Skip to content
Henan mine crane co., ltd. Get a project quote
KSMHS / Electric-hoist lifting configurations

KSMHS New-Design Double-Girder Electric Hoist Gantry Crane

KSMHS combines a double-girder bridge, top-running electric-hoist trolley and two ground-supported runways. Variable-frequency lifting and travel support the selected transfer and final-positioning task. Choose hook, grab or electromagnetic handling with the material, complete suspended mass, useful clearances and operating cycle.

Structure
New-design double-girder full gantry
Motion
Variable-frequency lifting and travel
Attachments
Hook, grab or electromagnetic configurations
Manufacturer rendering: Three-quarter view of the new-design double-girder gantry
KSMHS new-design double-girder gantry arrangement. Manufacturer rendering.
01 / APPLICATIONS

Where the KSMHS
fits the work.

01

Machinery and fabrication positions

Move assembled sections and fabricated components between workstations, then lower them into a defined position. Variable-frequency motion is useful when the last part of a lift needs a slower, controlled approach.

02

Ferrous material handling lanes

Handle compatible steel stock with an electromagnetic lifting package. Match the magnet, power system and complete suspended load to the material and handling cycle.

03

Loose material transfer areas

Transfer loose bulk material between storage and loading points with a matched grab package. Select grab volume and useful payload from material density, grab self-weight and duty cycle.

02 / TECHNICAL SPECIFICATIONS

KSMHS specifications
and equipment configuration.

Compare the lifting mechanism, control functions and site interfaces for the selected crane.

KSMHS technical specifications and configuration
ModelKSMHSRated lifting capacitySelected for the complete suspended load, including rigging
SpanRail-centre span selected for the working areaLifting heightHook travel and headroom selected for pickup / set-down levels
Girder arrangementDouble girderRunway/support layoutFull gantry; ground rails on both sides
Lifting mechanismElectric hoistHoist/trolley arrangementTop-running electric-hoist trolley
Lifting attachmentHook / grab / electromagnetic lifting configurationsWorking classA3–A5
Lifting speedLifting and positioning speeds matched to the selected electric hoistTrolley travel speedCross-travel speed and stopping control selected for the load route
Crane travel speedLong-travel speed selected for the runway and operating cycleTravel drive / motion controlVariable-frequency lifting and travel
Operating controlsOperator control package selected for visibility and the lifting taskCantilever arrangementWith or without cantilever
Electrical supplySite voltage, phases, frequency and power feed matched in the electrical packageElectrical connectorsHeavy-duty electrical plug connectors: IP55
Runway rail profileRail section matched to wheel geometry, reactions and supporting structureMotor ratingsLifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating patternIntermittent, repeated loading/unloading and material handlingSpeed adjustment ratio1:10

Capacity, span, lifting height and duty are selected together. The agreed equipment schedule and drawing define your crane configuration.

03 / EQUIPMENT VIEWS

See the KSMHS arrangement.

Review the original equipment views alongside the selected crane drawing.

Manufacturer rendering: Three-quarter view of the new-design double-girder gantry
Three-quarter view of the new-design double-girder gantry — manufacturer rendering.
Manufacturer rendering: Opposite three-quarter view of the new-design double-girder gantry
Opposite three-quarter view of the new-design double-girder gantry — manufacturer rendering.
Manufacturer rendering: End view showing the double-girder gantry structure
End view showing the double-girder gantry structure — manufacturer rendering.
04 / CONFIGURATION

Choose the KSMHS equipment and site interfaces.

01 / OPTION

Top-running hoist and attachment

Match hook, grab or electromagnetic equipment to the material, total suspended mass and operating cycle. The electric-hoist trolley runs above the double-girder bridge; allow space above it as well as useful travel below the hook.

02 / OPTION

Variable-frequency motion

Select lifting, lowering and travel acceleration, speeds and stopping behavior for pickup and accurate placement. State load frequency and loaded-travel requirements with the attachment and duty rather than choosing nominal capacity alone.

