Where it fits
Long loads and paired lifting
HENAN MINE CRANE / OVERHEAD CRANES
QE Double-Trolley Hook Overhead Crane
Two hook trolleys can lift independently or together when long loads need two controlled lifting points.
QEModel designation5+5 to 16+16 tRated load selection
PRODUCT CONFIGURATION / QETHE LIFTING TASK
Designed for your handling path.
Two hook trolleys can lift independently or together when long loads need two controlled lifting points.
Crane arrangement
Overhead Cranes with Two hook sets.
MODEL QE
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity · catalogue configurations5 + 5 t / 10 + 10 t / 16 + 16 t
Crane span · catalogue options10.5 / 13.5 / 16.5 / 19.5 / 22.5 / 25.5 / 28.5 / 31.5 m
Maximum lifting height16 m
Duty classA5 or A6
Hoisting speed · A5 (5+5 / 10+10 / 16+16 t)11.3 / 8.5 / 7.9 m/min
Hoisting speed · A6 (5+5 / 10+10 / 16+16 t)15.6 / 13.2 / 10.7 m/min
Trolley travel · A5 (5+5 / 10+10 / 16+16 t)37.2 / 43.8 / 44.6 m/min
Catalogue power supplyThree-phase AC 380 V / 50 Hz
Trolley / attachmentTwo hook trolleys; independent or planned tandem lifting
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Long loads and paired lifting
Compare the Overhead Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Runway and building interface
Confirm runway centers, wheel loads, building clearances and hook approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Combined load and trolley spacing
PRODUCT PHOTOS
See the QE configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a QE crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
