CD Electric Wire Rope Hoist
Lift components, tooling and machinery with a CD electric wire rope hoist for a fixed lifting point, beam travel or a matched crane. Select the lifting package around the complete load, hook travel, operating cycle and available clearance.
For a quotation, send the rated capacity or complete suspended load, lifting height, mounting arrangement, quantity and site power. Add a beam drawing and travel length for a trolley-mounted unit.
Your quotation confirms the exact capacity, lift, mounting, speeds, duty and supply scope.
Match the workpiece, rigging and required hook travel to one selected capacity and lifting height.
Check flange dimensions, travel length, end approach and power feed with the complete installed load.
Identify the hoist, trolley, controls, documents and delivery scope so quotations can be compared.

CD hoists for workshop lifting and machinery maintenance
Machinery maintenance
Remove motors, gearboxes or machine components at a service point. Check the highest hook position, sling depth and access for inspection before selecting the mounting.Transfer along a workshop bay
Move loads between pickup and set-down positions with a compatible trolley or host crane. Define the route, end stops and required hook coverage.General-purpose CD equipment is not a substitute for a separately specified explosion-proof or molten-metal lifting design.
CD₁ capacity, lifting height and speed options
Swipe to compare the complete capacity row
| CD₁ load (metric t) | Lift-height choices (m) | Hoisting (m/min) | Trolley options (m/min) | Hoist motor (kW) | Travel motor (kW) |
|---|---|---|---|---|---|
| CD₁ 0.25 t | 3 / 6 / 9 | 8 | 20 | 0.4 | 0.06 |
| CD₁ 0.5 t | 3 / 6 / 9 | 8 | 20 or 30 | 0.8 | 0.2 |
| CD₁ 1 t | 6 / 9 / 12 / 18 / 24 / 30 | 8 | 20 or 30 | 1.5 | 0.2 |
| CD₁ 2 t | 6 / 9 / 12 / 18 / 24 / 30 | 8 | 20 or 30 | 3 | 0.4 |
| CD₁ 3 t | 6 / 9 / 12 / 18 / 24 / 30 | 8 | 20 or 30 | 4.5 | 0.4 |
| CD₁ 5 t | 6 / 9 / 12 / 18 / 24 / 30 | 8 | 20 or 30 | 7.5 | 0.8 |
| CD₁ 10 t | 9 / 12 / 18 / 24 / 30 | 7 | 20 or 30 | 13 | 0.8 × 2 |
| CD₁ 16 t | 9 / 12 / 18 | 3.5 | 20 | 13 | 0.8 × 2 |
| CD₁ 20 t | 9 / 12 / 18 | 4 | 20 | 18.5 | 0.8 × 4 |
CD₁ reference choices use three-phase AC 380 V / 50 Hz; the catalogue lists FC 25% duty. Lift heights and travel speeds are alternatives within each capacity row. Multi-motor entries show power per motor × motor count. Confirm the selected unit's speeds, duty basis, dimensions and power supply before ordering.
Confirm the installed lifting package
| Rated load | Include the workpiece and all below-the-hook attachments; assess the operating cycle separately |
|---|---|
| Installed hook height | Show the highest and lowest hook positions, load height and sling depth on the arrangement drawing |
| Beam and trolley | Confirm the actual beam section and flange dimensions, wheel reactions, travel route and end approach |
| Power and controls | State site voltage, phase and frequency, control location, power feed and required motion commands |
| Duty and environment | Provide lifts per hour, shifts, load pattern and site conditions for the selected-unit rating |
| Acceptance documents | Agree the model-specific data sheet, dimensional drawing, inspection records, wiring information and operating instructions |
Fixed, trolley-mounted or part of a complete crane
Swipe to compare the lifting arrangements
| Arrangement | Lifting task | Installation checks | Quotation scope |
|---|---|---|---|
| Fixed CD hoist | Vertical lifting at one rated support | Suspension, highest hook position and maintenance access | Hoist, fixed suspension, controls and power connection |
| Beam-travelling CD hoist | Lifting and travel along a suitable beam | Flange dimensions, wheels, route, end stops and approach | Hoist, powered trolley, controls and travel power feed |
| Crane-mounted CD hoist | Lifting within a matched overhead, gantry or jib crane | Host-crane rating, trolley interface, hook coverage and reactions | Hoist and crane supply responsibilities identified together |
| MD₁ two-speed alternative | A slower final lifting approach as well as normal hoisting | Separate MD₁ capacity, height, speed pair and motor schedule | A separately specified model; not an assumed CD speed upgrade |
A compatible trolley and rated support are essential for travelling installations. A catalogue dimension is not an installed upper-hook-height guarantee; approve the actual mounting drawing.
