Skip to content
Henan mine crane co., ltd. Get a project quote
Henan Mine Crane · Electric-hoist lifting

Electric-Hoist Gantry Cranes

Electric-hoist gantry cranes handle components, stock and loading tasks along a rail route. Compare single-girder, double-girder and semi-gantry layouts by load, hook coverage, lifting height and the support space available.

Manufacturer rendering of the Single Girder Electric Hoist Gantry Crane (MH)

Single Girder Electric Hoist Gantry Cranes

Standard, L-leg, truss and European-style options for component transfer and loading.

Manufacturer rendering of the Single Girder Electric Hoist Gantry Crane (MH)
MH series

Single Girder Electric Hoist Gantry Crane (MH)

Everyday component handling and vehicle loading on two ground rails.

Capacity options3 / 5 / 10 / 16 / 20 t
Span options12–30 m, by capacity
Lifting height6 m or 9 m
All specifications
Model MH
Rated capacity 3 / 5 / 10 / 16 / 20 t
Span options 12 / 16 / 20 / 24 m; 30 m on 5–20 t configurations
Lifting height 6 m or 9 m
Working class A3 at 3–16 t; 20 t duty selected with the HC hoist package
Girder construction Welded box girder / full gantry
Hoist type, 3–10 t CD1 single-speed or MD1 dual-speed wire-rope hoist
Hoist type, 16 / 20 t CD1 at 16 t; HC at 20 t
Hoisting speed, 3 / 5 t 8 m/min or 8 / 0.8 m/min
Hoisting speed, 10 t 7 m/min or 7 / 0.7 m/min
Hoisting speed, 16 / 20 t 3.5 m/min
Hoist cross-travel speed 20 m/min
Hoist motor, 3 / 5 t 4.5 kW / 7.5 kW, single-speed hoist
Hoist motor, 10 / 16 / 20 t 13 kW / 13 kW / 18.5 kW, single-speed hoist
Hoist-travel motors, 3 / 5 t 0.4 kW / 0.8 kW
Hoist-travel motors, 10 / 16 / 20 t 2 × 0.8 kW / 2 × 0.8 kW / 4 × 0.8 kW
Runway rails, 3 / 5 t P24 or P38, selected with span and wheel reactions
Runway rails, 10 / 16 / 20 t P38 or P43 at 10 / 16 t; P43 or P50 at 20 t
Power supply 380 V, 50 Hz, 3-phase
Operating temperature −20°C to +40°C for the specified equipment
Operating controls Ground pendant / cabin; remote control by configuration
Cantilever arrangement With or without cantilever; outside-span reach by design
Crane runway Ground-level rails on both sides
Operating pattern Intermittent, repeated material and component handling
Manufacturer rendering of the L-Type Electric Hoist Gantry Crane (MHL)
MHL series

L-Type Electric Hoist Gantry Crane (MHL)

Long-load handling with L-shaped legs for side access and passage.

Capacity options1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options3–31.5 m
Working classA3–A5
All specifications
Model MHL
Rated capacity options 1 / 2 / 3 / 5 / 10 / 16 / 20 t
Span options 3–31.5 m, selected with the required load
Lifting-height options 6 / 9 / 12 / 18 / 24 / 30 m
Working class A3–A5, selected for the operating cycle
Lifting mechanism Electric wire-rope hoist
Girder arrangement Single girder
Supporting legs L-shaped legs for side access and load passage
Hoisting-speed options 8 or 8 / 0.8; 7 or 7 / 0.7; 3.5 or 3.5 / 0.35 m/min
Speed selection Choose one matched hoist speed package for the rated load
Crane-travel drive Three-in-one variable-frequency drive
Power supply 380 V, 50 Hz, 3-phase; site supply options
Operating controls Ground pendant / wireless remote / cabin
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Crane runway Two ground-level runway rails
Cantilever arrangement With or without cantilever
Clear passage Leg opening selected for the load and vehicle route
Hook coverage In-span lifting and agreed outside-span reach
Working motions Vertical lifting, hoist cross travel and crane long travel
Operating pattern Intermittent, repeated loading and material handling
Rail and wheel selection Matched to span, wheel reactions and foundation layout
Application focus Long loads and tasks requiring turning clearance between the legs
Manufacturer rendering of the Truss Girder Electric Hoist Gantry Crane (MHH)
MHH series

Truss Girder Electric Hoist Gantry Crane (MHH)

Outdoor material handling with an open-truss single-girder structure.

