200 t Casting Cranes for Jinhui Group’s Steelmaking Hot Trial
Two 200 t four-girder casting cranes supported a successful hot trial within an eight-crane heavy-lifting package.
The project and its handling task.
Jinhui Group’s green and intelligent upgrade project used an eight-unit package of large-capacity four-girder casting overhead cranes designed and manufactured by Henan Mine Crane.
Two 200 t cranes supported the project’s hot trial. They lift filled steel ladles for refining operations, with precise speed regulation and sensor-based monitoring, fault detection and control functions.
Support steel-ladle transfer through hot commissioning and routine refining.
Refining depends on predictable movement of full steel ladles between treatment stations; a missed lift interrupts the process.
Record pickup, refining and set-down points with clearances.
Set travel and hoisting behavior for steady handling at full load.
Test alarm, fault response and movement through hot commissioning.
Test alarm, fault response and movement through hot commissioning.
The equipment behind this project.
Two 200 t cranes supported the project’s hot trial. They lift filled steel ladles for refining operations, with precise speed regulation and sensor-based monitoring, fault detection and control functions.
- Heavy casting-crane package8 four-girder casting overhead cranes
- Hot-trial equipment2 cranes rated 200 t
- Process dutyFilled steel-ladle handling for refining
- Control functionsPrecise speed regulation and sensor-based fault monitoring
What to compare with your own project.
Match the project configuration to your load, layout and operating sequence before selecting a crane package.
| Design area | This project configuration | Define for your site |
|---|---|---|
| Heavy casting-crane package | 8 four-girder casting overhead cranes | Filled ladle and spreader mass. Define the required operating envelope and acceptance checks in your technical brief. |
| Hot-trial equipment | 2 cranes rated 200 t | Refining bay and runway geometry. Define the required operating envelope and acceptance checks in your technical brief. |
| Process duty | Filled steel-ladle handling for refining | Duty cycle and heat exposure. Define the required operating envelope and acceptance checks in your technical brief. |
| Control functions | Precise speed regulation and sensor-based fault monitoring | Commissioning and fault-monitoring plan. Define the required operating envelope and acceptance checks in your technical brief. |
See the equipment and working environment.
Explore the equipment arrangement and handling environment.
Hot trial completed.
The hot trial was completed successfully with the two 200 t casting cranes supporting the refining sequence. The milestone demonstrates their role in the plant’s transition from installation to hot-process operation.
For a similar project, plan dedicated four-girder casting cranes for the filled-ladle route. Match controlled speed and monitoring to the furnace and refining positions, then test the installed system against the plant's operating sequence.
Continue from the project to the right crane family.
Use the project as a reference and specify the crane against your own yard layout and cargo.
Prepare a comparable crane quotation.
Share the load schedule and site drawings. Plan dedicated four-girder casting cranes for the filled-ladle route. Match controlled speed and monitoring to the furnace and refining positions, then test the installed system against the plant's operating sequence.
We can quote a single crane or a coordinated fleet. The offer sets out the destination standards, required certificates and inspection records, manufacturing programme after drawing approval, shipment, installation support and agreed acceptance scope.
- Filled ladle and spreader mass
- Refining bay and runway geometry
- Duty cycle and heat exposure
- Commissioning and fault-monitoring plan
- Destination standards, quantity and inspection documentation
- Manufacturing programme, shipment, commissioning, training and spares
Questions before specifying a similar crane.
Can the same project crane be supplied for my site?
We customize the capacity, span, lifting height, attachment and controls to the load, building or yard layout and operating cycle. Filled ladle and spreader mass is one of the inputs to review before final equipment selection.
How are certification, quantity and lead time agreed?
Single-crane and fleet enquiries are welcome. Define the destination and required standards in the enquiry. The project offer confirms certification and inspection documents, the quantity, drawing approval and manufacturing schedule, with the shipping and site-service boundaries.
What should acceptance and after-sales support include?
Agree the inspection plan, representative load and functional tests, operator training, maintenance instructions, spare-parts scope and fault-recovery procedures. For this application, include commissioning and fault-monitoring plan in the technical review.
Planning a similar lifting project?
Send your layout, load and operating requirements. We can develop a customized crane package and delivery scope for your site.