Skip to content
Henan mine crane co., ltd. Get a project quote
KSMB / European-style electric hoist; variable-frequency lifting/travel

KSMB New-Design Electric Hoist Semi-Gantry Crane

KSMB combines a single girder, European-style electric hoist and variable-frequency lifting and travel in a semi-gantry layout. One side follows an elevated runway and the opposite leg a ground rail. Check the load, hook range, supporting structure and floor traffic within the same working strip.

Bridge
Single-girder semi-gantry
Lifting package
European-style electric hoist
Motion control
Variable-frequency lifting and travel
Photograph: Factory-listed single-girder electric-hoist semi-gantries in a workshop
KSMB workshop application along a ground rail and elevated runway. Installation / series photograph.
01 / APPLICATIONS

Where the KSMB
fits the work.

01

Workshop-edge component handling

Move rigged components between preparation, machine-side and assembly positions along a defined workshop strip. The elevated runway can follow one side of the area while the opposite travelling leg follows a coordinated floor corridor.

02

Storage-to-production transfer

Connect a side storage area with nearby production positions using lifting, cross travel and long travel. Plan the load route around columns, racks and doors, then keep the floor-side rail and leg route compatible with the receiving activity.

03

Material handling with a selected attachment

Hook, grab and electromagnetic-chuck options address different materials. A grab or magnet arrangement needs a compatible hoist, attachment interface and electrical package. Include attachment self-weight when establishing the material payload and operating cycle.

02 / TECHNICAL SPECIFICATIONS

KSMB specifications
and equipment configuration.

Compare the lifting mechanism, control functions and site interfaces for the selected crane.

KSMB selection ranges. Capacity, span and lifting height are selected as one complete arrangement. Confirm the supply combination and protected-equipment scope in the electrical schedule.

KSMB technical specifications and configuration
ModelKSMBRated lifting capacity1–32 t
Span6–35 mLifting height4–20 m
Girder arrangementSingle girderRunway/support layoutSemi-gantry; one elevated runway and one ground rail
Lifting mechanismElectric hoistHoist/trolley arrangementEuropean-style electric hoist; suspended travel arrangement shown
Lifting attachmentHook / grab / electromagnetic chuck optionsWorking classA3–A5
Lifting speedLifting and positioning speeds matched to the selected electric hoistTrolley travel speedCross-travel speed and stopping control selected for the load route
Crane travel speedLong-travel speed selected for the runway and operating cycleTravel drive / motion controlThree-in-one direct-connected travel drive; variable-frequency lifting/travel
Operating controlsCabin / pendant / wireless remote / PLC linkage optionsCantilever arrangementWith or without cantilever
Electrical supply380 V / 50 Hz; 220–660 V / 50–60 Hz supply optionsElectrical protectionIP54 option; protected equipment scope defined in the electrical schedule
Runway rail profileRail section matched to wheel geometry, reactions and supporting structureMotor ratingsLifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating patternIntermittent, repeated loading/unloading and material handlingSpeed adjustment ratio1:10
Reducer gear tooth hardness≥60 HRCSite layoutOverall height, leg clearance and hook approach shown in the crane drawing
03 / EQUIPMENT VIEWS

See the KSMB arrangement.

Review the original equipment views alongside the selected crane drawing.

Manufacturer rendering: Three-quarter view of the new-design single-girder semi-gantry
Three-quarter view of the new-design single-girder semi-gantry — manufacturer rendering.
Manufacturer rendering: Opposite view showing the elevated-runway end
Opposite view showing the elevated-runway end — manufacturer rendering.
Photograph: Factory-listed single-girder electric-hoist semi-gantries in a workshop
Factory-listed single-girder electric-hoist semi-gantries in a workshop — installation / series example.
04 / CONFIGURATION

Choose the KSMB equipment and site interfaces.

01 / OPTION

Single-girder lifting package

Select the suspended European-style electric hoist for complete load, rigging, upper hook position and final placement. Hook, grab or electromagnetic chuck changes self-weight, connections, power, duty and the configured lifting package; select A3–A5 with typical and busiest-shift loads.

02 / OPTION

Coverage and two runway levels

Define horizontal rail-centre span, both rail elevations, hook approaches and any cantilever pickup. Use selected wheel loads and vertical and horizontal reactions to assess the elevated building-side support, ground foundation and any existing construction.

03 / OPTION

Motion, controls and supply

Variable-frequency lifting and travel and direct-connected three-in-one travel drives form the described package. Select pendant, remote, cabin or PLC-linked operation; agree required commands, status signals and control authority. Match voltage, phases, frequency and equipment-specific protection to the site.