Review the trolley, rope drum and drive layout
Compare a complete CD hoist package
Hoist and lifting components
List the selected CD unit, rope length, hook block, brake and limit arrangements, with the rated load, lifting speed and duty on the equipment schedule.Mounting and travel equipment
Identify fixed suspension or the selected trolley, beam interface, travel drive, end stops and power-feed components included in the offer.Controls and technical documents
Agree the control station, motion commands, emergency stop and electrical interfaces, plus the drawing, wiring information and inspection records supplied.Delivery and site support
Separate packing, freight, customs, installation, commissioning, training and spare parts where required. Set each party's responsibilities in the purchase documents.CD electric wire rope hoist price guide
Budget configuration: electric trolley, pendant control, 9 m lift and 380 V / three-phase / 50 Hz supply. Confirm the lifting and trolley speeds for the selected unit.
| CD configuration | Mounting / control | Budget range · USD |
|---|---|---|
| 2 t × 9 m lift | Electric trolley · pendant | US$700–1,400 |
| 3 t × 9 m lift | Electric trolley · pendant | US$900–1,800 |
| 5 t × 9 m lift | Electric trolley · pendant | US$1,200–2,400 |
Preliminary planning estimates, not firm quotations. The equipment budget covers the selected CD hoist, electric trolley, pendant controls and technical documents. It excludes supporting steelwork, runway and power-feed installation, freight, import duties, taxes, site electrical work, installation and commissioning. Longer lifts, special controls, destination conformity and nonstandard duty can change the price.
Agree the order, delivery and service terms
One unit or several lifting points
Send the required quantity and configuration at each location. The written offer confirms the accepted quantity and unit package.Match the records to the unit
Request the selected model's technical and inspection records and any conformity documents required for the receiving country.Agree dates after technical review
Confirm drawing approval, production, inspection and dispatch milestones, then allow separately for transport and site work.Put service terms in the order
Agree warranty duration, coverage, exclusions and the service route. Identify the model and installed components when ordering spare parts.CD electric wire rope hoist purchasing FAQs
What is a CD electric wire rope hoist?
CD is a general-purpose electric wire rope hoist family for lifting at a fixed point or with a compatible trolley and crane. The CD₁ catalogue configurations on this page use single-speed hoisting. Capacity, lifting height, mounting and duty must be confirmed together for the unit ordered.
What is the difference between CD and CD₁?
CD is the family name used on this page; the numerical table retains the CD₁ model designation printed in the catalogue. Use the exact offered model and nameplate when comparing dimensions, motors, rope and replacement parts.
How is CD different from an MD₁ two-speed hoist?
The CD₁ table gives one normal hoisting speed for each capacity. MD₁ is a separately specified two-speed model with normal and slower hoisting. Request its own paired capacity, lifting height, speed and motor schedule when accurate final placement needs a slower approach.
How do I select capacity and lifting height?
Add the workpiece, lifting beam, slings and other below-the-hook attachments to obtain the complete suspended load. Measure the required highest and lowest hook positions. Match the chosen capacity and lift to the operating cycle and installed drawing.
Will the trolley fit my existing I-beam?
Send the beam section, flange dimensions, travel length, curves if any, and required end approach. Check trolley fit and support reactions using the actual hoist, trolley and operating loads. A nominal beam name alone does not confirm compatibility.
Can I order a different voltage or a radio remote control?
State the required voltage, phase, frequency and control method in the enquiry. The reference table is not approval for every site supply. The quotation must identify the selected motors, control equipment and power-feed arrangement.
Is a CD hoist suitable where headroom is limited?
Compare the selected unit's upper-hook position and installation envelope with the available building section. If the required hook height cannot be reached, assess a KS1 low-headroom arrangement using the same load and building dimensions.
Are the trolley, beam and installation included in the price?
Only the written supply scope establishes what is included. Ask the offer to identify the hoist, trolley or suspension, controls, power feed and supporting steel separately, with packing, transport, installation and commissioning as applicable.
Which details are needed for replacement rope or hoist parts?
Provide the nameplate, model, rated load, lifting height and component identification or photographs. Match rope diameter and construction, hook block, guide, brake and electrical parts to the actual assembly; tonnage alone is not enough.


