03 / OPTION

Coverage and runways

Choose a bridge with or without cantilever as selected. Coordinate useful hook approaches, leg clearance and pickup positions with both ground-supported sides, the full load route and final wheel reactions.

04 / OPTION

Electrical and service environment

The heavy-duty attachment connectors are rated IP55; cabinet, motor and attachment protection require their own selection. State supply, dust, moisture and weather exposure. Provide access to trolley inspection, attachment connections and maintenance clear of overhead obstructions.

05 / PURCHASING & DELIVERY

Confirm the complete KSMHS supply scope.

ORDER

Order quantity

The quotation should identify the crane quantity, lifting attachment, variable-frequency motion package and the required hook or discharge coverage.

QUOTATION

Equipment and quotation scope

Confirm minimum order terms with the supplier and separate optional attachments, power-feed equipment and civil interfaces in the commercial scope.

DOCUMENTS

Drawings and equipment documents

Review actual motion speeds, attachment connections, general arrangement and wheel reactions for the selected KSMHS before approving the equipment schedule.

ACCEPTANCE

Standards and acceptance

Agree destination standards, electrical documentation and test scope for the supplied configuration, including any attachment-related checks and operating instructions.

DELIVERY

Delivery and installation

Transport and assembly planning should account for the bridge, top-running trolley and selected attachment, with a clear commissioning sequence.

SUPPORT

Warranty and spare parts

Confirm the delivery schedule and installation support in the order, followed by warranty terms, maintenance guidance and suitable spare-parts provision.

CONTINUE YOUR COMPARISON

Compare related
gantry arrangements.

All 16 double-girder gantry models ↗
07 / QUESTIONS BEFORE ORDERING

Choose the KSMHS
with the job in view.

Compare the handling task, selected lifting equipment and supply scope before ordering.

How does KSMHS differ from MHS?

Both use a double-girder bridge and an electric-hoist trolley. KSMHS adds a variable-frequency lifting and travel platform, with hook, grab and electromagnetic configurations described for different material flows.

What does the 1:10 speed adjustment ratio tell me?

It describes the relationship within the speed adjustment range. It does not provide a lifting speed in metres per minute or establish how fast the crane travels under a particular load.

Can one crane handle hook, grab and electromagnetic work?

Those lifting configurations are available, but the ordered crane must be designed for the required handling modes. A different attachment can change suspended mass, duty, electrical connections and control functions.

Does IP55 apply to the complete KSMHS crane?

IP55 applies to the heavy-duty electrical connectors. Cabinet, motor and attachment protection are chosen separately to suit their locations and the site's exposure to dust, moisture and weather.

How is a grab or magnet configuration sized?

Sizing begins with the complete suspended mass and working cycle. For a grab, that includes grab self-weight, contents and rigging; material density and volume affect each lift.

Does variable-frequency control guarantee a positioning accuracy?

Variable-frequency control supports a smooth approach and speed adjustment. The achieved positioning also depends on the load, operator, attachment, runway and control arrangement; a required accuracy belongs in the agreed performance scope.

How much clearance does the top-running trolley need?

Check the highest required load position together with the rigging, bridge, trolley and servicing space. Roof members and other obstructions define the remaining envelope around the selected KSMHS arrangement.

What should be included when ordering several lifting attachments?

The offer should identify each handling mode, attachment weight, connection, electrical function and changeover arrangement. Useful payload and duty must remain suitable for each mode rather than being assumed identical across attachments.

08 / YOUR KSMHS GANTRY PROJECT

Get a quotation
for your KSMHS crane.

Tell us what you lift, the approximate span, the required lifting height and your destination. If a dimension is unknown, describe the task and leave that field open.

  • An arrangement matched to the lifting task
  • A clear equipment and service scope
  • Delivery and support terms in the offer

info@cranehenanmine.com

PRODUCT SELECTEDKSMHS New-Design Double-Girder Electric Hoist Gantry Crane

Not sure about a dimension? Leave it blank. A site sketch is helpful when available.

KSMHS gantry craneDiscuss your lifting task
Request a quote ↗
KSMHS equipment gallery
Enlarged KSMHS crane image

↑