Capacity range1–20 t
Span range10–30 m
Working classA3–A5
All specifications
Model MHH
Rated capacity range 1–20 t, with the required configuration selected together
Span range 10–30 m
Lifting-height reference 10 m; other requirements reviewed with the crane layout
Working class A3–A5
Lifting mechanism Electric wire-rope hoist
Main-girder structure Open truss welded from structural steel sections
Girder arrangement Single girder
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Crane runway Ground-level rails on both sides
Cantilever arrangement With or without cantilever
Structural selection Truss sections matched to load, span and local wind exposure
Power supply 380 V, 50 Hz, 3-phase
Operating control Ground control for the reference arrangement
Hoisting speed Specified with the selected load and electric-hoist package
Cross travel Powered electric-hoist travel along the girder
Long travel Rail travel selected for the runway length and handling cycle
Frame alternatives Fixed or travelling arrangements; bogie options by design
Working motions Vertical lifting and movement across / along the runway
Operating pattern Intermittent, repeated material and equipment handling
Transport arrangement Girder sections and assembly joints selected for delivery access
Application focus Outdoor handling where truss structure and wind exposure matter
Manufacturer rendering of the New-Design Single Girder Electric Hoist Gantry Crane (KSMH)
KSMH series

New-Design Single Girder Electric Hoist Gantry Crane (KSMH)

Component lifting and positioning with a new-design wire-rope hoist.

Capacity options5–20 t; 30 t by design
Span options10–30 m
Working classA5 reference
All specifications
Model KSMH
Rated capacity options 5 / 10 / 16 / 20 t; 30 t configuration by design
Span options 10–30 m; custom span by design
Lifting-height options 6 / 9 / 12 / 15 m; custom lift by design
Working class A5 for the reference configuration
Hoist type New-design European-style wire-rope electric hoist
Girder arrangement Single girder / full gantry
Hoisting-speed reference 7 m/min; selected for the load and working cycle
Travel-speed reference 20 m/min; final mechanism speeds in the equipment schedule
Positioning configuration Hoist and travel controls selected for pickup and set-down tasks
Power supply 380 V, 50 Hz, 3-phase; site supply options
Operating controls Pendant buttons / wireless remote, by configuration
Crane runway Two ground-level rails
Cantilever arrangement With or without cantilever
Lifting attachments Hook; grab or electromagnetic attachment by configuration
Working motions Vertical lifting, hoist cross travel and crane long travel
Load-dependent operation Heavy-load slow / light-load fast operation with the selected package
Core-component layout Modular design with replaceable wheels and couplings
Headroom and approach Hoist envelope and upper hook position checked against the bay
Rail and foundation interface Selected wheel reactions and rail geometry define the civil interface
Operating pattern Intermittent, repeated loading and material handling
Application focus Workshop and yard tasks comparing a new-design hoist package

Double Girder Electric Hoist Gantry Cranes

Two-girder layouts with an electric-hoist lifting package for production and yard handling.

Manufacturer rendering of the Double Girder Electric Hoist Gantry Crane (MHS)
MHS series

Double Girder Electric Hoist Gantry Crane (MHS)

Double-girder electric-hoist lifting for yard loading and component transfer.

