Where it fits
Machining bays, stores, assembly stations and maintenance areas with a suitable suspended runway.
HENAN MINE CRANE / UNDERHUNG SINGLE-GIRDER CRANES
LX Electric Single-Girder Suspension Crane
Keep the floor open for production.
LX pairs a suspended single girder with an electric hoist for repeated material transfer in ordinary workshop and warehouse conditions. The runway attaches to an engineered building support rather than a separate floor-level crane column line.
LXModel designation0.5 / 1 / 2 / 3 / 5 / 10 tRated load selection
PRODUCT CONFIGURATION / LXTHE LIFTING TASK
Designed for your handling path.
LX pairs a suspended single girder with an electric hoist for repeated material transfer in ordinary workshop and warehouse conditions. The runway attaches to an engineered building support rather than a separate floor-level crane column line.
Crane arrangement
Underhung Single-Girder Cranes.
MODEL LX
Technical configuration
Size the crane against the load, installation geometry and work cycle. The final equipment schedule follows the project drawings and operating brief.
Rated capacity · LX reference configurations0.5 / 1 / 2 / 3 / 5 / 10 t
Crane span · reference options3–16 m; available combinations depend on capacity and runway design
Lifting height · reference options6 / 9 / 12 / 18 m
Duty class · reference configurationsA3–A5
Hoisting speed · 0.5–5 t CD1 / MD18 m/min single-speed / 8 and 0.8 m/min dual-speed
Hoisting speed · 10 t CD1 / MD17 m/min single-speed / 7 and 0.7 m/min dual-speed
Hoist trolley travel · CD1 / MD120 / 30 m/min
Crane travel · reference configurations20 or 30 m/min
Catalogue power supplyThree-phase AC 380 V / 50 Hz
Support arrangementSuspended runway fixed to the building structure; verify the support reactions
BUYER'S SELECTION GUIDE
Specify the crane around the job.
Machining bays, stores, assembly stations and maintenance areas with a suitable suspended runway.
Compare the Underhung Single-Girder Cranes range ↗Load and lifting attachment
Share the maximum lifted mass, load dimensions, center of gravity and any grab, magnet, spreader or lifting beam.
Runway and building interface
Confirm runway centers, wheel loads, building clearances and hook approaches.
Duty and controls
State typical load, lifts per hour, travel distance, shifts, control position and site power supply.
Model-specific check
Confirm the roof or column support, runway centers, end approach and upper hook position before fixing the span.
PRODUCT PHOTOS
See the LX configuration.
Review the equipment arrangement alongside your proposed site layout and lifting route.
TALK TO OUR ENGINEERS
Get a LX crane proposal.
Send the load schedule and site drawings. We can configure the crane, lifting system and installation interface for your operating conditions.
Request a technical proposal ↗- Maximum lifted load and attachment
- Span, travel length and available clearances
- Daily lifting cycle and control choice
- Power supply, environment and destination
