-load cases |
| Span | Custom rail-centre span to the production bay |
| Lifting height | Custom hook travel from pickup to placement level |
| Working duty | Selected from load spectrum, lifts per hour and operating shifts |
| Hoisting speed | Selected for roll, shaft and machine handling |
| Trolley / bridge travel | Speeds matched to single- and paired-trolley operations |
| Lifting arrangement | Hooks; Three trolleys |
| Control | PLC sequence control; paper-machine DCS interface available |
| Power supply | Three-phase supply matched to destination voltage and frequency |
| Operating environment | Industrial service package matched to site conditions |
| Trolley arrangement | Three hook trolleys; independent or approved paired operation |
The product views show how the three hook trolleys are arranged on the double girder bridge.


Start with the components to be lifted and their pickup points. The trolley arrangement and controls follow those jobs.

List the heaviest component for each lifting job, together with its attachment weight and lifting-point spacing.
Set each trolley’s rating and the hook pairs needed in operation. The order defines the permitted paired load and trolley positions for each task.
Choose the speeds for roll removal, transfer and placement, together with the working span and hook travel needed around the machine.
Specify independent and paired modes, movement interlocks and any DCS signals. Agree the required process sequence and operator control arrangement.
Compare the equipment, documentation, delivery and service scope for the configuration you need.
Request a QES crane for the paper-machine bay or a project quantity. The order identifies all three trolley ratings and the required hook combinations.
List the bridge, three complete trolleys, hook equipment and controls. Identify roll attachments, process interfaces, power supply equipment, transport and site services as included or separately priced items.
Include the arrangement, trolley ratings, permitted pairs and load cases, operating instructions, electrical drawings and agreed test records. Ordered DCS functions include an agreed interface and signal schedule.
Agree dispatch after the roll and maintenance lifting jobs, trolley arrangement and PLC or DCS scope are selected. Interface testing and site commissioning are planned in the schedule.
Define crane assembly, electrical work, commissioning and operator familiarisation. The selected single and paired modes and any process interface are checked against the agreed mill operating sequence.
Confirm coverage for all trolley mechanisms, bridge drives and supplied controls. Identify recommended mechanism spares and the support arrangement for any ordered PLC or DCS interface.
Find the arrangement, equipment options and order information that suit your application.
QES is a three-trolley hook crane widely used in paper mills. Its trolley arrangement is selected for the mill’s component lifting and maintenance tasks, including suitable roll and shaft handling arrangements.
A trolley can operate independently, or an approved pair can work together. The technical offer identifies the selected hook combinations, travel limits and combined-load cases.
Use the approved operating cases for the crane. Each trolley has its own rating, and paired operation has a separate permitted load and load distribution. The three individual ratings do not define a single unrestricted lifting capacity.
QE has two hook trolleys for independent or paired long-load handling. QES has three trolleys and is selected around paper-mill jobs that need different hook positions or approved pairs within one bridge arrangement.
Provide the roll and shaft mass, attachment weight, lifting points and removal route. These determine the individual ratings, selected hook pairs, lifting height and trolley spacing.
A paper-machine DCS interface is available through the selected PLC arrangement. The order defines the industrial communication interface, signals, operating permissions and any action sequence.
The quotation identifies the supplied hook equipment and any roll-handling attachment. Include attachment dimensions, tare weight and pickup details so it can be matched to the trolley arrangement.
Send a list of the lifting jobs, component weights, hook pairs, working span, lift and mill power supply. Include any PLC or DCS interface and the required installation support so the offer can set the equipment scope and schedule.
Include the crane arrangement, trolley ratings, permitted hook combinations, controls and interface documents, operating instructions and inspection records. The order also sets warranty coverage, recommended spares and commissioning support.
Tell us what you need to lift, your project location and any dimensions you already know. We’ll help you choose a suitable configuration.
info@cranehenanmine.com