Capacity range3–50 t
Span range7.5–35 m
Lifting height4–30 m
All specifications
Model MHS
Rated lifting capacity 3–50 t
Span 7.5–35 m
Lifting height 4–30 m
Girder arrangement Double girder
Runway/support layout Full gantry; ground rails on both sides
Lifting mechanism Electric hoist
Hoist/trolley arrangement Seated electric-hoist trolley
Lifting attachment Hook
Working class A-class selected for the load spectrum and operating cycle
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive Motor / gearbox / brake package matched to duty and wheel reactions
Operating controls Pendant / wireless remote / cabin options
Cantilever arrangement With or without cantilever
Electrical supply 380 V / 50 Hz; 220–660 V / 50–60 Hz supply options
Electrical protection IP54 option; protected equipment scope defined in the electrical schedule
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Site layout Overall height, leg clearance and hook approach shown in the crane drawing
Manufacturer rendering of the New-Design Double Girder Electric Hoist Gantry Crane (KSMHS)
KSMHS series

New-Design Double Girder Electric Hoist Gantry Crane (KSMHS)

Top-running electric-hoist lifting with variable-speed hoisting and travel.

Hoist arrangementTop-running electric-hoist trolley
Motion controlVariable-frequency lifting & travel
Working classA3–A5
All specifications
Model KSMHS
Rated lifting capacity Selected for the complete suspended load, including rigging
Span Rail-centre span selected for the working area
Lifting height Hook travel and headroom selected for pickup / set-down levels
Girder arrangement Double girder
Runway/support layout Full gantry; ground rails on both sides
Lifting mechanism Electric hoist
Hoist/trolley arrangement Top-running electric-hoist trolley
Lifting attachment Hook / grab / electromagnetic lifting configurations
Working class A3–A5
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive / motion control Variable-frequency lifting and travel
Operating controls Operator control package selected for visibility and the lifting task
Cantilever arrangement With or without cantilever
Electrical supply Site voltage, phases, frequency and power feed matched in the electrical package
Electrical connectors Heavy-duty electrical plug connectors: IP55
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Speed adjustment ratio 1:10

Electric Hoist Semi Gantry Cranes

One ground rail and one elevated runway for lifting alongside a workshop structure.

Manufacturer rendering of the Double Girder Electric Hoist Semi-Gantry Crane (MB₁)
MB₁ series

Double Girder Electric Hoist Semi-Gantry Crane (MB₁)

Double-girder lifting alongside a building-supported runway and floor rail.

Support layoutElevated runway + floor rail
Girder layoutDouble girder
Working classA3–A5
All specifications
Model MB₁
Rated lifting capacity Selected for the complete suspended load, including rigging
Span Rail-centre span selected for the working area
Lifting height Hook travel and headroom selected for pickup / set-down levels
Girder arrangement Double girder
Runway/support layout Semi-gantry; one elevated runway and one ground rail
Lifting mechanism Electric hoist
Hoist/trolley arrangement Electric-hoist trolley on twin girders
Lifting attachment Hook / grab / electromagnetic lifting configurations
Working class A3–A5
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive / motion control Three-in-one direct-connected crane and trolley travel drives
Operating controls Pendant / wireless remote; cabin or PLC-linked control by configuration
Cantilever arrangement With or without cantilever
Electrical supply Site voltage, phases, frequency and power feed matched in the electrical package
Electrical protection Cabinet, motor and connector protection selected for the environment
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Site layout Overall height, leg clearance and hook approach shown in the crane drawing
Manufacturer rendering of the New-Design Single Girder Electric Hoist Semi-Gantry Crane (KSMB)
KSMB series

New-Design Single Girder Electric Hoist Semi-Gantry Crane (KSMB)

Single-girder semi-gantry lifting for workshop loading and material transfer.

