Where it fits
Steel and metallurgical works
HENAN MINE CRANE / GANTRY CRANES
Metallurgical Gantry Crane
MGY is a rail-mounted metallurgical gantry for steelworks and foundries handling hot process loads. Size the bridge and hoisting system around the ladle or material mass, radiant heat, lift route and high-duty operating cycle; specify heat shielding and redundant safety devices for the actual process.
MGYModel designation5–200 tRated load selection
PRODUCT CONFIGURATION / MGYTHE LIFTING TASK
Designed for your handling path.
MGY is a rail-mounted metallurgical gantry for steelworks and foundries handling hot process loads. Size the bridge and hoisting system around the ladle or material mass, radiant heat, lift route and high-duty operating cycle; specify heat shielding and redundant safety devices for the actual process.
Crane arrangement
Metallurgical gantry with Process lifting device.
MODEL MGY
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity5–200 t
Crane span10.5–31.5 m
Lifting height6–20 m
Duty classA6–A8
Bridge / structureMetallurgical gantry
Lifting systemProcess lifting device
Power reference380 V / 50 Hz / three-phase AC
Ambient temperature−20 to +50 °C
Control arrangementPendant or radio remote to suit operator visibility
Runway and foundationsCheck rail gauge, wheel loads and foundation design
Hook approach and clearanceConfirm required lifting envelope against the site drawings
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Steel and metallurgical works
Compare the Gantry Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Rails and working envelope
Confirm rail gauge, runway length, foundation capacity, cantilever and end approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Load temperature; duty; safety requirements
PRODUCT PHOTOS
See the MGY configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a MGY crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
EXPLORE THE RANGE
View Gantry Cranes ↗
