Where it fits
General material transfer between two ground rails
HENAN MINE CRANE / ELECTRIC HOIST GANTRY CRANES
Electric Hoist Gantry Crane
Start here for routine hook handling.
A full gantry with an electric hoist covers repeated lifting between ground rails. Define the load path and operating cycle first; the hoist and duty are then sized to the job.
MHModel designation3 / 5 / 10 / 16 / 20 tRated load selection
PRODUCT CONFIGURATION / MHTHE LIFTING TASK
Designed for your handling path.
A full gantry with an electric hoist covers repeated lifting between ground rails. Define the load path and operating cycle first; the hoist and duty are then sized to the job.
Crane arrangement
Full gantry with Electric hoist and hook.
MODEL MH
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity · MH box-girder configurations3 / 5 / 10 / 16 / 20 t
Crane span · 3 t12 / 16 / 20 / 24 m
Crane span · 5–20 t12 / 16 / 20 / 24 / 30 m
Lifting height · reference configurations6 or 9 m
Hoisting speed · 3 / 5 / 10 / 16 / 20 t8 / 8 / 7 / 3.5 / 3.5 m/min; 3–10 t tables also list dual-speed hoists
Electric-hoist travel · reference configurations20 m/min
Duty class · 3–16 t reference configurationsA3
Catalogue power supplyThree-phase AC 380 V / 50 Hz
Structure / hoistBox-girder single-girder gantry with CD1, MD1 or HC hoist by capacity
BUYER'S SELECTION GUIDE
Specify the crane around the job.
General material transfer between two ground rails
Compare the Electric Hoist Gantry Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Rails and working envelope
Confirm rail gauge, runway length, foundation capacity, cantilever and end approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Maximum suspended load; rail centers; daily lift cycle
PRODUCT PHOTOS
See the MH configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a MH crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