Capacity range1–32 t
Span range6–35 m
Lifting height4–20 m
All specifications
Model KSMB
Rated lifting capacity 1–32 t
Span 6–35 m
Lifting height 4–20 m
Girder arrangement Single girder
Runway/support layout Semi-gantry; one elevated runway and one ground rail
Lifting mechanism Electric hoist
Hoist/trolley arrangement European-style electric hoist; suspended travel arrangement shown
Lifting attachment Hook / grab / electromagnetic chuck options
Working class A3–A5
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive / motion control Three-in-one direct-connected travel drive; variable-frequency lifting/travel
Operating controls Cabin / pendant / wireless remote / PLC linkage options
Cantilever arrangement With or without cantilever
Electrical supply 380 V / 50 Hz; 220–660 V / 50–60 Hz supply options
Electrical protection IP54 option; protected equipment scope defined in the electrical schedule
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Speed adjustment ratio 1:10
Reducer gear tooth hardness ≥60 HRC
Site layout Overall height, leg clearance and hook approach shown in the crane drawing
Manufacturer rendering of the New-Design Double Girder Electric Hoist Semi-Gantry Crane (MBES)
MBES series

New-Design Double Girder Electric Hoist Semi-Gantry Crane (MBES)

Double-girder semi-gantry handling with a new-design electric-hoist package.

Support layoutElevated runway + floor rail
Girder layoutDouble girder
Working classA3–A5
All specifications
Model MBES
Rated lifting capacity Selected for the complete suspended load, including rigging
Span Rail-centre span selected for the working area
Lifting height Hook travel and headroom selected for pickup / set-down levels
Girder arrangement Double girder
Runway/support layout Semi-gantry; one elevated runway and one ground rail
Lifting mechanism Electric hoist
Hoist/trolley arrangement Top-running electric-hoist trolley
Lifting attachment Hook / grab / electromagnetic lifting configurations
Working class A3–A5
Lifting speed Lifting and positioning speeds matched to the selected electric hoist
Trolley travel speed Cross-travel speed and stopping control selected for the load route
Crane travel speed Long-travel speed selected for the runway and operating cycle
Travel drive / motion control Three-in-one direct-connected crane and trolley travel drives
Operating controls Pendant / wireless remote options
Cantilever arrangement With or without cantilever
Electrical supply Site voltage, phases, frequency and power feed matched in the electrical package
Electrical protection Cabinet, motor and connector protection selected for the environment
Runway rail profile Rail section matched to wheel geometry, reactions and supporting structure
Motor ratings Lifting, trolley and crane-travel motor ratings specified in the equipment schedule
Operating pattern Intermittent, repeated loading/unloading and material handling
Site layout Overall height, leg clearance and hook approach shown in the crane drawing

Grab and Explosion Proof Hoist Gantry Cranes

Material-specific lifting for loose bulk cargo or classified hazardous environments.

Manufacturer rendering of the Grab and Hook Electric Hoist Gantry Crane (MHZE)
MHZE series

Grab and Hook Electric Hoist Gantry Crane (MHZE)

Grab-and-hook lifting for loose bulk material and general cargo.

Handling modesGrab and hook
Attachment interfaceDedicated quick connection
Rated loadSpecified for each handling mode
All specifications
Model MHZE
Lifting system Electric-hoist gantry arrangement
Handling modes Grab for bulk material; hook for general cargo
Attachment changeover Dedicated quick-connection mechanism for grab / hook exchange
Grab application Bulk material such as coal or ore; select the grab for your material
Hook application Components and general cargo handled by hook
Rope-grab arrangement Coordinated supporting and opening / closing ropes, where specified
Grab actuation Hydraulic or mechanical, selected with the grab package
Grab opening / closing 3–5 s for the matched grab configuration; confirm material and operating conditions
Hook-mode load Rate for the complete hook-lifted load, including slings and lifting attachments
Grab-mode suspended load Check grab self-weight plus the material carried and connecting equipment
Grab volume and material Select from material density, particle size and required load per cycle
Duty and cycle Define lifts per hour, shifts and load spectrum for both handling modes
Span and runway Set rail-centre span and travel length from the loading / discharge route
Usable lifting height Specify pickup level, discharge height and the selected grab's closed height
Lifting speed Quote loaded and positioning speeds for the selected attachment and duty
Trolley and crane travel Select travel speed and stopping control for the loading and discharge positions
Wheel manufacture Forging and rolling combined process
Transmission coupling Crowned gear coupling
Maintenance arrangement Modular design with replaceable core components
Operating control Operator position and grab / hook control functions selected for the work area
Power interface Site voltage, frequency and phases; separate grab power / control interface where required
Manufacturer rendering of the Explosion-Proof Electric Hoist Gantry Crane (BMH)
BMH series

