Rotating Crane Load Test for Xi’an Aerospace Composite Manufacturing
A lower-rotating crane with dual attachments completed its load test, with project control precision below 1 mm.
The project and its handling task.
Henan Mine Crane built a lower-rotating crane for the Xi’an Aerospace Composite Materials Research Institute. The institute produces solid rocket motor composite casings, nozzles and large composite launch tubes.
The crane completed its load test. Modular design and finite-element structural analysis were combined with a dual-attachment arrangement; the project’s stated control precision is below 1 mm. The lifting and orientation requirements follow the geometry of the composite components.
Rotate composite structures accurately during manufacturing.
Composite aerospace parts can be long, sensitive to local contact and difficult to orient with a fixed hook.
Set attachment positions where the composite structure can be lifted safely.
Check sweep clearance and synchronized motion through the required angle.
Approach slowly and confirm alignment before release.
Approach slowly and confirm alignment before release.
The equipment behind this project.
The crane completed its load test. Modular design and finite-element structural analysis were combined with a dual-attachment arrangement; the project’s stated control precision is below 1 mm. The lifting and orientation requirements follow the geometry of the composite components.
- ApplicationAerospace composite component manufacture
- Crane arrangementLower-rotating crane with dual attachments
- Design methodModular design and finite-element structural analysis
- Project control precisionBelow 1 mm
- Acceptance milestoneLoad test completed
What to compare with your own project.
Match the project configuration to your load, layout and operating sequence before selecting a crane package.
| Design area | This project configuration | Define for your site |
|---|---|---|
| Application | Aerospace composite component manufacture | Composite dimensions and mass. Define the required operating envelope and acceptance checks in your technical brief. |
| Crane arrangement | Lower-rotating crane with dual attachments | Fixture and lift-point drawings. Define the required operating envelope and acceptance checks in your technical brief. |
| Design method | Modular design and finite-element structural analysis | Rotation envelope. Define the required operating envelope and acceptance checks in your technical brief. |
| Project control precision | Below 1 mm | Loaded positioning test method. Define the required operating envelope and acceptance checks in your technical brief. |
| Acceptance milestone | Load test completed | Composite dimensions and mass. Define the required operating envelope and acceptance checks in your technical brief. |
See the equipment and working environment.
Explore the equipment arrangement and handling environment.
Load test completed.
The crane completed its load-test milestone for the aerospace composite project. Its dual attachments and controlled rotation address positioning and orientation during component handling.
For a similar project, use a lower-rotating crane with a dual-attachment arrangement matched to the actual fixture. Model the structure and verify rotation, load sharing and sub-millimeter control requirements against the test plan.
Continue from the project to the right crane family.
Use the project as a reference and specify the crane against your own yard layout and cargo.
Prepare a comparable crane quotation.
Share the load schedule and site drawings. Use a lower-rotating crane with a dual-attachment arrangement matched to the actual fixture. Model the structure and verify rotation, load sharing and sub-millimeter control requirements against the test plan.
We can quote a single crane or a coordinated fleet. The offer sets out the destination standards, required certificates and inspection records, manufacturing programme after drawing approval, shipment, installation support and agreed acceptance scope.
- Composite dimensions and mass
- Fixture and lift-point drawings
- Rotation envelope
- Loaded positioning test method
- Destination standards, quantity and inspection documentation
- Manufacturing programme, shipment, commissioning, training and spares
Questions before specifying a similar crane.
Can the same project crane be supplied for my site?
We customize the capacity, span, lifting height, attachment and controls to the load, building or yard layout and operating cycle. Composite dimensions and mass is one of the inputs to review before final equipment selection.
How are certification, quantity and lead time agreed?
Single-crane and fleet enquiries are welcome. Define the destination and required standards in the enquiry. The project offer confirms certification and inspection documents, the quantity, drawing approval and manufacturing schedule, with the shipping and site-service boundaries.
What should acceptance and after-sales support include?
Agree the inspection plan, representative load and functional tests, operator training, maintenance instructions, spare-parts scope and fault-recovery procedures. For this application, include loaded positioning test method in the technical review.
Planning a similar lifting project?
Send your layout, load and operating requirements. We can develop a customized crane package and delivery scope for your site.