Where it fits
Hazardous bays needing a double-girder bridge and electric-hoist lifting.
HENAN MINE CRANE / EXPLOSION-PROOF OVERHEAD CRANES
Explosion-Proof Electric-Hoist Double-Girder Crane
Double-girder coverage with an explosion-proof hoist.
A seated explosion-proof electric hoist on a trolley gives a compact double-girder lifting path. Compare headroom and wheel loads with the building before locking down the hoist and protection specification.
LHBModel designation1–10 tRated load selection
PRODUCT CONFIGURATION / LHBTHE LIFTING TASK
Designed for your handling path.
A seated explosion-proof electric hoist on a trolley gives a compact double-girder lifting path. Compare headroom and wheel loads with the building before locking down the hoist and protection specification.
Crane arrangement
Top-running double girder with Seated explosion-proof electric hoist.
MODEL LHB
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity1–10 t
Crane span7.5–28.5 m
Lifting height6–20 m
Duty classA3–A5
Hoisting speed2–10 m/min
Bridge / structureTop-running double girder
Lifting systemSeated explosion-proof electric hoist
Power reference380 V / 50 Hz; 220–660 V / 60 Hz listed as options
ControlConfirm pendant, remote or cabin arrangement and its protection
Protection / markingSet from approved area classification and exact equipment certificates
Runway and building interfaceCheck runway geometry, wheel loads and building reactions
Hook approach and clearanceConfirm required lifting envelope against the site drawings
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Hazardous bays needing a double-girder bridge and electric-hoist lifting.
Compare the Explosion-Proof Overhead Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Runway and building interface
Confirm runway centers, wheel loads, building clearances and hook approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Hoist position, hook approach, hazardous marking and runway loads.
PRODUCT PHOTOS
See the LHB configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a LHB crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