Explosion-Proof Electric Hoist Gantry Crane (BMH)

Hook lifting for sites requiring an assessed explosion-protection package.

Hoisting equipmentExplosion-proof electric hoist
Support layoutTwo ground-level rails
Working classA3
All specifications
Model BMH
Working class A3
Lifting mechanism Explosion-proof electric hoist
Lifting attachment Hook
Crane support and runway Two supporting leg frames running on ground rails
Working motions Hoisting, hoist cross travel and crane long travel
Cantilever arrangement With or without cantilever; specify the outside-span lifting reach
Operating control Cab, ground or remote arrangement
Operating pattern Intermittent, repeated loading and material handling
Crane-travel drive layout Vertically arranged travel gearing
Rated suspended load Select for the heaviest complete hook load, rigging and attachment
Rail-centre span Define from the two runway lines and required hook coverage
Lifting height and hook reach State pickup / set-down levels, upper hook position and approach limits
Hoisting speed Match lifting and positioning speed to the selected protected hoist
Trolley and crane speeds Specify loaded travel, approach speed and stopping needs
Site power supply Provide voltage, frequency, phases and power-feed arrangement
Hazardous-area classification State hazardous medium, zone, gas / dust group and temperature requirement
Protection package Define the hoist, travel equipment, controls and accessories for the same area
Applicable standard and documents Agree destination standard, equipment marking and model-specific protection documents
Rails and foundation interface Request final rail section, wheel reactions and foundation / outdoor load cases

Capacity, span, lifting height, duty and speeds are selected together. Include all suspended lifting attachments and rigging in the load.

Budget planning

Electric-hoist gantry crane price guide

Plan the crane equipment budget around capacity, span and useful lifting height. The ranges below assume a standard rail-mounted hook crane with an electric wire rope hoist, powered travel and pendant control.

Preliminary equipment budget · USD per crane · 26 October 2026
Planning configurationBudget range · USD
5 t single-girder electric-hoist gantry · 10–15 m span · 6 m liftUS$9,000–16,000
5 t single-girder electric-hoist gantry · 20–30 m span · 6–9 m liftUS$14,000–24,000
10 t single-girder electric-hoist gantry · 15–25 m span · 6–9 m liftUS$17,000–30,000
20 t electric-hoist gantry · 15–25 m span · 6–9 m liftUS$28,000–48,000

These are preliminary planning estimates for the crane steelwork, hoist and trolley, travel drives, electrical controls and technical documents. They are not firm quotations or installed prices. The selected girder, support arrangement, duty and wheel loads must be confirmed together in the technical offer.

Runway rails, foundations, civil work, building supports, site power feed, freight, import duties, taxes, erection and commissioning are excluded. Cantilevers, higher duty, outdoor wind design, anti-corrosion treatment, variable-frequency drives and explosion protection can place the package outside these ranges. Semi-gantries require a separate building-interface and equipment quotation.

Get a quote for your configuration
Illustrative selection example

Sizing a crane for fabricated components

A 4.6 t component plus 0.25 t of complete below-hook lifting gear creates a 4.85 t suspended load. A 5 t capacity is a starting point for evaluation; lifting frequency and the selected hoist duty still need review.

The next checks are useful hook coverage, load passage between the legs, pickup height and outdoor conditions. Two ground rails suit a full gantry; one elevated runway calls for a semi-gantry assessment. This is a selection example, not a completed customer project.