04 / OPTION

Floor corridor and installation

Check hoist headroom, load and rigging against roofs, doors, services and adjacent equipment. Coordinate the travelling leg, ground rail, vehicle crossings, pedestrians and maintenance access. Identify responsibility for supports, rails, power feed, assembly and commissioning.

05 / PURCHASING & DELIVERY

Confirm the complete KSMB supply scope.

ORDER

Order quantity

Enquire for one crane or your project quantity. Share load, approximate span, useful lift and destination; unknown dimensions can remain open. A description, sketch or site photograph can develop the arrangement.

QUOTATION

Equipment and quotation scope

Identify hoist, bridge, drives, attachment and controls; define runway, power-feed, packing, freight and installation scope. Agree price and manufacturing and delivery schedules for that package.

DOCUMENTS

Drawings and equipment documents

Agree project and destination requirements, general arrangement, support reactions, equipment and electrical schedules, installation information and operating and maintenance instructions.

ACCEPTANCE

Standards and acceptance

Define factory tests, site checks and acceptance records for crane and attachment. Separate crane inspection from assessment of existing supports and civil work using selected reactions.

DELIVERY

Delivery and installation

Plan unloading, assembly and elevated-runway access. Allocate support readiness, rail alignment, erection, power connection and commissioning before installation.

SUPPORT

Warranty and spare parts

Request hoist and drive maintenance and spares information. State warranty terms and start point, installation assistance and after-sales responsibilities in writing.

CONTINUE YOUR COMPARISON

Compare related
gantry arrangements.

All 9 single-girder models ↗
07 / QUESTIONS BEFORE ORDERING

Choose the KSMB
with the job in view.

Compare the handling task, selected lifting equipment and supply scope before ordering.

What makes KSMB a semi-gantry crane?

One supporting side runs on an elevated runway and the opposite side uses a ground rail and travelling leg. Both interfaces carry crane reactions. The arrangement therefore needs a suitable elevated support as well as a coordinated floor-side runway and foundation.

How does KSMB differ from MB₁ and MBES?

KSMB has a single-girder bridge with a European-style electric hoist. MB₁ and MBES use double-girder electric-hoist trolley arrangements. Compare the selected drawings for hook height, approaches, support reactions and duty; the model name alone does not establish which arrangement fits your bay.

Can an existing building support the elevated runway?

It can be considered when the existing beams, connections, columns and foundations are suitable for the selected crane reactions and operating duty. A nearby wall or an existing rail does not establish that suitability. You can begin the crane enquiry before the final support assessment is complete.

How should I measure span and lifting height?

Use the horizontal distance between the two runway rail centre lines for span, and show the elevation of each rail. Describe the hook positions needed at pickup and landing, including rigging and the workpiece. The equipment drawing then resolves useful hook height, approaches and overhead clearances.

Can vehicles cross the ground-rail route?

Describe the proposed crossings and how vehicles use the area. The rail, wheels and moving leg must be coordinated with vehicle and pedestrian routes, including crane stopping positions. Any crossing arrangement belongs in the site layout and installation scope rather than being assumed clear from the span.

Does variable-frequency control specify the actual lifting speed?

It identifies the motion-control arrangement. The selected hoist and drive schedule establishes lifting and travel speeds and the required positioning functions. State how the load is picked up and set down, as well as the travel distance and handling frequency, to select a useful operating package.

Can a grab or electromagnetic chuck be supplied?

These are attachment options for suitable materials. The attachment, hoist, electrical supply and controls must be selected together, with attachment self-weight included in the complete suspended load. Ask the offer to identify the specific attachment and operating functions included.

What information is needed for an initial quotation?

Start with the load, approximate rail-centre span, useful lifting height and destination; leave any unknown dimension open. A sketch or photograph is helpful but optional. Runway elevations, support information, power supply and traffic clearances can be developed as the proposed arrangement takes shape.

08 / YOUR KSMB GANTRY PROJECT

Get a quotation
for your KSMB crane.

Tell us what you lift, the approximate span, the required lifting height and your destination. If a dimension is unknown, describe the task and leave that field open.

  • An arrangement matched to the lifting task
  • A clear equipment and service scope
  • Delivery and support terms in the offer

info@cranehenanmine.com

PRODUCT SELECTEDKSMB New-Design Electric Hoist Semi-Gantry Crane

Not sure about a dimension? Leave it blank. A site sketch is helpful when available.

KSMB gantry craneDiscuss your lifting task
Request a quote ↗
KSMB equipment gallery
Enlarged KSMB crane image

↑