Discuss your lifting layout
MH electric-hoist gantry crane family photograph showing a complete crane on ground rails
MH series photograph for layout reference; not a photograph of the illustrative selection example.

Electric-hoist gantry crane buying questions

Which electric-hoist gantry crane layout fits my site?

Full gantries run on two ground rails. Semi gantries use one ground rail and one elevated runway. L-leg layouts provide a different side opening; compare the loaded hook path, leg clearance and vehicle route.

How do I choose the lifting capacity?

Add the heaviest workpiece, lifting beam, grab or other attachment, and all suspended rigging. Select the crane and hoist for that complete load, then confirm duty from lift frequency and shifts.

Are all listed capacities, spans and heights available together?

No. Published options describe the model range. The quotation and drawing confirm one compatible capacity, span, lift, speed and duty combination, including hook approaches and wheel loads.

What must be specified for an explosion proof gantry crane?

Provide the hazardous-area classification, gas or dust group, temperature class and ambient conditions. The BMH package and certification scope must match that classification; an explosion proof hoist alone does not define the suitability of the complete crane.

What information is needed for an accurate quotation?

Send the total suspended load, rail-centre span, useful hook height, runway length, lifts per hour, power supply and destination. Add any cantilever reach, outdoor exposure, building support or special attachment requirements.

Compare the range

Electric-hoist gantry crane specification comparison

Compare the layout, capacity, span, useful lifting height and duty. Select a full product name to view its details.

Swipe across the table to compare specifications.

Model / product Arrangement Capacity Span / working width Lifting height Working class
Single Girder Electric Hoist Gantry Crane (MH) Single girder / full gantry 3 / 5 / 10 / 16 / 20 t 12–30 m, by capacity 6 m or 9 m A3 at 3–16 t; 20 t by hoist selection
L-Type Electric Hoist Gantry Crane (MHL) Single girder / L-leg full gantry 1 / 2 / 3 / 5 / 10 / 16 / 20 t 3–31.5 m 6 / 9 / 12 / 18 / 24 / 30 m A3–A5, selected for the operating cycle
Truss Girder Electric Hoist Gantry Crane (MHH) Single girder / truss full gantry 1–20 t 10–30 m 10 m reference A3–A5
New-Design Single Girder Electric Hoist Gantry Crane (KSMH) Single girder / new-design full gantry 5–20 t; 30 t by design 10–30 m 6 / 9 / 12 / 15 m A5 reference
Double Girder Electric Hoist Gantry Crane (MHS) Double girder / full gantry 3–50 t 7.5–35 m 4–30 m Selected for the load spectrum and cycle
New-Design Double Girder Electric Hoist Gantry Crane (KSMHS) Double girder / new-design full gantry Project-specific To suit the runway To suit the task A3–A5
Double Girder Electric Hoist Semi-Gantry Crane (MB₁) Double girder / semi-gantry Project-specific To suit the runway To suit the task A3–A5
New-Design Single Girder Electric Hoist Semi-Gantry Crane (KSMB) Single girder / new-design semi-gantry 1–32 t 6–35 m 4–20 m A3–A5
New-Design Double Girder Electric Hoist Semi-Gantry Crane (MBES) Double girder / new-design semi-gantry Project-specific To suit the runway To suit the task A3–A5
Grab and Hook Electric Hoist Gantry Crane (MHZE) Grab and hook / full gantry Project-specific To suit the runway To suit the task Project-specific
Explosion-Proof Electric Hoist Gantry Crane (BMH) Explosion-proof / full gantry Project-specific To suit the runway To suit the task A3

Ranges and catalogue options are not a promise of every possible combination. The technical offer confirms the selected equipment, dimensions, operating conditions and supply scope.

Get an electric-hoist gantry crane quote

Send the load, span, useful lifting height and destination. Add a site sketch and operating cycle if available.

The offer should identify the hoist package, crane structure, rails, power feed, delivery terms and site-service responsibilities.

Request a quotation